List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. VESSEL TRACKING SYSTEM EQUIPMENT

    SBC: P F Newcomb & Associates            Topic: N/A

    N/A

    SBIR Phase II 1992 Department of Transportation
  2. A RELIABLE LOCOMITIVE CAB ALERTER

    SBC: Technology International Incorporated of Virginia            Topic: N/A

    SEVERAL CONCEPTS ARE PROPOSED FOR LOCOMOTIVE CAB ALERTERS THAT CAN BE RETROFITTED TO ALERTER SYSTEMS ALREADY IN SERVICE. THE CONCEPTS INCLUDE A TOUCH SCREEN, WHICH REQUIRES TOUCHING A TARGET TO RESET THE TIMER OR TO RESPOND TO THE ALERTER LIGHT PROMPT. THE INITIAL LOCATION OF THE TARGET ON THE SCREEN IS AUTOMATICALLY SELECTED AT RANDOM. ANOTHER CONCEPT IS THE USE OF A TELEPHONE KEYPAD WITH LCD, WH ...

    SBIR Phase I 1992 Department of Transportation
  3. Fast Room Temperature Cure Adhesive for Fiber Optic Connector

    SBC: Advanced Material Systems            Topic: N/A

    Standard U.S. Navy fiber optic assemblies require that the fiber be bonded to the connector using an adhesive that is labor intensive and heat controlled (MIL-A-24792). Advanced Material Systems (AMS) proposes a study that could solve this problem through the development of an adhesive system that would cure at room temperature in less that 3 minutes and yet meet all of the in-service req ...

    SBIR Phase I 1996 Department of DefenseNavy
  4. Submarine Electrical Hull Penetrators/Connectors

    SBC: D. G. O'brien, Inc.            Topic: N/A

    Recent trends in submarine design indicate the need for-locating more electrical components, such as propulsion motors and actuators, outside the pressure hull. As a result, there is a need for electrical hull penetrators/connectors which can transfer high currents or high voltages through the submarine's pressure hull. We propose to review the capabilities and limitations of existing penetrator/ ...

    SBIR Phase I 1996 Department of DefenseNavy
  5. Unmanned Aerial Vehicle Electronic Decoy Payload

    SBC: Dedicated Electronics, Inc.            Topic: N/A

    Enemy forces can be crippled quickly at the beginning of a war by separating the enemies command and control structure from its combat forces and other elements of its defensive network. A false target generator has the potential to saturate or tie up an enemies air defense net and increase survivability of our own airborne assets. An unmanned aerial vehicle (UAV) is an optimum candidate for a dec ...

    SBIR Phase II 1996 Department of DefenseNavy
  6. INNOVATIVE STIRLING CYCLE REFRIGERATOR

    SBC: CREARE LLC            Topic: N/A

    WE PROPOSE USING AN INNOVATIVE STIRLING COOLER FOR SHIPBOARD REFRIGERATION. THIS DESIGN ELIMINATES THE FRICTTON, WEAR, AND SEAL LEAKAGE PROBLEMS OF CURRENT STIRLING COOLERS, AND WILL PROVIDE A HIGH RELIABILITY, LONG-LIFE REFRIGERATOR. THE USE OF NEAR AMBIENT PRESSURE AIR AS THE WORKING FLUID MAKES THIS MACHINE ENVIRONMENTALLY BENIGN AND IMMUNE TO PROBLEMS WITH LEAKAGE IN THE COOLER ENVELOPE. THE R ...

    SBIR Phase II 1992 Department of DefenseNavy
  7. HIGH PERFORMANCE THERMOELECTRIC HEAT SINK

    SBC: CREARE LLC            Topic: N/A

    1An innovative approach for increasing the cooling capacity and efficiency of miniature thermoelectric coolers is proposed. Compared with current thermoelectric coolers, the proposed device will have three major advantages: (1) almost a factor of two increase in maximum cooling capacity, (2) several fold increase in efficiency (when operating at cooling loads comparable to that of present devices) ...

    SBIR Phase I 1992 Department of DefenseNavy
  8. Low Weight Cryocooler For High Temperature Superconductor Antenna Cooling

    SBC: CREARE LLC            Topic: N/A

    Advanced anti-radiation missiles using large, high temperature superconducting antennas will require cryocoolers that can cool the antenna quickly with a minimum mass and volume penalty. We will develop a mixed gas Joule-Thomson (J-T) cryocooler with the load heat exchanger integral to the antenna substrate. The mixed gas J-T thermodynamic cycle is significantly more efficient than current singl ...

    SBIR Phase I 1996 Department of DefenseNavy
  9. Innovative Fabrication of 2D Ultrasonic Imaging Arrays

    SBC: CREARE LLC            Topic: N/A

    Current ultrasound images in mine warfare, biomedical imaging and non-destructive testing are limited by the use of linear transducer arrays which result in thick image "slices", errors from phase aberrations and primitive volumetric scanning capability. Two-dimensional arrays will overcome these limitations. Two-dimensional arrays have not been manufactured because of difficulty in fabricating t ...

    SBIR Phase II 1996 Department of DefenseNavy
  10. IMPACT MECHANISM FOR SEAWATER ROCK DRILL

    SBC: CREARE LLC            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government