Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Combined Cleaning and Guided Wave Inspection System for Hazardous Liquid Pipelines

    SBC: ULC Robotics, Inc.            Topic: 180PH2

    Combined Cleaning and Guided Wave Inspection System for Hazardous Liquid Pipelines 3/20/2018 For this SBIR we will develop a machine vision system which uses onboard standard-resolution cameras in vehicles to identify and read barcode signs on the roadside. The proposed approach could provide a low-cost solution that make connected and automated vehicle (CAV) technology viable for rural areas ...

    SBIR Phase I 2018 Department of Transportation
  2. Memory Instrumentation and Performance Simulation (MIPS)

    SBC: ATC-NY, Inc.            Topic: DTRA172003

    Next-generation high-performance computing (HPC) hardware, such as the Intel Xeon Phi Knights Landing Many-Integrated-Core processor, provide new deep memory architectures that offer the promise of increased performance. The challenge in taking full advantage of this architecture is selecting which data structures will be placed in the high-bandwidth memory. Optimizing data structure placement in ...

    SBIR Phase I 2018 Department of DefenseDefense Threat Reduction Agency
  3. A Robust, Machine Independent, Software Toolkit for Topology Aware Process Mapping on Distributed Memory HPC Architectures

    SBC: Continuum Dynamics Inc            Topic: DTRA172002

    A significant performance gap exists between the theoretical number of Floating Point Operations (FLOPS) that a HPC machine is capable of sustaining and the number of FLOPS realized by real-world HPC applications. One of the principle reasons for this gap is the parasitic work that computational processes must do to communicate with one another. It has been shown that this communication work can b ...

    SBIR Phase I 2018 Department of DefenseDefense Threat Reduction Agency
  4. Novel Methods to Measure Penetrator Dynamics in Multi-Layer Geometries

    SBC: Thornton Tomasetti, Inc.            Topic: DTRA07011

    In Phase I of this effort we analyzed the structural response of a BLU 109 during typical penetration events. Based on these finite element results, we proposed and demsonstrated a simple robust concept for a passive penetrator sensor that identifies the material being penetrated and also correlates strongly with its underground trajectory. Such a sensor would obviously provide valuable informatio ...

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  5. The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics

    SBC: Orora Design Technologies, Inc.            Topic: DTRA07005

    Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  6. Agent Defeat using a DWA Accelerator

    SBC: Brookhaven Technology Group, Inc.            Topic: DTRA08008

    A new type of compact induction accelerator currently under development at the Lawrence Livermore National Laboratory (LLNL) promises to increase the average accelerating gradient by at least an order of magnitude over that of existing induction machines. The machine is based on the use of high gradient vacuum insulators and advanced dielectric materials and switches. The system, called the Diel ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  7. Engineering Models for Damage to Structural Components Subjected to Internal Blast Loading

    SBC: Thornton Tomasetti, Inc.            Topic: DTRA08006

    Predicting the response of building components to internal detonations is more complex than the corresponding task for external loads because of the more complex loading waveforms which include multiple reflections in the shock phase followed by a long duration pseudostatic loading that depends upon room venting. Add the possibility of additional impulsive loading from primary debris. We propose t ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  8. Concrete Environmental Monitoring Sensor

    SBC: Advanced Design Consulting USA, Inc.            Topic: 07FH3

    With infrastructure costs escalating it is becoming essential to monitor the health of concrete structures so that timely maintenance can maximize their useful lives. This SBIR will demonstrate the feasibility of using a passive sensor, embedded within concrete, to measure mositure, temperature, pH and concentrations of chlorides. It will provide critical data for evaluating concrete performance s ...

    SBIR Phase I 2008 Department of Transportation
  9. PDA-Based Portable Data Collection System for Commercial Vehicle Inspection

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: 02FM1

    More than 1,300,000 Level 1 commercial vehicle inspections - a safety-critical, time-consuming, often difficult and painstaking process, especially as regards the brake inspection component -- are performed every year in the United States, under all sorts of weather and lighting conditions. The current technology used adds to the complexity and error potential inherent in this important task. In ...

    SBIR Phase II 2008 Department of Transportation
  10. Pedestrain Exposure Measurement Technology Development

    SBC: CALSPAN CORPORATION            Topic: N/A

    Calspan Corporation, located in Buffalo, NY is proposing the research and development of the technology and methodolgy that can be used to accurately measure pedestrian exposure. Existing technologies/methodologies will be analyzed, and a technology/methodolgy that focuses on an individual pedestrian's walking history will be specified. Only technologies that are small, lightweight, reliable, an ...

    SBIR Phase I 2008 Department of Transportation
US Flag An Official Website of the United States Government