Award Data

COMMERCIAL AND GOVERNMENT SPACE TRANSPORTATION SYSTEMS DEPEND ON GROUND SUPPORT FOR NAVIGATION. THE GROUND SOLUTION CAN BE COSTLY AND MAY PROVIDE LESS ACCURACY THAN NEEDED. A GPS-BASED REAL-TIME AUTONOMOUS SPACECRAFT NAVIGATION SYSTEM IS PROPOSED. AN ALGORITHM WILL BE DEVELOPED WHICH COMBINES GPS-DERIVED POINT POSITION ESTIMATES WITH A PROPAGATED A PRIORI POSITION ESTIMATE. THE POINT POSITIONS ARE ...

N/A

An optical, non-contact roof deformation monitoring system will be designed based on an existing multi-point, non-contact, multi-axis optical sensor-based measurement system that is currently used to measure chest deflection in crash-test dummies. The research involves determining suitable components to be used in the optical path, from high-power LED arrays through lenses and optical sensors. T ...

FOSTER-MILLER PROPOSES TO DEVELOP A NOVEL INFARED FIBER OPTIC SENSOR TO NON-DESTRUCTIVELY DETECT CORROSIVE ATTACK AND DISBONDING A BOTH METAL-TO-METAL AND COMPOSITE TO METAL JOINTS AND FASTENERS IN AIRCRAFT STRUCTURES. THIS NEW INFRARED NDI SYSTEM WILL BE A POWERFUL ANALYTICAL TOOL TO DETECT THE ONSET OF DISBONDING AND INTRUSION OF CORROSIVE ELEMENTS INTO THE JOINT LONG BEFORE IT BECOMES VISIBLE B ...

This proposal describes an innovative approach to non-chemical deicing of aircraft which focuses on new technology which could provide revolutionary improvement in the performance of a relatively mature deicing technique. This combined systems approach could be readily incorporated into existing aircraft and ground support equipment. We propose to develop a permanent anti-icing surface treatment ...

N/A

A NEED EXISTS TO MONITOR VIBRATION IN HIGHWAY BRIDGES. IT IS DESIRABLE TO MONITOR MANY POINTS ON THE BRIDGE. THE CURRENT PROBLEM IS THAT SENSORS MUST BE WIRED TO A CENTRAL LOCATION. WIRE IS DIFFICULT TO INSTALL AND TO MOVE. THE SOLUTION IS TO COLLECT SENSOR DATA BY RADIO. A SYSTEM EXISTS THAT ELIMINATES WIRE. IT GATHERS SENSOR DATA TO A CENTRAL LOCATION BY RADIO. THE SYSTEM'S UNIQUE FEATURE IS THA ...

Passenger safety concerns have prompted the FAA to elicit energy-sensitive neutron detectors which do not rely on the time-of-flight method and are suitable for use in explosive detection systems. Invocon, Inc. proposes to design an inspection system consisting of an energy source and a detector. Designated FERET sytem, (Field Energy Recoid Emission Technology), it would detect substances identi ...

This proposal will investigate the potential of an enhanced version of the Meandering Winding Magnetometer (MWM), called the MWM-Array, to characterize and predict remaining life for components experiencing widespread fatigue damage. The MWM has already demonstrated the potential to characterize fatigue damage in metals priod to the formation of cracks, as well as the ability to detect and charac ...

KaZaK Composites, Kaman Sciences and Dr. Malcolm Ray of the University of Iowa propose to investigate the design of energy absorbing utility poles made from composite materials. This team has considerable experience in the multiple technologies needed to successfully complete the proposed program, including design of high performance composite products for automated production and design, analysi ...