List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. EFFICIENT CONSOLIDATION OF CONCRETE USING THE RESONANCE PHENOMENON AND COMBINATION OF INTERNAL AND SURFACE VIBRATIONS

    SBC: Innotech International, Inc.            Topic: N/A

    A CONCRETE CONSOLIDATION SYSTEM WILL BE DEVELOPED WHICH TAKES ADVANTAGE OF THE RESONANCE PHENOMENON AND HARMONIC COMBINATION OF INTERNAL AND SURFACE VIBRATIONS FOR EFFICIENTACHIEVEMENT OF UNIFORM AND THOROUGH CONSOLIDATION OF CONCRETE PAVEMENTS. AN INTEGRATED ANALYTICAL-EXPERIMENTAL RESEARCH IS PLANNED TO ASSESS THE TECHNICAL FEASIBILITY AND COST COMPETITIVENESS OF THE PROPOSED APPROACH. ANALYTICA ...

    SBIR Phase II 1992 Department of Transportation
  2. DEVELOPMENT OF AN OPTICAL FIBER DYNAMIC SURFACE GEOMETRY MEASUREMENT ARRAY

    SBC: Robert A Denton Inc            Topic: N/A

    DYNAMIC QUANTIFICATION OF THE THREE-DIMENSIONAL SURFACE GEOMETRY OF ANTHROPOMORPHIC TEST DEVICES CAN IMPROVE CURRENT INJURY ASSESSMENT CAPABILITIES. PRESENTLY, A CHEST BAND CONSISTING OF MANY STRAIN GAUGES MOUNTED IN A MEMBRANE ARRAY IS BEING USED TO MEASURE DEFORMATION OF THE TORSO. WHILE THIS TECHNIQUE PROVIDES REASONABLE DATA, IT INCREASES THE COSTOF DATA ACQUISITION AND THE TIME TO PERFORM THE ...

    SBIR Phase I 1992 Department of Transportation
  3. A RELIABLE LOCOMITIVE CAB ALERTER

    SBC: Technology International Incorporated of Virginia            Topic: N/A

    SEVERAL CONCEPTS ARE PROPOSED FOR LOCOMOTIVE CAB ALERTERS THAT CAN BE RETROFITTED TO ALERTER SYSTEMS ALREADY IN SERVICE. THE CONCEPTS INCLUDE A TOUCH SCREEN, WHICH REQUIRES TOUCHING A TARGET TO RESET THE TIMER OR TO RESPOND TO THE ALERTER LIGHT PROMPT. THE INITIAL LOCATION OF THE TARGET ON THE SCREEN IS AUTOMATICALLY SELECTED AT RANDOM. ANOTHER CONCEPT IS THE USE OF A TELEPHONE KEYPAD WITH LCD, WH ...

    SBIR Phase I 1992 Department of Transportation
  4. Fast Room Temperature Cure Adhesive for Fiber Optic Connector

    SBC: Advanced Material Systems            Topic: N/A

    Standard U.S. Navy fiber optic assemblies require that the fiber be bonded to the connector using an adhesive that is labor intensive and heat controlled (MIL-A-24792). Advanced Material Systems (AMS) proposes a study that could solve this problem through the development of an adhesive system that would cure at room temperature in less that 3 minutes and yet meet all of the in-service req ...

    SBIR Phase I 1996 Department of DefenseNavy
  5. LOW COST, LIGHT-WEIGHT NIGHT VISION CAPABILITY FOR HAND LAUNCHED UNMANNED AERIAL VEHICLE SYSTEM

    SBC: Bodkin Design & Engineering, LLC            Topic: N/A

    THE DEVELOPMENT OF A LIGHT WEIGHT INFRARED CAMERA IS PROPOSED, THAT WOULD BE A DROP-IN REPLACELEMENT FOR CURRENT MINIATURE CCD-TV CAMERAS USED ON UNMANNED AERIAL VEHICLES.

    SBIR Phase II 1996 Department of DefenseNavy
  6. Standardizing Control Unit/Robotic Vehicle Controls and Interfaces

    SBC: Cybernet Systems Corporation            Topic: N/A

    The DOD operates logistics, defensive, and assault operations in the most hazardous environment constructed by man, namely the modern battlefield. In the 21st Century, the battlefield environment will become so deadly that any exposure of personnel will have high lethality. Applying battlefield robotics will enhance personnel safety and will Aid force multiplication. However, "man-in-the-loop" con ...

    SBIR Phase I 1992 Department of DefenseNavy
  7. Continuous "Micro-sorting" of Waste Plastics in a Liquid-Fluidized Bed Classifier (LFBC)

    SBC: Covofinish Co., Inc.            Topic: N/A

    The development of a new process for the continuous separation of w aste plastic particles by type into purified streams for sale and recycling is proposed. This approach is based on the segregation of particles by density in liquid-fluidized bed classifiers (LFBC). The primary objective of the proposed work is "proof-of-concept" for the LFBC approach; that is, the experimental demonstratio ...

    SBIR Phase I 1996 Department of DefenseNavy
  8. COMPOSITE MATERIALS GUIDANCE FOR SUBMARINE

    SBC: DEEGAN RESEARCH GROUP, INC.            Topic: N/A

    COMPOSITE MATERIALS OFFER A WIDE RANGE OF ATTRIBUTED THAT CAN IMPROVE THE PERFORMANCE AND REDUCE THE COST OF NEW SUBMARINES. COMPOSITES HAVE NOT YET BEEN USED EXTENSIVELY IN SUBMARINES BECAUSE THERE IS LITTLE EXPERIENCE IN THE SUBMARINE ENGINEERING COMMUNITY ON WHICH TO BASE COMPONENT DESIGN. COMPOSITES, UNLIKE METALS, HAVE A VERY LIMITED BODY OF DESIGN GUIDANCE SPECIFICALLY ORIENTED TO SUBMARINE ...

    SBIR Phase II 1992 Department of DefenseNavy
  9. Format D Battery Module

    SBC: DEEGAN RESEARCH GROUP, INC.            Topic: N/A

    1Reliable and continuous power to submarine electronics is essential for mission execution and for the safe operation of the ship. Digital electronics cannot continue operation through even very short power outages cause by bus transfer devices that have historically been sufficient for analog combat systems. The restart and reload that a digital system must execute after a short power interruptio ...

    SBIR Phase I 1992 Department of DefenseNavy
  10. AUM/UUV-a Virtual Environment for Undersea Telepresence

    SBC: IA, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government