You are here

Home » Reports

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 572 results
 
  • Record 1 TO 572

  1. LOW DENSITY STRUCTURE FOR AIRBORNE PLATFORMS

    SBC: AEREON CORP.            Topic: N/A

    DEFINITIONS ARE REQUIRED OF STRUCTURAL WEIGHT FRACTIONS FOR DELTOID AEROBODY PLATFORMS IN ORDER TO ASSESS THEIR POTENTIAL. PRIOR DATA ON CONVENTIONAL AIRPLANES AND ZEPPELINS CANNOT BE INTERPOLATED OR EXTRAPOLATED WITH CONFIDENCE TO PROVIDE THE REQUIRED DEFINITION. THEREFORE, STRUCTURAL DESIGN STUDIES WILL BE MADE ESPECIALLY FOR THIS SHAPE, MASS DISTRIBUTION AND AIRLOAD. MODERN HIGH-STRENGTH AND ST ...

    SBIR Phase II 1988 Department of DefenseAir Force

  2. VAPOR COATING OF BORON FUEL PARTICLES BY MAGNESIUM

    SBC: Aerochem Research            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseNavy

  3. DIRECT COMPUTATION OF TURBULENCE NOISE

    SBC: Aerochem Research            Topic: N/A

    N/A

    SBIR Phase I 1988 National Aeronautics and Space Administration

  4. SBIR Phase I: Photovoltaic Laser Annealing System

    SBC: AMBP Technology Corporation            Topic: AM

    The Small Business Innovation Research (SBIR) Phase I project proposes to achieve recently reported gains in CIGS solar cell efficiency from in-situ laser deposition, by using an ex-situ laser annealing approach that is compatible with an existing pilot manufacturing system. The proposed ex-situ approach will not need to heat the substrate above the 425C value used to manufacture CIGS solar cells ...

    SBIR Phase I 2008 National Science Foundation

  5. HIGH DYNAMIC RANGES MIXERS

    SBC: Anadigics Inc            Topic: N/A

    HIGH DYNAMIC RANGE MIXERS ARE BECOMING MORE IMPORTANT AS THE COMPLEXITY OF THE ELECTRONIC WARFARE SYSTEMS INCREASE. SINCE IT IS USUALLY THE FIRST OR SECOND DEVICE FROM THE RF INPUT, THE PERFORMANCE OF THE MIXER IS CRITICAL IN THE OVERALL OPERATION OF THE SYSTEM. THE DESIGN OF THE PRESENT DAY MIXERS IN THE MILLIMETER WAVEBANDS ARE BASED ON SCHOTTKY BASED DIODES IN THE SELF BIAS MODE AND ADVANCEMENT ...

    SBIR Phase I 1988 Department of DefenseAir Force

  6. DEVELOPMENT OF A HUMANE TATTOO SYSTEM FOR VISUAL AND INSTRUMENTAL PERMANENT IDENTIFICATION OF SMALL RODENTS.

    SBC: ANALIZA, INC.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of Health and Human Services

  7. Vegetable oil based gel materials for cosmetic, toiletry, and candle markets

    SBC: APPLECHEM INC            Topic: N/A

    As a nation, we are faced with multiple challenges from global climate warming, rapid depletion of fossil oil, a strong desire to become independent from foreign oils, and a moral obligation to preserve our environment for future generations. In response to these challenges, many consumers have changed their purchasing behavior, preferring bio-based products over fossil-based products with a willi ...

    SBIR Phase II 2008 Department of Agriculture

  8. AN INVESTIGATION OF NEW METHODS TO GENERATE AN ANTHROPOMETRIC DATABASE AND TO RESOLVE GARB FIT PROBLEMS

    SBC: Arkline Research            Topic: N/A

    THE PURPOSE OF THE EFFORT PROPOSED HEREIN IS TO DEFINE THE PROCEDURES TO ESTABLISH AN ANTHROPOMETRIC DATABASE WHICH CAN BE ADDED TO ON A CONTINUOUS BASIS, AND WHICH WILL PROVIDE THE INFORMATION NEEDED BY VARIOUS USERS IN ORDER TO GUARANTEE THE FIT OF GARB WORN BY MILITARY PERSONNEL. TO MEET THAT END, SPECIFIC FIT PROBLEMS WILL BE STUDIED IN ORDER TO DETERMINE THEIR CAUSE. BY EXPERIENCED AND SPECIA ...

    SBIR Phase I 1988 Department of DefenseAir Force

  9. MICROWAVE REMEDIATION OF HAZARDOUS MEDICAL WASTES

    SBC: Ashwin-Ushas Corporation            Topic: N/A

    DESCRIPTION (provided by applicant): This project proposes to build and test a 20 L capacity Remediator for medical wastes. Infectious Medical Wastes (IMW), mainly from hospitals, represents a major component of hazardous wastes generated in the U.S.. In f act, more than 4.5 million tons are generated per year. Hospital waste remediation was a 1.5 billion industry in 2003. Incineration remains th ...

    SBIR Phase II 2008 Department of Health and Human ServicesNational Institutes of Health

  10. AN EXPENDABLE DEVICE FOR MEASURING SUPERCOOLED LIQUID WATER IN CLOUDS

    SBC: Atek Data Corp            Topic: N/A

    N/A

    SBIR Phase I 1983 Department of DefenseArmy
US Flag An Official Website of the United States Government