You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Reliable, Efficient, Lightweight Cryocooler for ISRU

    SBC: CREARE LLC            Topic: N/A

    Future planetary exploration missions will require technology for In-Situ Resource Utilization (ISRU) to minimize launch mass, risk, and cost. We propose an innovative cryocooler for in-situ separation of gases and production of cryogens. Key applications will be production and storage of liquid oxygen needed as propellant oxidizer, liquid oxygen supply for EVA suits for Mars exploration, and cond ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  2. Ultra-Compact Heat Exchangers for Space-Borne Cryocoolers

    SBC: CREARE LLC            Topic: N/A

    Low-temperature cryocooler systems need recuperative heat exchangers with extremely high-thermal effectiveness (0.997 or greater) to achieve cooling in the 10 K range. For space-borne cryocoolers for sensor cooling, these recuperators must also be compact, lightweight, and cause minimal pressure losses in the gas stream. To meet these challenging requirements, we propose to develop a radial flow h ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  3. A Fault-Tolerant Heat Exchanger for Manned Spacecraft

    SBC: CREARE LLC            Topic: N/A

    The specific proposed innovation is a compact, fluid-to-fluid heat exchanger that is fault tolerant because the working fluids cannot come into contact even if there are large internal leaks. Manned spacecraft typically use water-based, secondary coolant loops to isolate the crew from toxic or asphyxiating fluids (such as ammonia or freon) in the central thermal bus. The innovation is a fabricatio ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  4. Aerospace Model Maker System

    SBC: SANDERS DESIGN INTERNATIONAL            Topic: N/A

    The proposed Sanders Aerospace ModelMaker (AMM) system provides an innovative rapid prototyping method of fabricating aerospace wind tunnel test models that dramatically increases instrumentation effectiveness with reduced complexity, cost and construction time. The AMM uses an in-situ layered deposition process to build ceramic test models that withstand high temperatures and have fully integrate ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government