List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. The First Intelligent Wearable Device to Enhance Student Attention Through Personalized Self-Monitoring and Reinforcement

    SBC: FokusLabs Behavioral Solutions, Inc.            Topic: edIES17R0005

    With this Phase I funding, the project team will develop and test a prototype of a hardware and web-based social and behavioral intervention to improve self-regulation (SR) of students in grades 3 to 5. The prototype will include a wearable wristband that gently vibrates from time to time during the school day to prompt students to indicate their level of SR (e.g. level of focus, attention, self-c ...

    SBIR Phase I 2017 Department of EducationInstitute of Education Sciences
  2. Inflatable Capsule Recovery Raft using OTS Pontoons and Other Components

    SBC: ASRC Federal System Solutions, LLC            Topic: H1002

    The objective of the proposed innovation is to research and study the feasibility of using pontoons (based on Off the Shelf (OTS) equipment) to make an inflatable raft that will support a water-landed space capsule. The advantages of this approach over traditional methods are: 1) Provides stable platform to open hatch for Flight Crew access/egress in less than 1 hour from the time the recovery ves ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  3. Impact-Resistant, Damage-Tolerant Composites with STF Energy Absorbing Layers

    SBC: STF Technologies LLC            Topic: H401

    We propose an innovative hybrid composite that combines the smart energy-absorbing shear thickening fluids (STF) with validated hard upper torso composite materials to create new STF composite structures with superior impact and damage resistance and self-healing functionality. The proposed innovation directly addresses the subtopic H04.01 need for thin, lightweight composite materials that can be ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  4. Impact Resistant Composite Structures for Space Suit Applications

    SBC: Composites Automation LLC            Topic: H401

    Composites Automation (CA) and partners University of Delaware Center for Composite Materials (UD-CCM) and ILC Dover, propose to evaluate innovative composite material and structure concepts that improve impact performance for space suite hard composite components. A systematic experimental screening methodology in Phase I, followed by detailed design and assessment in Phase II. Material innovatio ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  5. The Vulcan Advanced Hybrid Manufacturing System

    SBC: Made In Space, Inc.            Topic: H702

    Made In Space is developing the The Vulcan Advanced Hybrid Manufacturing System (VULCAN) to address NASA?s requirement to produce high-strength, high-precision components on-orbit with comparable quality to commercially-available, terrestrial machined parts. Such capability enables the in-situ manufacturing of critical parts for human spaceflight and without dependence on terrestrial resupply. Mad ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  6. Industrial Crystallization Facility for Nonlinear Optical Materials

    SBC: Made In Space, Inc.            Topic: H801

    Made In Space, Inc. (MIS) proposes the development of an Industrial Crystal Facility (ICF) for microgravity product manufacturing and applied research. The ICF is focused on advanced materials engineering, rather than biomedical research, and serves a complimentary role to existing NASA-developed hardware, expanding utilization of ISS. Intended applications include nonlinear optical single crystal ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  7. Microwave Photonic Imaging Radiometer

    SBC: Phase Sensitive Innovations, Inc.            Topic: S103

    Passive Microwave Remote Sensing is currently utilized by NASA, NOAA, and USGIS to conduct Earth Science missions, including weather forecasting, early warning systems, and climate studies. Due to budgetary constraints and lack of reliable access to medium-lift vehicles, the current trend in the space industry is towards smaller, cheaper, and more frequent missions. Nano-satellites, such as Cube ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  8. A New Architecture for FUN3D on Modern HPC Systems

    SBC: EM PHOTONICS INC            Topic: S501

    The goal of this project is to refactor NASA's FUN3D computation fluid dynamic (CFD) simulation code to enable it to take full advantage of accelerator hardware available on modern hybrid computing environments. We will rearchitect FUN3D to take advantage of HPC tools we are currently building for NASA Goddard, using a dynamically-scheduled, task-based approach, with the goals of improving scalabi ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  9. Structural-Health Aware Failure-Tolerant Engineered to Respond (SAFER) Additively Manufactured Systems

    SBC: Made In Space, Inc.            Topic: T1201

    Structural degradation and failure can cause malfunctions and long-term problems aboard spacecraft, jeopardizing the crew, especially in deep space missions. On Off-world habitats, this can lead to extensive maintenance procedures and dangerous EVAs to fix malfunctions. Micrometeorite impact and shielding breaches can have lasting impacts that pose a significant hazard to the longevity of mission ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  10. Design and Process Development of Thin-Ply Composites

    SBC: Composites Automation LLC            Topic: T1203

    This project evaluates automated tape placement (ATP) processing of thin ply composites, including process and design modeling, test panel fabrication and mechanical performance evaluation. Key to successful transition of standard ply to thin ply ATP processing is the ability to fabricate uniform high fiber volume and fiber distribution composite parts with below 1% void content. Our ATP robotic s ...

    STTR Phase I 2017 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government