List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. VESSEL TRACKING SYSTEM EQUIPMENT

    SBC: P F Newcomb & Associates            Topic: N/A

    N/A

    SBIR Phase II 1992 Department of Transportation
  2. A RELIABLE LOCOMITIVE CAB ALERTER

    SBC: Technology International Incorporated of Virginia            Topic: N/A

    SEVERAL CONCEPTS ARE PROPOSED FOR LOCOMOTIVE CAB ALERTERS THAT CAN BE RETROFITTED TO ALERTER SYSTEMS ALREADY IN SERVICE. THE CONCEPTS INCLUDE A TOUCH SCREEN, WHICH REQUIRES TOUCHING A TARGET TO RESET THE TIMER OR TO RESPOND TO THE ALERTER LIGHT PROMPT. THE INITIAL LOCATION OF THE TARGET ON THE SCREEN IS AUTOMATICALLY SELECTED AT RANDOM. ANOTHER CONCEPT IS THE USE OF A TELEPHONE KEYPAD WITH LCD, WH ...

    SBIR Phase I 1992 Department of Transportation
  3. Fast Room Temperature Cure Adhesive for Fiber Optic Connector

    SBC: Advanced Material Systems            Topic: N/A

    Standard U.S. Navy fiber optic assemblies require that the fiber be bonded to the connector using an adhesive that is labor intensive and heat controlled (MIL-A-24792). Advanced Material Systems (AMS) proposes a study that could solve this problem through the development of an adhesive system that would cure at room temperature in less that 3 minutes and yet meet all of the in-service req ...

    SBIR Phase I 1996 Department of DefenseNavy
  4. Linear Actuator for Missile Guidance Steering Fin Control

    SBC: AIREX CORP.            Topic: N/A

    Airex Corporation's Missile Steering Control Actuator System (MSCAS) can be directly applied to provide the high performance missile steering capability required by the Navy's High Speed Anti-Radiation Demonstration program.In the MSCAS, each missile fin is positioned by a low volume, low cost, low weight, high performance, brushless linear motor system comprised of an opposed pair of curved elect ...

    SBIR Phase I 2003 Department of DefenseNavy
  5. Metal Passivization to Resist Corrosion

    SBC: CAP Technologies LLC            Topic: N/A

    Hydrogen Plasma generated by tap water and sodium bicarbonate is designed to clean metals of oxides and organic contaminants, including paints, leaving the surface passivated against corrosion and with an anchor profile that enhances coating adhesion. Theremoval of mill scale results in two distinct benefits: a.) enhanced adhesion characteristics and b.) surface passivation against corrosion.Util ...

    SBIR Phase I 2003 Department of DefenseNavy
  6. Dual-Band Electro-Optic (EO)/Infrared (IR) Multifunctional Pod Windows

    SBC: COMPUTER OPTICS INC.            Topic: N/A

    Increasingly missions are turning to EO/IR operation requiring windows with large spectral bandpass. This large bandpass coupled with the size of the required window substrates has necessarily limited the choice of materials. Calcium Flouride is generallychosen, however it has the undesirable property that it tends to scratch quite easily. In this proposal we will discuss a proprietary method of ...

    SBIR Phase I 2003 Department of DefenseNavy
  7. Development of a Crack Resistant Durable concrete Repair Material for Navy Concrete Structures

    SBC: CONPROCO CORP.            Topic: N/A

    A large number of existing Navy concrete structures are in a state of deterioration/distress. It must also be recognized that many repaired concrete structures are severely deteriorated only after a few years having been repaired. How to halt the decayof the Navy's physical infrastructure? The durability of concrete repair must be ensured on a basis of daily practice, from the research, design, ...

    SBIR Phase I 2003 Department of DefenseNavy
  8. Submarine Electrical Hull Penetrators/Connectors

    SBC: D. G. O'brien, Inc.            Topic: N/A

    Recent trends in submarine design indicate the need for-locating more electrical components, such as propulsion motors and actuators, outside the pressure hull. As a result, there is a need for electrical hull penetrators/connectors which can transfer high currents or high voltages through the submarine's pressure hull. We propose to review the capabilities and limitations of existing penetrator/ ...

    SBIR Phase I 1996 Department of DefenseNavy
  9. Unmanned Aerial Vehicle Electronic Decoy Payload

    SBC: Dedicated Electronics, Inc.            Topic: N/A

    Enemy forces can be crippled quickly at the beginning of a war by separating the enemies command and control structure from its combat forces and other elements of its defensive network. A false target generator has the potential to saturate or tie up an enemies air defense net and increase survivability of our own airborne assets. An unmanned aerial vehicle (UAV) is an optimum candidate for a dec ...

    SBIR Phase II 1996 Department of DefenseNavy
  10. Packaging and Thermal Management for kW/cm2 Microwave Amplifiers

    SBC: International Mezzo Technologies, Inc.            Topic: N/A

    The overall goal of this project is to develop a heat removal technology to handle heat flux densities as high as 1 kW/cm2 for wide band gap SiC/GaN microwave power amplifers, which will be utilized in X- band phased array radar antennas. The technologydeveloped in Phase I is based on a large array of micro-scale impinging jets, each of which produces a very high rate of heat transfer over a loca ...

    SBIR Phase I 2003 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government