Award Data

ABOM has developed a novel active anti-fog technology platform that has solved the problem of eyewear fogging. These fog-free and ballistics-rated polycarbonate lenses provide the individual soldier with sustained distant visual acuity and improved situational awareness. Under this proposed SBIR Phase I project, ABOM will perform evaluation and feasibility studies for four proposed Military Combat ...

This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

Indiana Microelectronics is proposing an alternative design for a high-speed missile to missile radio frequency communications link. The concept is to implement a reconfigurable, full duplex, software defined Ku band transceiver to allow for faster data throughput and better interference mitigation than existing downlinks. The system would be designed to operate at a higher frequency than the exis ...

With adversaries continuing to advance ballistic missile technologies, the next generation of missile interceptors must increase their capabilities to provide an effective defense. IN Space proposes the development of a digital solid propellant thruster array based on a high strength, high performance composite solid propellant with an unmatched burning rate in order to achieve a responsive, high ...

Group 2-3 UAS engines have low mean time between overhauls (MTBOs), often with as little as 200-400 hours before maintenance must be conducted.This leads to significant maintenance cost and logistics tail for deployed operations.Two-stroke piston and rotary engines for Group 2-3 platforms have common maintenance drivers such as carbon fouling, and wear of cylinders, housings and bearings.Phase I r ...

The impact of metal whiskers on the reliability of electronics has been exacerbated by environmentally-driven efforts to eliminate lead from tin plating and solders. Even exempt applications, such as military, are affected due to COTS. Foresite, Inc., a consultant, laboratory and test equipment development company, has a goal for the subject research, in collaboration with Purdue University, to ...

There is a need for a high-resolution two-dimensional focal plane array (FPA) with single photon sensitivity (SPS), pulse amplitude storage, and GHz bit rates that can record both the time (with 10 bits) from multiple returns from a single laser pulse. Such a system has the potential to significantly reduce LADAR size, weight, and power (SWAP) by alleviating the laser requirements. In this program ...

New, modular radiation hard [>300 kRad (Si)] ROIC designs are required to address the needs of planned ballistic missile defense system. Anticipating the needs for large formats, small pixel sizes, and multiple spectral bands, the features of an existing radiation-hard space imager ROIC will be used to develop the design of an extensible 1024 × 1024, 15-μm pixel ROIC design. The design includes ...

Future seekers of the future will need to allow for multiple targets and various advanced countermeasures, likely including a dual-mode component to do so. A Dual Mode Seeker (DMS) has at least an infrared (IR) Focal Plane Array (FPA) as well as an active means to capture target range and preferably 3-D imagery. Future technology insertion will benefit from a monolithic dual mode focal plane, wher ...

A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...