List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. SENSITIVITY

    SBC: 3c Systems, Inc.            Topic: N/A

    THE OBJECTIVES OF PHASE 1 ARE TO ACQUIRE AND ASSEMBLE DATA ON MUNITION SENSITIVITY TO DYNAMIC INPUTS, DEVELOP DISCRETE ELEMENT CODES FOR LOADING AND REACTION OF EXPLOSIVES AND MUNITIONS, EVALUATE THE PREDICTIVE UTILITY OF THESE CODES TO PREDICT REACTION THRESHOLDS OF MUNITIONS, AND TO PLAN THE PHASE 2 PROGRAM OF TESTING AND COMPUTER MODEL IMPROVEMENT. THE GENERAL APPROACH IN PHASE 1 IS TO EVALUATE ...

    SBIR Phase I 1986 Department of DefenseNavy
  2. SYMPATHETIC DETONATION

    SBC: 3c Systems, Inc.            Topic: N/A

    THE OBJECTIVES OF PHASE 1 ARE TO ACQUIRE AND ASSEMBLE DATA ON MUNITION SENSITIVITY TO SYMPATHETIC DETONATION, DEVELOP DISCRETE ELEMENT CODES FOR LOADING AND REACTION OF EXPLOSIVES, EVALUATE THE PREDICTIVE UTILITY OF THESE CODES TO PREDICT SYMPATHETIC DETONATION OF MUNITIONS, AND TO PLAN THE PHASE 2 PROGRAM OF TESTING AND COMPUTER MODEL IMPROVEMENT. THE GENERAL APPROACH TO PHASE 1 IS TO EVALUATE TH ...

    SBIR Phase I 1986 Department of DefenseNavy
  3. COMPOSITE FLAT SURFACE IN HYPERSONIC FLOW REGIME

    SBC: Advanced Technologies & Testin            Topic: N/A

    IN HYPERSONIC CRUISE, THE OUTER SURFACE OF A VEHICLE MADE OF A COMPOSITE MATERIAL ABLATES. THE ABLATED PARTICLES PENETRATE INTO THE BOUNDARY LAYER AFFECTING THE FLOW DYNAMICS AS WELL AS RADIATIVE AND CONVECTIVE HEAT TRANSFER TO AND FROM THE VEHICLE. THE AUTHORS PROPOSE TO PERFORM THEORETICAL ANALYSIS OF RADIATIVE AND CONVECTIVE HEAT TRANSFER IN A TURBULENT BOUNDARY LAYER OF HEAT RADIATION SCATTERI ...

    SBIR Phase I 1986 Department of DefenseAir Force
  4. ABRASION RESISTANT NON-FLAMMABLE OXIDIZED POLYACRYLONITRILE FABRICS

    SBC: American Hyperform, Inc            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseNavy
  5. COST PRODUCTION TECHNIQUE FOR SOFTWARE

    SBC: AMERIGENICS, INC.            Topic: N/A

    BY IDENTIFYING THE HEURISTICS USED BY EXPERT ESTIMATORS TO DRAW ANALOGIES AND MAKE INFERENCES FROM HISTORICAL DATA AND KNOWLEDGE OF THE DEVELOPMENT PROCESS, AND BY IDENTIFYING AND, TO THE EXTENT POSSIBLE, QUANTIFYING THOSE CRITICAL PARAMETERS THAT DRIVE SOFTWARE, AN "EXPERT SOFTWARE COST ESTIMATING ASSISTANT" WILL BE PRODUCED. IT WILLBE BASED ON INNOVATIVE ARTIFICIAL INTELLIGENCE (AI) AND KNOWLEDG ...

    SBIR Phase II 1986 Department of DefenseNavy
  6. AN ARTIFICIAL INTELLIGENT JOB PERFORMANCE AID (AIJPA) FOR ON-BOARD AUDIO TROUBLESHOOTING

    SBC: AMERIGENICS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseArmy
  7. A STUDY IS PROPOSED TO DEFINE AND EVALUATE CANDIDATE DUAL BALLISTIC COEFFICIENT (BETA) CONFIGURATIONS WHICH ARE FEASIBLE AND APPROPRIATE FOR THE HOMING PRECURSOR JAMMER (HPJ) SYSTEM.

    SBC: Applied Fluid Sciences Assocs            Topic: N/A

    A STUDY IS PROPOSED TO DEFINE AND EVALUATE CANDIDATE DUAL BALLISTIC COEFFICIENT (BETA) CONFIGURATIONS WHICH ARE FEASIBLE AND APPROPRIATE FOR THE HOMING PRECURSOR JAMMER (HPJ) SYSTEM. EMPHASIS WILL BE PLACED ON EVOLVING CONFIGURATIONS FEATURING MODERATE-TO-HIGH BETA AERODYNAMICALLY STABLE FIRST-STAGE FLIGHT PERFORMANCE AT HYPERSONIC/ SUPERSONIC SPEEDS, AND LOW-BETA AERODYNAMICALLY STABLE SECOND-STA ...

    SBIR Phase I 1986 Department of DefenseAir Force
  8. A STUDY IS PROPOSED TO DEFINE AND EVALUATE FEASIBLE JAMMER EXPULSION CONCEPTS FOR THE HOMING PRECURSOR JAMMER (HPJ) SYSTEM, AND TO ASSESS THE IMPLICATIONS OF CANDIDATE EXPULSION CONCEPTS ON JAMMER AEROTHERMODYNAMIC PERFORMANCE AND REQUIREMENTS.

    SBC: Applied Fluid Sciences Assocs            Topic: N/A

    A STUDY IS PROPOSED TO DEFINE AND EVALUATE FEASIBLE JAMMER EXPULSION CONCEPTS FOR THE HOMING PRECURSOR JAMMER (HPJ) SYSTEM, AND TO ASSESS THE IMPLICATIONS OF CANDIDATE EXPULSION CONCEPTS ON JAMMER AEROTHERMODYNAMIC PERFORMANCE AND REQUIREMENTS. CONCEPTS WHICH FEATURE THE SEQUENTIAL EXPULSION/EJECTION OF INDIVIDUAL JAMMERS AXIALLY OUT THE REAR OF THE CARRIER VEHICLE WILL BE EMPHASIZED. RELIABLE CON ...

    SBIR Phase I 1986 Department of DefenseAir Force
  9. PROPERTIES IN THE 1-10 KILOBAR PRESSURE REGION

    SBC: Applied Research Associates, Inc.            Topic: N/A

    GEOLOGIC MATERIAL PROPERTY REQUIREMENTS FOR NUMERICAL CALCULATION OF AN EXPLOSIVE EVENT DEPEND ON SEVERAL FACTORS, INCLUDING: THE PEAK PRESSURE EXPECTED OR ACHIEVED, THE GEOMETRY OF LOADING, AND THE TYPE OF CALCULATION BEING PERFORMED. ADDITIONALLY, THE CLASS OF GEOLOGIC MATERIAL INVOLVED; E.G., SAND VERSUS CLAY VERSUS ROCK, WILL DICTATE REQUIREMENTS BASED ON WHAT ARE ANTICIPATED TO BE THE IMPORTA ...

    SBIR Phase I 1986 Department of DefenseAir Force
  10. LIQUID EXOATMOSPHERIC COUNTERMEASURES

    SBC: Astro Innovations Inc            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government