List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Extensible Modeling to Create Knowledgebase for AM Processing of Alloy GrCop-84

    SBC: Applied Optimization, Inc            Topic: T12

    The research objective of the proposed work is to demonstrate feasibility of utilizing extensible modeling to create an AM knowledgebase for copper alloy, GrCop-84, and utilize it to design an AM process for GrCop-84. The work plan has three tasks: (1) Utilize process modeling to demonstrate feasibility of predicting AM process parameters for alloy GrCop-84 for the powder bed and blown powder proc ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Next Generation Water Recovery for a Sustainable Closed Loop Living

    SBC: Faraday Technology, Inc.            Topic: T6

    Among numerous technological advances sought in order to facilitate human space travel, innovations are needed that supports the mass- and energy-efficient maintenance of closed air, water, and waste systems in spacecraft habitats that operate on planetary environments such as Mars and within microgravity. Waste-water treatment system on board the ISS is one such system that has lifetime/durabilit ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  3. NONA Repair of Composite Structures

    SBC: Cornerstone Research Group, Incorporated            Topic: T1202

    Supporting aerospace mission readiness, a system is needed that allows for composite repairs without the current roadblocks imposed by ovens, autoclaves, and expensive tooling. Cornerstone Research Group (CRG), its subsidiary NONA Composites, and the University of Dayton Research Institute (UDRI) presents NASA with the opportunity to obtain a rapid and robust method for on-site composite structura ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  4. High Density Hybrid Motors

    SBC: Terves Inc.            Topic: T101

    The Phase I STTR project will develop an ignition system for a high density hybrid rocket motor using non-toxic, storable, ionic liquid oxidizers and high density polymer fuels. The program will also research fuel additives to boost ISP and fuel regression rate of the high density, high regression ate fuel.. This high density propulsion system resolves one of the chief drawbacks of hybrid rock ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  5. Next Generation Water Recovery for a Sustainable Closed Loop Living

    SBC: Faraday Technology, Inc.            Topic: T601

    Among the numerous technological advances sought in order to facilitate human space travel, solutions and innovations are needed for techniques that supports the mass- and energy-efficient maintenance of closed air, water, and waste systems in spacecraft habitats that operate within microgravity. As missions are foreseen to be extended with limited earth resupply available there is need to develop ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  6. Empirical Optimization of Additive Manufacturing

    SBC: Universal Technology Corporaration            Topic: T1204

    In this Phase II STTR project, the proposed collaborative effort between UTC, AFIT, and ULRF represents a crucial step forward for AM.  UTC’s unique AM optimization and process control framework, constructed entirely from experimental sensor data collected in-situ, will finally transfer technology from our SLM test bed system to state-of-the-art and commercial-grade systems, including a ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  7. Empirical Optimization of Additive Manufacturing

    SBC: Advratech            Topic: T1204

    In this Phase I STTR project, pursuant to the Materials Genome Initiative (MGI) and Integrated Computational Materials Engineering (ICME) interests, the proposed collaborative effort between WSU and Advratech will represent the first AM optimization framework of its kind, constructed entirely from experimental sensor data collected in-situ. Rather than using in-process data to inform limited "phy ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  8. NONA Repair of Composite Structures

    SBC: Cornerstone Research Group, Incorporated            Topic: T1202

    While much attention is necessarily focused on the evaluation and certification of the materials and processes involved in adhesive bonding, development is still needed in decreasing the cost, time, and complexity of the current repair concepts. A material and processing system is needed that allows the design, infusion, and cure of composite repairs without the current roadblocks imposed by ovens ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  9. Physics and Statistics Based Selection of SLM and EBM Process Parameters to Mitigate Defects and to Control Deposit Microstructure

    SBC: Applied Optimization, Inc            Topic: T1204

    The ability to assign a level of confidence for build quality is fundamental to the deployment of powder bed technology. Accordingly, the research objective of this work is to use probability theory as a glue to combine the physics-based models used for the selection of processing parameters together in order to produce quality deposits using the following approach: (1) Use probability theory as ...

    STTR Phase II 2015 National Aeronautics and Space Administration
  10. Green, Compact Hybrids for Nanosatellite Launchers

    SBC: Terves Inc.            Topic: T101

    Low cost access to space is essential for continued commercial exploitation of near-earth environments, and to support future science missions. A serious limitation on the cost of space access is the available propellants and propulsion system technologies for launch, orbital insertion, maneuvering and orbital reinsertion, and reaction and attitude control.This Phase I STTR program will validate i ...

    STTR Phase I 2015 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government