You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Special Architecture to Break Speed Barriers in Real-Time Applications for Automatic Target Recognition
SBC: 3D-Computing, Inc. Topic: N/AThe 3D-Flow Processor system is a new concept in very fast, real-time system architectures. The throughput of this system can reach up to 100 millin frames/sec, yet unlike currently available systems of comparable speed, it is fully programmable and extremely flexible. Algorithms for processing information from the input of multiple sensor can easily be implemented on a 3D-Flow system to achiev ...
SBIR Phase I 1996 Department of DefenseArmy -
THERMOPLASTIC ELASTOMER (TPE) CHEMICAL PROTECTIVE (CP) GLOVES BY INJECTION MOLDING PROCESS
SBC: Eskay Assoc. Topic: N/ATHERMOPLASTIC ELASTOMER (TPE) BY INJECTION MODLING OFFERS AN ALTERNATE METHOD FOR FORMING CHEMICAL PROTECTIVE GLOVES A SOCMPARED TO THE CONVENTONAL DIP PROCESS USING BUYTL RUBBER SOLUTIONS. THE ADVENT OF VARIOUS TPES WITH OLEFINIC, STYRENIC, URETHANE, ENGINEERING RESINS AND ALLOYS AND BLENDS OFFER THE ADVANTAGE OF INJECTION MODLING PRODUCTS WHICH HAVE BEEN CONVENTIONALLY MADE BY ELASTOMER COMPOUND ...
SBIR Phase I 1992 Department of DefenseArmy -
Processing of Selectively-Discontinuous-Fiber (SDF) Composite Materials
SBC: Advanced Composite Operations Topic: N/AThis proposal is directed at creating discontinuous unidirectional composite from continuous unidirectional prepreg. The process, Selectively-Discontinuous-Fiber (SDF), introduces micro-cuts in preimpregnated unidirectional materials at specified locations. This process will allow unidirectional composite prepreg to be used for the fabrication of complex-compound components that have be ...
SBIR Phase I 1996 Department of DefenseAir Force -
Augmenting Fire Fighter Training With Virtual Reality Technology
SBC: 5, Inc. (full Immersion Topic: N/ACurrent fire fighting training methods are possibly lacking maximum effectiveness due to increasing safety and environmental regulation. Additionally, performance measurement in large classes becomes difficult unless trainees have identical training scenarios and evaluations. This proposal details the analysis of current training methods and subsequent emulation of them using virtual reality (VR ...
SBIR Phase II 1996 Department of DefenseAir Force -
Ground-Penetrating Radar for Minefield Detection and Mapping
SBC: Aes International Corp Topic: N/AThe AES International Corporation (AESI) of College Station, Texas, in concert with Texas A&M University personnel, can build an airborne ground-penetrating radar system to detect land mines from an Unmanned Airborne Vehicle (UAV). The radar itself will be a totally new and fully airworthy flight demonstration unit, the principles and characteristics of which will be conceptually similar to two p ...
SBIR Phase I 1996 Department of DefenseNavy -
NOISE SUPPRESSOR DEVELOPMENT- QUITE VALVES FOR AIR PRESSURE REDUCTION MANIFOLDS
SBC: American Energy Valve Co Topic: N/ATHIS PROPOSAL WILL DEMONSTRATE (IN 2" TO 4" SIZE), A NOISE REUCING TRIM THAT CAN BE UTILIZED IN ROTARY CONTROL/ON-OFF BALL VALVES. THIS VALVE TRIM ADDRESSES NOISE AT THE SOURCE. THE BASIC DESIGN HAS A VARIABLE IMPEDENCE TRIM TO CAUSE A HIGH IMPEDENCE AT LOW ANGLES OF OPENING AND LOW IMPEDENCE (VERY LITTLE FLOW RESTRICTION) AT LARGE OPENING ANGLES. IT IS AN IDEAL VALVE FOR PRESSURIZATION/DE-PRESSUR ...
SBIR Phase I 1987 Department of DefenseNavy -
Fiber Optic Coupled Infrared Focal Plane Array (FOCIRFPA)
SBC: Anawah, Inc. Topic: N/AAMI utilizes a technique known as the "ribbon wind" approach to manufacture infrared fiber image bundles. The ribbon wind approach provides a unique opportunity to manufacture relatively low cost, large format, medium resolution infrared fiberoptic image bundles for industrial, commercial and military applications. Indeed, this approach has been applied successfully by numerous fiberoptic manufa ...
SBIR Phase II 1996 Department of DefenseNavy -
NOISE SUPPRESSOR DEVELOPMENT-QUIET VALVES FOR AIR PRESSURE REDUCTION MANIFOLDS
SBC: Annapolis Research & Dev Topic: N/AN/A
SBIR Phase I 1987 Department of DefenseNavy -
TIME RESOLVED TARGET AND PLUME OPTICAL PROPERTIES MEASUREMENTS DURING RP LASER INTERACTIONS
SBC: Antropix Corpon Topic: N/AN/A
SBIR Phase I 1987 Department of DefenseAir Force -
GPS-BASED AUTONOMOUS SPACE NAVIGATION
SBC: Arrowsmith Technologies Inc Topic: N/ACOMMERCIAL AND GOVERNMENT SPACE TRANSPORTATION SYSTEMS DEPEND ON GROUND SUPPORT FOR NAVIGATION. THE GROUND SOLUTION CAN BE COSTLY AND MAY PROVIDE LESS ACCURACY THAN NEEDED. A GPS-BASED REAL-TIME AUTONOMOUS SPACECRAFT NAVIGATION SYSTEM IS PROPOSED. AN ALGORITHM WILL BE DEVELOPED WHICH COMBINES GPS-DERIVED POINT POSITION ESTIMATES WITH A PROPAGATED A PRIORI POSITION ESTIMATE. THE POINT POSITIONS ARE ...
SBIR Phase I 1992 Department of Transportation