List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. 3D Modeling Indoor Space

    SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED            Topic: SOCOM173002

    SOCOM seeks an innovative, computationally efficient, and automated process that uses high-resolution, still-frame images and/or Full Motion Video, collected from handheld devices, to generate 3D models of building interiors.The ability to use handheld inputs for 3D modeling, at its fundamental level, is a core interest for computer vision and photogrammetric engineering. Hence, the solution will ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  2. Advanced Durability Coatings for Unmanned Aerial Vehicle Propulsion

    SBC: UNITED PROTECTIVE TECHNOLOGIES, LLC            Topic: SOCOM163002

    Unmanned Aerial Vehicle (UAV) engine propulsion reliability is often dominated by failures associated with load bearing, sliding, or rotating components. These durability issues result in frequent overhauls, reducing system availability and increasing operating cost. Overcoming these is dramatically more difficult due to the operating conditions for military applications as well as the major empha ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  3. Family of Light Weight Cases for 5.56mm Ammunition

    SBC: CORVID TECHNOLOGIES, LLC            Topic: SOCOM17001

    During the Phase I effort, Corvid Technologies will thoroughly evaluate the present state of the art of candidate materials and designs of a lighter and more cost effective 5.56mm ammunition case for the expressed purpose of compiling data in a clear, easily digested format that will be subsequently used to select a candidate or candidates for prototyping. The present state of the art consists of ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  4. Canine Response Inhibitors

    SBC: K2 Solutions, Inc            Topic: SOCOM172001

    U.S. Special Operations Command (USSOCOM) missions require the ability to maneuver undetected in urban and rural environments. While Special Operations Forces (SOF) have developed Tactics, Techniques, and Procedures (TTPs) for avoiding adversarial humans and technologies, remotely deliverable deterrents for domesticated and feral canines have remained an elusive goal, sometimes compromising operat ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  5. Advanced Opaque Armor Materials and Manufacturing Methods

    SBC: CORVID TECHNOLOGIES, LLC            Topic: SOCOM14003

    Corvid Technologies is proposing an inconspicuous armor solution for SOCOM NSCVs that will offer less costly installation than the current steel shell. This effort will benefit from Corvid"s experience in rapid development of specialized low cost armor systems. Armor coverage of the vehicle will be complete, providing multi-hit STANAG 4569 Level II protection while also reducing weight. I ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  6. Integrated Wideband Tactical Power Amplifier

    SBC: Vadum, Inc.            Topic: SOCOM13004

    Vadum proposes a feasibility study to define the next generation power amplifier for the Special Operations Forces (SOF) warfighter. This program will deliver extended bandwidth, more complex waveform capability, longer battery life, higher field reliability, and wide compatibility across radio types. The Phase I deliverable will be a comprehensive trade study and a proposed PA design which incl ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  7. Family of Sub-Sonic Ammunition

    SBC: Stillwood Ammunition Systems LLC.            Topic: SOCOM13005

    Technical abstract 13.1-005 Today there is no sub-sonic ammunition currently type classified for use in the calibers provided by any DoD Service. Although sub-sonic rounds exist for some calibers, these rounds are not cost effective and exhibit excessive deviations in velocity (affecting accuracy), incomplete chamber sealing, absence of clean propellant burn, and inability to cycle the action on ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  8. Over the Horizon Underwater Communications

    SBC: Physical Devices, Inc.            Topic: SOCOM13002

    An analysis of alternatives, including modeling, will be conducted of such candidates technologies such as localization, energy provision, and reporting, which are required for long-duration, LPD localization of various types of vessels operating in blue, green and brown water, with near-real time communications, to support global maritime tag track and locate capabilities in support of national a ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  9. Enhanced Small Arms Ammunition

    SBC: CORVID TECHNOLOGIES, LLC            Topic: SOCOM06008

    A number of different special purpose assault rifle rounds are currently required to meet the operational needs of USSOCOM forces. Development of new rounds that provide both enhanced penetration and lethality is necessary to increase the overall effectiveness of USSOCOM forces, and reduce the need for special purpose ammunition. These enhancements must be obtained with sacrificing bullet accura ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
  10. Multi-Purpose, Field Expedient Engineering Composite Material

    SBC: TRIANGLE POLYMER TECHNOLOGIES, INC.            Topic: SOCOM07002

    There is an ongoing requirement for lightweight, strong armor material, long lasting field expedient repair capabilities, and covert attaching of insulated devices to land and water-based targets without inhibiting RF signals. The objective of this proposal is to utilize the epoxy/urethane/acrylate hybrid resin systems that have been commercialized by Triangle Polymer Technologies to develop a str ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government