You are here

Home » Reports

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 463 results
 
  • Record 1 TO 463

  1. Electronic Pasteurization of Meat Patties

    SBC: Accelerator Technology Corporation            Topic: N/A

    Accelerator Technology Corp. proposes to develop a compact, cost-effective elctron-beam disinfestation system for pasteurization of meat patties. The system is designed to be integrated into the production line of a conventional meat patty operation. In such operations, the patties are stamped from sheets of ground meat in rows of 4-5 patties, moving on a conveyor at the rate of ~1 row/second. ...

    SBIR Phase I 1996 Department of Agriculture

  2. VLST FLUID SYSTEM FOR DEPOSITION OF DNA PROBE ARRAYS

    SBC: Accelerator Technology Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Health and Human Services

  3. Fabrication of Armor Composite Materials

    SBC: Adaptive Cognitive Systems            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseArmy

  4. Special Architecture to Break Speed Barriers in Real-Time Applications for Automatic Target Recognition

    SBC: 3D-Computing, Inc.            Topic: N/A

    The 3D-Flow Processor system is a new concept in very fast, real-time system architectures. The throughput of this system can reach up to 100 millin frames/sec, yet unlike currently available systems of comparable speed, it is fully programmable and extremely flexible. Algorithms for processing information from the input of multiple sensor can easily be implemented on a 3D-Flow system to achiev ...

    SBIR Phase I 1996 Department of DefenseArmy

  5. A Three Dimensional Flow Parallel-Processing System for Fast Programmable Real-Time Applications

    SBC: 3D-Computing, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Energy

  6. THERMOPLASTIC ELASTOMER (TPE) CHEMICAL PROTECTIVE (CP) GLOVES BY INJECTION MOLDING PROCESS

    SBC: Eskay Assoc.            Topic: N/A

    THERMOPLASTIC ELASTOMER (TPE) BY INJECTION MODLING OFFERS AN ALTERNATE METHOD FOR FORMING CHEMICAL PROTECTIVE GLOVES A SOCMPARED TO THE CONVENTONAL DIP PROCESS USING BUYTL RUBBER SOLUTIONS. THE ADVENT OF VARIOUS TPES WITH OLEFINIC, STYRENIC, URETHANE, ENGINEERING RESINS AND ALLOYS AND BLENDS OFFER THE ADVANTAGE OF INJECTION MODLING PRODUCTS WHICH HAVE BEEN CONVENTIONALLY MADE BY ELASTOMER COMPOUND ...

    SBIR Phase I 1992 Department of DefenseArmy

  7. Processing of Selectively-Discontinuous-Fiber (SDF) Composite Materials

    SBC: Advanced Composite Operations            Topic: N/A

    This proposal is directed at creating discontinuous unidirectional composite from continuous unidirectional prepreg. The process, Selectively-Discontinuous-Fiber (SDF), introduces micro-cuts in preimpregnated unidirectional materials at specified locations. This process will allow unidirectional composite prepreg to be used for the fabrication of complex-compound components that have be ...

    SBIR Phase I 1996 Department of DefenseAir Force

  8. Augmenting Fire Fighter Training With Virtual Reality Technology

    SBC: 5, Inc. (full Immersion            Topic: N/A

    Current fire fighting training methods are possibly lacking maximum effectiveness due to increasing safety and environmental regulation. Additionally, performance measurement in large classes becomes difficult unless trainees have identical training scenarios and evaluations. This proposal details the analysis of current training methods and subsequent emulation of them using virtual reality (VR ...

    SBIR Phase II 1996 Department of DefenseAir Force

  9. ELECTRO-MECHANICAL (EM) ACTUATOR DRIVER

    SBC: Advanced Motion Controls Inc.            Topic: N/A

    THE PROJECT WILL DEVELOP A NOVEL MINIATURE PULSE WIDTH MODULATED POWER DRIVER FOR ACTUATORS, I.E. DC MOTOR. THE POWER DRIVER WILL DELIVER 50 AT 50VDO IN A DOUBLE INON PACKAGE. THIS COMPACT DESIGN CAN ONLY BE ACHIEVED THROUGH THE INNOVATIVE COMBINATION OF MODER POWER SEMICONDUCTOR TECHNOLOGIES, PROPRIETORY CIRCUIT DESIGN, AND STATE-OF-THE-ART PACKAGING TECHNOLOGY WHICH UTILIZES NEW HEAT CONDUCTIVE ...

    SBIR Phase II 1992 Department of DefenseArmy

  10. INTEGRAL STARTER/GENERATOR FOR SMALL TURBO JET ENGINES

    SBC: Advanced Motion Controls Inc.            Topic: N/A

    THE PROPOSED EFFORT WILL DEVELOP AN INTEGRAL STARTER/GENERATOR FOR SMALL TURBO JET ENGINES. THE STARTER CAN BE POWERED BY A 28 VDC BATTERY. THE LENGTH OF THE STARTER WILL BE 2.5 - 3" AND THE 0.D. WILL BE 2.5". THE STARTER WILL BE ABLE TO GENERATE 190 OZ-IN OF PEAK TORQUE TO ACCELERATE THE TURBINE TO 50 KRPM. AFTER THE ENGINE RUNS ABOVE SUSTAINING SPEED THE ELECTRONIC CONTROL WILL SWITCH FROM THE S ...

    SBIR Phase I 1991 Department of DefenseArmy
US Flag An Official Website of the United States Government