You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Aerospace Ceramics and Bone

    SBC: BIOMEDICAL ENTERPRISES INC            Topic: N/A

    BioMedical Enterprises, Inc. (BME) and NASA Ames Research Center (NASA ARC) are developing NASA's aerospace insulation materials for use as an osseous scaffolding to facilitate and support bone wound healing and regeneration. Fibrous reusable composite insulation (FRCI) developed by NASA for use on the space shuttle was modified to promote bone ingrowth and will be evaluated for its ability to fo ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  2. A Low-Cost Miniature Active Radar Frequency Package (AFRP)

    SBC: Carrell Associates, Inc.            Topic: N/A

    This SBIR Phase I program will test the feasibility of achieving a high effective radar cross section over extremely wide bandwidth in a small, low-cost, RF repeater module, using a retrodirective array of a very small repeaters. The array factors effectively multiply the RF characteristics of a single channel to realize high array gain and power using low-performance amplifier. An integral goal ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  3. INTEGRATION OF EXPERT SYSTEM FOR PROCESS PLANNING AND FEATURE BASED DESIGNS

    SBC: Cim Systems, Inc.            Topic: N/A

    ARTIFICIAL INTELLIGENCE/EXPERT SYSTEM TECHNIQUES HAVE DEMONSTRATED THE ABILITY TO ADDRESS COMPLEX REASONING TASKS REQUIRED FOR PROCESS PLANNING. FEATURE-BASED DESIGN THEORY AND PRELIMINARY EFFORTS HAVE SHOWN THE POTENTIAL OF PROVIDING A FUNDAMENTAL MODEL FOR CAPTURE AND MANIPULATION OF DESIGN KNOWLEDGE. HOWEVER, THE TWO TECHNOLOGIES HAVE NOT BEEN SUFFICIENTLY INTEGRATED TO ALLOW DESIGN FEATURES TO ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  4. VIRTUAL FACTORIES AS A MECHANISM FOR CONTINUOUS BUSINESS RE-ENGINEERING

    SBC: KNOWLEDGE BASED SYSTEMS INC            Topic: N/A

    THE PRIMARY GOAL OF THIS PROJECT IS TO DEVELOP AND DEMONSTRATE A SIMULATION/FACTORY CONTROL CAPABILITY TO (1) SIMULATE PRODUCTS, PROCESSES, AND FACTORY CONFIGURATIONS AT MULTIPLE LEVELS OF ABSTRACTION, (2) PROVIDE FINE GRAINED ANALYSIS OF PRODUCT AND PROCESS DESIGNS, AND (3) PROVIDE A MODEL DRIVEN FACTORY CONTROL ARCHITECTURE SO THAT THE MODELS EXECUTED IN THE SIMULATION STUDIES CAN BE DIRECTLY US ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  5. Model Neutral Data Representation Using the Theory of Corobs

    SBC: LAWRENCE TECHNOLOGIES, LLC            Topic: N/A

    We propose to demonstrate a powerful, general approach, the Theory of Corobs, to address DARPA's identified need for canonical data structure and access mechanisms to support model interoperability. The technology we will produce under this contract will enable the construction of robust data warehousing supporting a wide range of "looks" of the data to the outside world, true generic knowledge b ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  6. Virtual Environmental Training for Battlefield Medical Personnel

    SBC: LINCOM CORP.            Topic: N/A

    The Virtual Environment Training for Battlefield Medical Personnel (VETBMP) project is the development of a simulation architecture designed to integrate procedural simulations, intelligent tutoring, and various sensory input devices to create a realistic training scenario for 'forward' military personnel. Phase I of VETBMP will be a simulation of a standard medic task (intravenous infusion), emb ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  7. APPLICATIONS OF FULLERENES: CATALYST SUPPORTS FOR AQUEOUS FUEL CELLS

    SBC: LYNNTECH INC.            Topic: N/A

    FUEL CELLS OPERATING IN AQUEOUS ELETROLYTES (BELOW 200¿C, DEPENDING ON THE CHOSEN ELECTROLYTE TECHNOLOGY) NORMALLY OPERATE ON HYDROGEN FUEL AND OXYGEN (OR AIR) AS THE OXIDANT. HIGH-PERFORMANCE FUEL CELL ELECTRODES REQUIRE HIGH CATALYST SURFACE AREAS, GOOD ELECTRONIC CONDUCTIVITIES AND BROAD REACTION ZONES, DEFINED BY THE CONTACT AREA BETWEEN THE CATALYST, THE GAS PHASE REACTANT AND THE ELECTROLYT ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  8. Electrochemical Recovery of Heavy Metals from Ground Water at Military Sites

    SBC: LYNNTECH INC.            Topic: N/A

    The Department of Defense has undertaken an ambitious environmental restoration program at thousands of facilities in the U.S. Many of these facilities have been contaminated by the discharge of dissolved heavy metals. Often these contaminants migrate into the ground water where they pose a serious threat to aquatic systems and to human health. The remediation of soils and ground water is usual ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  9. Low Cost Manufacture of Micro-Optical Components & Systems Using Ink-Jet Technology

    SBC: MicroFab Technologies Inc            Topic: N/A

    We will develop a new low cost, data driven, manufacturing technique for constructing micro-optical elements and optical integrated circuits. Specifically, we will apply ink-jet printing technology to form and place microscopic droplets of passive and active optical materials, such as uv-cured resins and sol-gel glasses, in order to construct micro-optical elements and structures of high scientifi ...

    SBIR Phase II 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. Hierarchical Design Methodologies for High Availability Systems

    SBC: Reliable Computer Technology            Topic: N/A

    To meet dependability requirements dictated by current trends in both defense and commercial technologies, massive modular redundancy and application specific designs will have to give way to more efficient, scalable and cost-effective approaches. This Phase I proposal introduces a method which takes a basic architectural approach to fault-tolerant system design. The proposed research will addre ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government