Award Data

The fabrication of submicron piezoelectric ceramics (PZT-5) with properties comparable to commercially available coarse grained materials was demonstrated in the Phase I Small Business Technology Transfer (STTR) program. This work was accomplished in collaboration with the Pennsylvania State University, through a fundamental understanding of the domain state in these materials. Specifically, novel ...

A bar code scanning system that provides in check processing of DoD travel orders. The system will determine seating priority for travelers to alleviate long lines and congestion as travel volume increases in the future. The system can be expandable to include passenger/baggage reconciliation and will have considerable commercial application. This system will be accomplished by using a leading exp ...

Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

Standard U.S. Navy fiber optic assemblies require that the fiber be bonded to the connector using an adhesive that is labor intensive and heat controlled (MIL-A-24792). Advanced Material Systems (AMS) proposes a study that could solve this problem through the development of an adhesive system that would cure at room temperature in less that 3 minutes and yet meet all of the in-service req ...

Current utilization of composite materials in air and surface weapons systems and structures is extensive, and the use of these materials can be expected to increase in the future. Weapons effectiveness assessments and the design of protective structures require methodologies to predict the terminal ballistic interactions between projectiles and fragments penetrating composite laminated target st ...

N/A

N/A

With the advent of widely available PC technology, crash safety information can be cost-effectively disseminated to millions of people in an engaging and educational way. With an enticing and informative PC application, data about damages, costs, injuries and death can be personalized and grasped by anyone, particularily young drivers developing new driving behaviors. ARCCA's proposed system wil ...

N/A