List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. "Rolling Deflectometer"

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  2. A NOVEL MASS SPECTROMETER FOR THE DETECTION OF VAPORS FROM EXPLOSIVE, INCENDIARIES AND NOXIOUS GASES

    SBC: Southwest Sciences, Inc.            Topic: N/A

    SOUTHWEST SCIENCIES, INC. PROPOSES A NOVEL MASS SPECTROMETRIC METHOD, * IONIZATION ENERGY MODULATED MASS SPECTROMETRY (IEMMS), FOR THE RAPID DETECTION OF VAPORS FROM EXPLOSIVES, INCENDIARIES AND NOXIOUS GASES. IEMMS COMBINES ELECTRON IMPACT IONIZATION USING A MONOCHROMATIC ELECTRON BEAM WITH ION DETECTION USING TWIN TIME-OF-FLIGHT (TOF) MASS ANALYZERS. ONE ANALYZER QUANTIFIES POSITIVE IONS WHILE T ...

    SBIR Phase I 1992 Department of Transportation
  3. A RELIABLE LOCOMITIVE CAB ALERTER

    SBC: Technology International Incorporated of Virginia            Topic: N/A

    SEVERAL CONCEPTS ARE PROPOSED FOR LOCOMOTIVE CAB ALERTERS THAT CAN BE RETROFITTED TO ALERTER SYSTEMS ALREADY IN SERVICE. THE CONCEPTS INCLUDE A TOUCH SCREEN, WHICH REQUIRES TOUCHING A TARGET TO RESET THE TIMER OR TO RESPOND TO THE ALERTER LIGHT PROMPT. THE INITIAL LOCATION OF THE TARGET ON THE SCREEN IS AUTOMATICALLY SELECTED AT RANDOM. ANOTHER CONCEPT IS THE USE OF A TELEPHONE KEYPAD WITH LCD, WH ...

    SBIR Phase I 1992 Department of Transportation
  4. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  5. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  6. Fast Room Temperature Cure Adhesive for Fiber Optic Connector

    SBC: Advanced Material Systems            Topic: N/A

    Standard U.S. Navy fiber optic assemblies require that the fiber be bonded to the connector using an adhesive that is labor intensive and heat controlled (MIL-A-24792). Advanced Material Systems (AMS) proposes a study that could solve this problem through the development of an adhesive system that would cure at room temperature in less that 3 minutes and yet meet all of the in-service req ...

    SBIR Phase I 1996 Department of DefenseNavy
  7. Methodology to Predict Ballistic Penetration and Damage of Composite Laminated Structures

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Current utilization of composite materials in air and surface weapons systems and structures is extensive, and the use of these materials can be expected to increase in the future. Weapons effectiveness assessments and the design of protective structures require methodologies to predict the terminal ballistic interactions between projectiles and fragments penetrating composite laminated target st ...

    SBIR Phase I 1996 Department of DefenseNavy
  8. Missile Battery Damage Prediction Methodology

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseNavy
  9. RECYCLING SHIPS' PLASTIC WASTE

    SBC: Innovative Research Corp.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseNavy
  10. Automated Aircraft and Cruise Missile Mission and Route Planning Using Parallel Constraint- Satisfaction Techniques

    SBC: Intelligent Logistics            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government