List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. GPS-BASED AUTONOMOUS SPACE NAVIGATION

    SBC: Arrowsmith Technologies Inc            Topic: N/A

    COMMERCIAL AND GOVERNMENT SPACE TRANSPORTATION SYSTEMS DEPEND ON GROUND SUPPORT FOR NAVIGATION. THE GROUND SOLUTION CAN BE COSTLY AND MAY PROVIDE LESS ACCURACY THAN NEEDED. A GPS-BASED REAL-TIME AUTONOMOUS SPACECRAFT NAVIGATION SYSTEM IS PROPOSED. AN ALGORITHM WILL BE DEVELOPED WHICH COMBINES GPS-DERIVED POINT POSITION ESTIMATES WITH A PROPAGATED A PRIORI POSITION ESTIMATE. THE POINT POSITIONS ARE ...

    SBIR Phase I 1992 Department of Transportation
  2. STRUCTURES

    SBC: Invocon Consultants            Topic: N/A

    A NEED EXISTS TO MONITOR VIBRATION IN HIGHWAY BRIDGES. IT IS DESIRABLE TO MONITOR MANY POINTS ON THE BRIDGE. THE CURRENT PROBLEM IS THAT SENSORS MUST BE WIRED TO A CENTRAL LOCATION. WIRE IS DIFFICULT TO INSTALL AND TO MOVE. THE SOLUTION IS TO COLLECT SENSOR DATA BY RADIO. A SYSTEM EXISTS THAT ELIMINATES WIRE. IT GATHERS SENSOR DATA TO A CENTRAL LOCATION BY RADIO. THE SYSTEM'S UNIQUE FEATURE IS THA ...

    SBIR Phase II 1992 Department of Transportation
  3. Field Energy Recoil Emission Technology (FERET)

    SBC: INVOCON, INC.            Topic: N/A

    Passenger safety concerns have prompted the FAA to elicit energy-sensitive neutron detectors which do not rely on the time-of-flight method and are suitable for use in explosive detection systems. Invocon, Inc. proposes to design an inspection system consisting of an energy source and a detector. Designated FERET sytem, (Field Energy Recoid Emission Technology), it would detect substances identi ...

    SBIR Phase I 1996 Department of Transportation
  4. INNOVATIVE FIRE RESISTANT ("FIREPROOFING") COATINGS FOR USE ON COMPOSITE PRODUCTS ABOARD U.S. COMMERCIAL SHIPS

    SBC: Omega Point Laboratorytorie            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of Transportation
  5. An Inexpensive Structural Core Material for Composite Bridges

    SBC: Polymer Bridge Systems, Inc.            Topic: N/A

    Polymer Bridge Systems, with over 8 years of research composite bridges, found that success hinges on being dollar-for-dollar cost competitive with steel and concrete. We founded the four "golden rules" that are required: the bridge must be: 1) factory build; 2) road transportable; 3) installed in 1 eight-hour day; and 4) be cost-competitive on an installed cost basis. This bridge will be buil ...

    SBIR Phase I 1996 Department of Transportation
  6. NONDESTRUCTIVE TESTING OF DRILLED SHAFTS USING PATTERN RECOGNITION

    SBC: Stress Eng Services, Inc            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of Transportation
  7. Special Architecture to Break Speed Barriers in Real-Time Applications for Automatic Target Recognition

    SBC: 3D-Computing, Inc.            Topic: N/A

    The 3D-Flow Processor system is a new concept in very fast, real-time system architectures. The throughput of this system can reach up to 100 millin frames/sec, yet unlike currently available systems of comparable speed, it is fully programmable and extremely flexible. Algorithms for processing information from the input of multiple sensor can easily be implemented on a 3D-Flow system to achiev ...

    SBIR Phase I 1996 Department of DefenseArmy
  8. THERMOPLASTIC ELASTOMER (TPE) CHEMICAL PROTECTIVE (CP) GLOVES BY INJECTION MOLDING PROCESS

    SBC: Eskay Assoc.            Topic: N/A

    THERMOPLASTIC ELASTOMER (TPE) BY INJECTION MODLING OFFERS AN ALTERNATE METHOD FOR FORMING CHEMICAL PROTECTIVE GLOVES A SOCMPARED TO THE CONVENTONAL DIP PROCESS USING BUYTL RUBBER SOLUTIONS. THE ADVENT OF VARIOUS TPES WITH OLEFINIC, STYRENIC, URETHANE, ENGINEERING RESINS AND ALLOYS AND BLENDS OFFER THE ADVANTAGE OF INJECTION MODLING PRODUCTS WHICH HAVE BEEN CONVENTIONALLY MADE BY ELASTOMER COMPOUND ...

    SBIR Phase I 1992 Department of DefenseArmy
  9. Processing of Selectively-Discontinuous-Fiber (SDF) Composite Materials

    SBC: Advanced Composite Operations            Topic: N/A

    This proposal is directed at creating discontinuous unidirectional composite from continuous unidirectional prepreg. The process, Selectively-Discontinuous-Fiber (SDF), introduces micro-cuts in preimpregnated unidirectional materials at specified locations. This process will allow unidirectional composite prepreg to be used for the fabrication of complex-compound components that have be ...

    SBIR Phase I 1996 Department of DefenseAir Force
  10. Augmenting Fire Fighter Training With Virtual Reality Technology

    SBC: 5, Inc. (full Immersion            Topic: N/A

    Current fire fighting training methods are possibly lacking maximum effectiveness due to increasing safety and environmental regulation. Additionally, performance measurement in large classes becomes difficult unless trainees have identical training scenarios and evaluations. This proposal details the analysis of current training methods and subsequent emulation of them using virtual reality (VR ...

    SBIR Phase II 1996 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government