Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Light weight Rubidium-Metal Vapor Circulating System

    SBC: Frederick T. Elder & Associates            Topic: MDA12018

    Frederick T. Elder & Associates(FTEA) proposes an approach to the development of a closed-cycle Helium-Rubidium(He-Rb) circulator that allows for FTEA to ensure safety throughout the project, to manufacture a prototype at a reasonable cost using mostly commercial components if selected for Phase II, and to meet or exceed the requirements outlined in the solicitation. FTEA has considered existing D ...

    SBIR Phase I 2013 Department of DefenseMissile Defense Agency
  2. Alternative Source for Neutron Generation

    SBC: Phoenix LLC            Topic: A12088

    Phoenix Nuclear Labs (PNL) will perform a comprehensive analysis of all existing and proposed neutron generator technologies that do not utilize highly enriched fissile material. These technologies include the flux compression generator, dense plasma focus, high current deuterium-tritium fusion, and high current electrons incident upon uranium-238. Other technologies will also be identified and ...

    SBIR Phase I 2013 Department of DefenseArmy
  3. Chimeric Autologous/Allogeneic Constructs for Skin Regeneration

    SBC: Stratatech Corporation            Topic: OSD11H10

    Complex skin defects, including burns and trauma, represent a major medical problem affecting both military and civilian populations. In recent military engagements, burns account for approximately 5% of combat casualties. Furthermore, approximately 1.25 million Americans each year require medical attention for complex skin defects, with 50,000 people hospitalized for burns and 13,000 requiring sk ...

    SBIR Phase II 2013 Department of DefenseDefense Health Program
  4. Synthesis of New, Insensitive Energetic Materials

    SBC: Orbital Technologies Corporation            Topic: N11AT034

    Advanced ordnance and propulsion systems utillize materials, such as RDX and HMX, that provide good performance but cannot meet todays more stringent safety and environmental requirements. Unfortunately, in newer compounds created to replace them, the performance falls with the sensitivity. The ORBITEC team proposes the development of new energetic materials that will be both high performance and ...

    STTR Phase II 2013 Department of DefenseNavy
  5. A High Flux Neutron Generator for Measuring Bulk Residual Stress via Diffraction

    SBC: Phoenix LLC            Topic: AF131119

    ABSTRACT: Residual stresses can be created in engineered components by most common fabrication processes (e.g., welding, joining, machining, casting, heat treating, press fitting, etc.). They are of particular concern to the aerospace industry because they are difficult to measure and can lead to premature failure of flight-critical components. There are several established methodologies for ch ...

    SBIR Phase I 2013 Department of DefenseAir Force
  6. Development of High-Fidelity Modeling Tools to Predict Radiative Signatures from Hypervelocity Impact Flash Events

    SBC: Prism Computational Sciences, Inc.            Topic: MDA06047

    In the proposed Phase II Enhancement, Prism Computational Sciences, Corvid Technologies, and Bodkin Design and Engineering will perform experimental and simulation studies of the optical emission from impact flash events. This collaboration builds on the SBIR Phase II efforts of the Prism-Corvid team to apply high-fidelity simulation tools to study impact flash line emission from laboratory gas-g ...

    SBIR Phase II 2013 Department of DefenseMissile Defense Agency
  7. Liquid Crystal-based Sensors for Detection of Airborne Toxic Chemicals for Integration with Unmanned Robotic Systems

    SBC: Platypus Technologies, LLC            Topic: A13AT004

    We aim to develop lightweight and rugged liquid crystal (LC)-based sensors suitable for integration into small unmanned vehicles, including hand-launched UAVs and throwable robots. For Phase I proof of concept, we propose to develop sensors that detect DMMP, H2S, NO2 and NH3. These gases include simulants of chemical warfare agents and toxic industrial chemicals, selected for their relevance to ...

    STTR Phase I 2013 Department of DefenseArmy
  8. Surface-Emitting, Monolithic Beam-Combined Mid-Wave IR Quantum Cascade Lasers

    SBC: INTRABAND, LLC            Topic: N13AT006

    The technical objectives of this proposal are: (1) design a grating-coupled surface-emitting (GCSE) active-photonic-crystal (APC) 4.6 micron-emitting quantum-cascade laser (QCL) to deliver 15 W diffraction-limited CW power in the main lobe of the far-field beam pattern; (2) design a GCSE-APC QCL structure with monolithic aperture-filling optical elements for obtaining close to 90 % of the surface- ...

    STTR Phase I 2013 Department of DefenseNavy
  9. Monolithic Scalable Mid-Infrared Phase-Locked Laser Array

    SBC: INTRABAND, LLC            Topic: N11AT011

    The technical objectives of this proposal are: 1) Design a metal/semiconductor grating-based (i.e., substrate-emitting) Grating-Coupled Surface-Emitting Distributed Feedback Quantum Cascade Laser (GCSE-DFB QCL) emitting at 4.6 microns with high beam quality; and 2) Demonstrate a GCSE-DFB QCL emitting at 4.6 microns with single-lobe-beam operation and high beam quality, under CW operation. It is th ...

    STTR Phase II 2013 Department of DefenseNavy
  10. Roll-to-Roll Printing of Patterned Nanomembranes on Flexible Substrates

    SBC: SysteMECH, Inc            Topic: OSD10T005

    Flexible electronic and optical devices, including sensors/detectors, waveguides, and photonic crystal structures, have significant promise for improving communication and information processing capabilities in a number of military and commercial applications. However, the development of such flexible devices has been hindered by the lack of effective manufacturing processes for producing these de ...

    STTR Phase II 2013 Department of DefenseAir Force
US Flag An Official Website of the United States Government