Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Multi-Band Eyesafe NIR Laser for HEL Applications

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N102137

    Accurate Automation Corporation (AAC) proposes to provide a source that can meet the requirements of this present solicitation using a technical approach based on recent breakthrough technology that has made it possible to design a scalable fiber optic laser that can operate in all of the low loss windows in the eyesafe NIR band. Based on a technique whereby the fiber core is doped by nanoparticle ...

    SBIR Phase I 2010 Department of DefenseNavy
  2. Gearbox Load and Life Simulation Software

    SBC: VEXTEC CORPORATION            Topic: N091017

    The overall objective of this proposed effort is to build a gearbox system life simulator that is capable of estimating loads and life of components (e.g., recommended removal time) based on the users’ drive system design parameters (dimension, weight, diameter, number of teeth, material, loads, gear ratios, etc). This VEXTEC SBIR Phase II will take advantage of several previous DoD technology d ...

    SBIR Phase II 2010 Department of DefenseNavy
  3. Incipient Failure Detection Device For Submerged Outboard Cables

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N101057

    A hands-on research and development effort is proposed for an advanced portable cable testing system with specific monitoring and diagnostic capabilities for submerged outboard electrical cables installed in U.S. Navy surface craft and submarines. The focus in Phase I will be on design of equipment and software algorithms for in-situ detection of degradation in SubHDR Dip Loop Cabling, or other ca ...

    SBIR Phase I 2010 Department of DefenseNavy
  4. Low Loss High Power Current Lead for Cryogenic Applications

    SBC: Tai-Yang Research Company            Topic: N10AT022

    The Tai-Yang Research Company, in partnership with the Center for Advanced Power Systems at Florida State University, proposes to develop a novel solution for reducing the high heat load at the warm-to-cold electrical terminations of a high temperature superconducting cable configured for Navy ship power distribution systems. The termination design will be constrained to meet unique Navy requireme ...

    STTR Phase I 2010 Department of DefenseNavy
  5. Integral Suppressed Weapon Barrel

    SBC: INNOVATIONS PLUS, LLC            Topic: N07161

    Innovations Plus seeks to provide the marine with competitive advantages and dramatically reduce hearing damage associated with firearms. Most small arm weapons do not include any form of sound suppression nor effective flash retardant. Thus, they subject the marine to harmful levels of noise and may unnecessarily expose his position. Noise induced hearing loss is on the rise for U.S. servicemen a ...

    SBIR Phase II 2010 Department of DefenseNavy
  6. Non-Inductive Control Surface Actuator

    SBC: DYNAMIC STRUCTURES AND MATERIALS, LLC            Topic: N101096

    Dynamic Structures and Materials, LLC (DSM) proposes a novel piezoelectric ceramic motor actuator for actuating flight control surfaces such as canards in mortars and gun launched munitions. The proposed miniature piezoelectric ceramic actuation technology is based on a “inertial” vibration motor concept that has been shown to be able to produce over 15 lbf in linear applications and 2 lbf-in ...

    SBIR Phase I 2010 Department of DefenseNavy
  7. Smart Multimodal Image Registration and Fusion (SMIRF)

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: N093188

    To increase all-weather, visual search capabilities, modern submarine surface imaging systems have installed several different modality cameras in the periscope or photonic mast. The current system displays each sensor modality independently, where the operator must decide which modality is optimal for which environment, and must constantly switch between modalities to search for critical informat ...

    SBIR Phase I 2010 Department of DefenseNavy
  8. Air Flow Noise Reduction Techniques

    SBC: International Mezzo Technologies, Inc.            Topic: N07163

    The objective of this program is to develop techniques to reduce engine cooling system noise levels of the Expeditionary Fighting Vehicle (EFV). Mezzo’s approach is to redesign the engine cooling heat exchangers (LTC, HTC, fuel cooler, and condenser) using Mezzo’s heat exchanger technology to reduce the overall heat exchanger pressure drop and thus the demands on the cooling fans. Reduced pres ...

    SBIR Phase II 2010 Department of DefenseNavy
  9. Thermally Stable Machine Gun Barrel

    SBC: INNOVATIONS PLUS, LLC            Topic: N091004

    Innovations Plus, LLC is seeking to make the amount of ammunition on hand the firing rate limiter instead of the heat capacity of the barrel. The technical opportunity presented within this Phase I feasibility study is to increase the rate of fire for weapons by properly managing the heat developed in the barrels or gun tubes. Specifically, to increase the sustained rate of fire for light, medium ...

    SBIR Phase I 2010 Department of DefenseNavy
  10. Flight Video Recording and Transmission System

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    Not Available A program to demonstrate the feasibility of a single multi-hyperspectral infrared sensor capable of both missile threat warning and subpixel ground target detection is proposed. The effort will first identify candidate spectral bands/subbands for both missile threat warning and subpixel ground target detection applications. From these results, clutter rejection and subpixel target d ...

    SBIR Phase I 1999 Department of Transportation
US Flag An Official Website of the United States Government