You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. The Application of LIBS to the Detection of Lead in Soil and Paint

    SBC: ADA Technologies, Inc.            Topic: N/A

    This proposal describes the development of an instrument based on laser-induced breakdown spectroscopy (LIBS) for the detection of lead in paint and soil that will have both military and commercial applications. The Phase I instrument will be similar to multi-species, portable LIBS instruments built by Dr. David Cremers at Los Alamos National Laboratory that utilize a spectrograph/charge coupled ...

    SBIR Phase I 1996 Department of DefenseArmy
  2. Special Architecture to Break Speed Barriers in Real-Time Applications for Automatic Target Recognition

    SBC: 3D-Computing, Inc.            Topic: N/A

    The 3D-Flow Processor system is a new concept in very fast, real-time system architectures. The throughput of this system can reach up to 100 millin frames/sec, yet unlike currently available systems of comparable speed, it is fully programmable and extremely flexible. Algorithms for processing information from the input of multiple sensor can easily be implemented on a 3D-Flow system to achiev ...

    SBIR Phase I 1996 Department of DefenseArmy
  3. THERMOPLASTIC ELASTOMER (TPE) CHEMICAL PROTECTIVE (CP) GLOVES BY INJECTION MOLDING PROCESS

    SBC: Eskay Assoc.            Topic: N/A

    THERMOPLASTIC ELASTOMER (TPE) BY INJECTION MODLING OFFERS AN ALTERNATE METHOD FOR FORMING CHEMICAL PROTECTIVE GLOVES A SOCMPARED TO THE CONVENTONAL DIP PROCESS USING BUYTL RUBBER SOLUTIONS. THE ADVENT OF VARIOUS TPES WITH OLEFINIC, STYRENIC, URETHANE, ENGINEERING RESINS AND ALLOYS AND BLENDS OFFER THE ADVANTAGE OF INJECTION MODLING PRODUCTS WHICH HAVE BEEN CONVENTIONALLY MADE BY ELASTOMER COMPOUND ...

    SBIR Phase I 1992 Department of DefenseArmy
  4. Submersible Ice Spectroradiometer

    SBC: Analytical Spectral Devices,            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseArmy
  5. GPS-BASED AUTONOMOUS SPACE NAVIGATION

    SBC: Arrowsmith Technologies Inc            Topic: N/A

    COMMERCIAL AND GOVERNMENT SPACE TRANSPORTATION SYSTEMS DEPEND ON GROUND SUPPORT FOR NAVIGATION. THE GROUND SOLUTION CAN BE COSTLY AND MAY PROVIDE LESS ACCURACY THAN NEEDED. A GPS-BASED REAL-TIME AUTONOMOUS SPACECRAFT NAVIGATION SYSTEM IS PROPOSED. AN ALGORITHM WILL BE DEVELOPED WHICH COMBINES GPS-DERIVED POINT POSITION ESTIMATES WITH A PROPAGATED A PRIORI POSITION ESTIMATE. THE POINT POSITIONS ARE ...

    SBIR Phase I 1992 Department of Transportation
  6. Embedded Optical Fiber Sensors in Solid Rocket Motor Cases

    SBC: Astro Technology Inc.            Topic: N/A

    This research project will investigate the use of optical-fiber sensors within a solid rocket motor case. THese sensors will be multi-functional and possess the ability to measure displacement (or strain) and temperature. They will be capable of embedment "in-site" or can be bonded to the exterior of motors that have already been manufactured. If successful, the effect of forces exerted on the ...

    SBIR Phase I 1996 Department of DefenseArmy
  7. Artificial Intelligence and Visual Techniques for Course of Action (COA) Development and Analysis

    SBC: AUSTIN INFO SYSTEMS, INC.            Topic: N/A

    The objective of this project is to establish the technical foundation for, and the feasibility of, a tactical decision aid that can be used by a commander and staff to develop and analyze courses of action (COA). This project will combine object-oriented and distributed computing technologies into an integrated system architecture and design. Successful techniques from artificial intelligence r ...

    SBIR Phase I 1996 Department of DefenseArmy
  8. Physical Process Modeling & Simulation for Distributive Interactive

    SBC: BAKER ENGINEERING AND RISK CONSULTANTS, INC.            Topic: N/A

    We propose to develop software algorithms which can be integrated in a Distributive Interactive Simulation (DIS) environment and which model the following wartime effects. Explosion fireball and smoke Building structure failures Debris throws and roll Drift of chemical agents and smoke The Phase I development of these algorithms will be accomplished utilizing esta ...

    SBIR Phase I 1996 Department of DefenseArmy
  9. COHERENT LIDAR SYSTEM FOR HIGH RESOLUTION MEASUREMENT OF ATMOSPHERIC WIND VELOCITY AND WATER VAPOR FIELDS

    SBC: COHERENT TECHNOLOGIES, INC.            Topic: N/A

    THIS EFFORT IS TO DETERMINE THE DESIGN OF A DIODE-PUMPED SOLID-STATE 2 UM COHERENT LASER RADAR FOR THE HIGH SPATIAL AND TEMPORAL RESOLUTION MEASUREMENT OF WIND VELOCITY AND WATER VAPOR CONCENTRATIONS IN THE ATMOSPHERIC BOUNDARY LAYER. A DETAILED COMPUTER SIMULATION OF THE COHERENT LASER RADAR WIND AND DIAL MEASUREMENT PROCESS WILL BE USED TO DETERMINE SYSTEM DESIGN PARAMETERS. A PERFORMANCE TRADE ...

    SBIR Phase I 1992 Department of DefenseArmy
  10. Autonomous Lidar Wind Field Sensor

    SBC: COHERENT TECHNOLOGIES, INC.            Topic: N/A

    Previous measurements using two micron solid-state lidar systems and computer simulation of lidar performance demonstrate that an eyesafe, low-pulse-energy (1 - 10 mJ/pulse), small aperture (~10cm) lidar will be capable of highly accurate high spatial resolution wind velocity measurements to ranges of 2-10 km in the atmospheric boundary layer. High-spatial resolution 3-D coverage for several km a ...

    SBIR Phase II 1996 Department of DefenseArmy
US Flag An Official Website of the United States Government