List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 17638 results
  1. High Energy Density, Long Cycle Life and Safe Li-S Battery

    SBC: ADA Technologies, Inc.            Topic: A17050

    The U.S. Army has identified a need for improved soldier and device mobility. To address these needs, ADA Technologies Inc. (ADA) will develop and commercialize our high energy density, long cycle life and safe lithium-sulfur (Li-S) battery technology. Our solution is based on proven material design strategies that will improve cell constituent stability via the use of atomic level coatings on the ...

    SBIR Phase I 2019 Department of DefenseArmy
  2. A Sparse Information Processing Refinery for Aviation Sustainment

    SBC: Oceanit Laboratories, Inc.            Topic: A18004

    Oceanit proposes to develop a Sparse Information Processing Refinery (SIPR) targeted to the sustainment of aviation platforms, which is a graphical environment for managing and extracting information from aviation data.Unlike most existing platforms, SIPR is designed for the case where data are sparse and/or difficult to obtain.To make the most of a limited data set, SIPR leverages recent advances ...

    SBIR Phase I 2019 Department of DefenseArmy
  3. Data Converter Systems on Chip

    SBC: SILICON TECHNOLOGIES, INC.            Topic: A18009

    Silicon Technologies will design and simulate in Verilog-AMS and Cadence Spectre an ADC, two DACs, a serial interface and other circuits to be built on a single chip in a ITAR complaint manufacturing process.The ARMY is interested in this development for use in a SWAP-C ASIC for next generation fuse proximity sensors and other programs.STI proposes to use an existing pipelined ADC that has been bu ...

    SBIR Phase I 2019 Department of DefenseArmy
  4. Nuetralize Enemy Drones

    SBC: IMSAR LLC            Topic: A18010

    In order to address the improvised threat to U.S. Forces created by enemy drones, IMSAR proposes to use its Commercial, Off-The-Shelf (COTS) NSP-3 Ku-band radar as the foundation for a system architecture capable of detecting, tracking, and neutralizing enemy drones. With low Size, Weight, and Power (SWaP) requirements, the NSP-3 can provide high capabilities to even small Unmanned Aircraft System ...

    SBIR Phase I 2019 Department of DefenseArmy
  5. Novel Combustible Cartridge Cases for Next Generation Small Arms Ammunition

    SBC: ROCKY MOUNTAIN SCIENTIFIC LABORATORY, LLC            Topic: A18013

    The loadout that a deployed soldier carries is between 97-135 lbs, approximately 5lbs of which are inert brass. This weight not only reduces the soldiers responsiveness during battle but can increase fatigue.Much time and money has been spent on reducing ammunition weight by replacing heavy brass casings with steel or polymers. While these show promise, a combustible cartridge case will not only r ...

    SBIR Phase I 2019 Department of DefenseArmy
  6. Innovative Marking Technology for Hand Grenades

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: A18077

    The MK3A2 offensive hand grenade has been out of commission since 1975, leaving warfighters with stun (flash) and fragmentation grenades, which do not have the level of lethality for incapacitating enemy combatants. Efforts have been in the forefront to develop an optimized replacement. The objective of the Topic A181-077 SBIR program is to develop a novel and innovative technology that produces d ...

    SBIR Phase I 2019 Department of DefenseArmy
  7. Marking System for Durable Labeling of Munitions

    SBC: CREARE LLC            Topic: A18077

    Hand grenades require highly legible, long-lived identification markings that are resistant to wear and field chemicals. Creating such markings on grenades is challenging, especially when their surfaces are rounded and made of chemically resistant plastics. Creare proposes to develop an additive marking process capable of producing robust color markings on curved plastic surfaces with high resolut ...

    SBIR Phase I 2019 Department of DefenseArmy
  8. Wireless Blast Gauge with BOP Impulse Noise Tracking for Artillery & Mortar Personnel

    SBC: BLACKBOX BIOMETRICS, INC.            Topic: A18078

    We propose advancing our proven Wireless Blast Gauge System to extend the BOP range to capture impulse noise. Ultimately, the Blast Gauge System will be integrated with the weapons DFCS to automatically provide data to the crew chief and platoon / battery leadership to support informed decisions during live fire training and combat missions.

    SBIR Phase I 2019 Department of DefenseArmy
  9. Blast Overpressure Omnidirectional Measurement Device

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18078

    Mainstream proposes developing a blast overpressure omnidirectional measurement (BOOM) device that detects, records, and transmits captured data for blast events experienced by individual personnel. The BOOM device is composed of a microcontroller that collects, stores, and transmits data collected from several miniature pressure transducers placed on personnel. The sensors enable capture of the p ...

    SBIR Phase I 2019 Department of DefenseArmy
  10. Novel Manufacturing of Bimetallic Gun Barrels

    SBC: Ormond, LLC            Topic: A18090

    Gun barrels are subjected to wear and erosion from the hot propellant gases and high loads from the passage of projectiles.Sustained fire duration and rate of fire are largely limited by barrel thermal considerations, since the heat buildup in the barrel can cause rounds to fire prematurely (cook-off) or weaken the barrel and cause catastrophic failure. A cost effective solution of using a wear re ...

    SBIR Phase I 2019 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government