Award Data

In this document, a proposed modular detector system, intended for used as part of an existing high energy computed tomography system is described. Each detector module would be comprised of a cadmium tungstate linear detector array (LDA) and a Varian PaxScan 1515DXT Digital Image Receptor. The proposed design would couple the bottom face of the LDA to the 1515DXT, which would allow the 1515DXT to ...

Phelps2020 proposes a multi-sensor system (SAFE) that passively increases operational distances in the maritime environment in the presence of dense fog. The system comprises multiple modalities (EO, SWIR, LWIR) operating in various modes (temporal, multi-spectral, and polarized), and orchestrated via an optimized set of algorithms within a decision making fusion framework. Our solution involves t ...

The Phase I objective is a proof of concept capability integrating process information, material properties and damage tolerance simulations into the Additive Manufacturing (AM) design certification process. VEXTEC has a toolbox of software and methods that consists of various software modules in multiple formats that are used to assess the durability of parts processed by traditional methods of c ...

The introduction of USN electric ship initiatives and advanced weapons systems such as rail guns, lasers, and other future pulse loads to future warships creates power and energy demands that exceed what a traditional ship electric plant interfaces have been designed to provide. This creates the problem of satisfying a growing demand for stored energy, while working within the limited space availa ...

Technology Associates, Inc. (TAI) proposal is for development of a TAI modular boat ramp concept (TAI-MBR) for Launch and Recovery (L&R) of watercraft from the Joint High Speed Vessel's (JHSV) stern. The TAI-MBR will rapidly L&R various manned and unmanned watercraft in less than 15 minutes and in sea state 3 (SS3) with wave heights of 3 to 5 ft. It will not rely on the use of the cargo crane for ...

In this Phase I SBIR, Accurate Automation Corporation will prototype key component technologies for a neural network-based Logistic Support Assistant that will assist Navy Supply Management personnel in planning and forecasting of logistics efforts. Fully developed as part of a Phase II effort, this system will help ensure smooth continuity of performance even when personnel are reassigned. ...

In this project we will adapt our programmable neural network processor (NNP) into a Fuzzy/neural network processor (FNNP). Already having the commercially successful NNP, we begin this program with more than half the work completed. we will define and evaluate NNP architectural modifications to optimize both data flow and data processing for both fuzzy logic and neural network- Operations- we w ...

N/A

Incorporation of cleavage microcracks on otherwise crack free material is a new approach used in the fabrication of some microelectonics devices. This proposal describes the development of a new computer controlled microindenter system for the farication of microcracks on a crystalline substrate. System capabilities will include the introduction of two simultaneous Vickers indentations at precise ...

Standard U.S. Navy fiber optic assemblies require that the fiber be bonded to the connector using an adhesive that is labor intensive and heat controlled (MIL-A-24792). Advanced Material Systems (AMS) proposes a study that could solve this problem through the development of an adhesive system that would cure at room temperature in less that 3 minutes and yet meet all of the in-service req ...