List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. VESSEL TRACKING SYSTEM EQUIPMENT

    SBC: P F Newcomb & Associates            Topic: N/A

    N/A

    SBIR Phase II 1992 Department of Transportation
  2. A RELIABLE LOCOMITIVE CAB ALERTER

    SBC: Technology International Incorporated of Virginia            Topic: N/A

    SEVERAL CONCEPTS ARE PROPOSED FOR LOCOMOTIVE CAB ALERTERS THAT CAN BE RETROFITTED TO ALERTER SYSTEMS ALREADY IN SERVICE. THE CONCEPTS INCLUDE A TOUCH SCREEN, WHICH REQUIRES TOUCHING A TARGET TO RESET THE TIMER OR TO RESPOND TO THE ALERTER LIGHT PROMPT. THE INITIAL LOCATION OF THE TARGET ON THE SCREEN IS AUTOMATICALLY SELECTED AT RANDOM. ANOTHER CONCEPT IS THE USE OF A TELEPHONE KEYPAD WITH LCD, WH ...

    SBIR Phase I 1992 Department of Transportation
  3. 128X128 ELEMENT MONOLITHIC DUAL BAND HGCDTE STARING ARRAYS

    SBC: ADVANCED DEVICE TECHNOLOGY, INC.            Topic: N/A

    MISSILE SEEKERS MUST DETECT TARGETS IN DUAL BANDS (3-5 UM AND 8-12 UM). THEY NOW USE HYBRID ASSEMBLY OF TWO SEPARATE ARRAYS, WHICH INCREASES THE POWER, CONSUMPTION, THE WEIGHT, AND THE COST. WE WILL DEVELOP MONOLITIHIC DUAL BAND 128X128 STARING ARRAYS ON HGCDTE MATERIAL. THE INNOVATION IS THE DETECTION OF BOTH LONG AND SHORT WAVE SIGNALS IN THE SAME PIXEL SIMULTANEOUSLY. FABRICATION METHODS ARE DE ...

    SBIR Phase II 1992 Department of DefenseMissile Defense Agency
  4. Fast Room Temperature Cure Adhesive for Fiber Optic Connector

    SBC: Advanced Material Systems            Topic: N/A

    Standard U.S. Navy fiber optic assemblies require that the fiber be bonded to the connector using an adhesive that is labor intensive and heat controlled (MIL-A-24792). Advanced Material Systems (AMS) proposes a study that could solve this problem through the development of an adhesive system that would cure at room temperature in less that 3 minutes and yet meet all of the in-service req ...

    SBIR Phase I 1996 Department of DefenseNavy
  5. Submarine Electrical Hull Penetrators/Connectors

    SBC: D. G. O'brien, Inc.            Topic: N/A

    Recent trends in submarine design indicate the need for-locating more electrical components, such as propulsion motors and actuators, outside the pressure hull. As a result, there is a need for electrical hull penetrators/connectors which can transfer high currents or high voltages through the submarine's pressure hull. We propose to review the capabilities and limitations of existing penetrator/ ...

    SBIR Phase I 1996 Department of DefenseNavy
  6. Unmanned Aerial Vehicle Electronic Decoy Payload

    SBC: Dedicated Electronics, Inc.            Topic: N/A

    Enemy forces can be crippled quickly at the beginning of a war by separating the enemies command and control structure from its combat forces and other elements of its defensive network. A false target generator has the potential to saturate or tie up an enemies air defense net and increase survivability of our own airborne assets. An unmanned aerial vehicle (UAV) is an optimum candidate for a dec ...

    SBIR Phase II 1996 Department of DefenseNavy
  7. PHOTOVOLTAIC SYSTEMS BASED ON SPECTRALLY SELECTIVE CONCENTRATORS

    SBC: Northeast Photosciences, Inc.            Topic: N/A

    WE HAVE DEVELOPED A HOLOGRAPHIC DEVICE THAT GREATLY IMPROVES THE EFFICIENCY OF SOLAR ENERGY GENERATION. THE SINGLE-ELEMENT HOLOGRAM FOCUSES LIGHT TO THE SIDE AND ALSO SPECTRALLY SPLITS IT. THE OUTPUT APPEARS AS A THIN, CONCENTRATED LINE FOCUS PERPENDICULAR TO THE HOLOGRAM AND DISPLACED TO THE SIDE. DIFFERENT WAVELENGTHS ARE DIFFRACTED, CONCENTRATED, AND DISPERSED TO DIFFERENT LOCATIONS ON THE LINE ...

    SBIR Phase II 1992 Department of DefenseMissile Defense Agency
  8. Holographic AntiReflective Coating

    SBC: Northeast Photosciences, Inc.            Topic: N/A

    This is a completely new holographic technology for fabricating extremely efficient anti-reflection coatings. The holographic coating can be used on any optical surface and used alone can reduce unwanted reflections to a fraction of one percent. A holographic coating can be fabricated to be narrow bandwidth (5-50 nm) or extremely broadband. Used in conjunction with conventional antireflection coat ...

    SBIR Phase II 1996 Department of DefenseMissile Defense Agency
  9. Nonspatial Filtering of Master Oscillator Power Amplifiers (MOPA)

    SBC: Northeast Photosciences, Inc.            Topic: N/A

    We propose to design and demonstrate beam cleanup for the Master Oscillator (MO) which will allow the Power Amplifier (PA) to operate efficiently and produce a high energy beam useful as a Directed Energy Weapon (DEW). The method we describe is totally new to the DEW field. Of course for low power lasers, we can focus the beam down and pass the clean part through a pinhole spatial filter. The "noi ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  10. INNOVATIVE STIRLING CYCLE REFRIGERATOR

    SBC: CREARE LLC            Topic: N/A

    WE PROPOSE USING AN INNOVATIVE STIRLING COOLER FOR SHIPBOARD REFRIGERATION. THIS DESIGN ELIMINATES THE FRICTTON, WEAR, AND SEAL LEAKAGE PROBLEMS OF CURRENT STIRLING COOLERS, AND WILL PROVIDE A HIGH RELIABILITY, LONG-LIFE REFRIGERATOR. THE USE OF NEAR AMBIENT PRESSURE AIR AS THE WORKING FLUID MAKES THIS MACHINE ENVIRONMENTALLY BENIGN AND IMMUNE TO PROBLEMS WITH LEAKAGE IN THE COOLER ENVELOPE. THE R ...

    SBIR Phase II 1992 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government