Award Data

Phase II Project Scope: ATI has developed an open source Signal Control Programming Environment (SCOPE) that ➢ Implements Actuated Control with Min Recall Mode, Max Recall Mode, Gap Out Mode, Max Out Mode, Presence Mode, Lane-by-Lane Control. ➢ Contains a Pretimed Mode allowing control of 3-leg, 4-leg, and Texas Diamond Intersections ➢ Can be easily ported to any operating system. ➢ Can ha ...

Future NASA Space Science Missions will incorporate detectors, sensors, shields, and telescopes that must be cooled to cryogenic temperatures. An enabling technology for these missions is advanced cryocoolers that can provide continuous and distributed cooling with minimal input power. On this program, Creare proposes to develop and demonstrate an innovative cryocooler that produces refrigeratio ...

Using small aperture telescopes for detecting exoplanets could have a significant impact on astronomy and other imaging and space communication systems. In this new generation of smaller, lighter and more affordable coronagraph systems, the starlight is rejected with the aid of phase-based transparent masks capable of transmitting planetary light at small angular separation from the star. These so ...

This proposal is responsive to NASA SBIR Topic X10.01, specifically, the need for efficient small- to medium-scale hydrogen liquefaction technologies, including domestically produced wet cryogenic turboexpanders. Future NASA missions will require hydrogen liquefaction systems for spaceport, planetary, and lunar surface operations. A critical part of these systems is the cryogenic expansion turbi ...

Interdisciplinary Consulting Corporation proposes a sensor that offers the unique capability to make non-intrusive, direct, simultaneous mean and fluctuating shear stress measurement for subsonic and transonic test applications. Currently a standard for shear stress measurement tool does not exist. A precise silicon micromachined, differential capacitive, instrumentation grade sensor will facili ...

High-temperature passive wireless surface acoustic wave (SAW) sensors are highly desirable for improving safety and efficiency in aviation and space vehicles. This proposal addresses the growth and processing of a new class of high temperature material into acceptable SAW wafers, the production of SAW temperature sensors, and the integration of the SAW and thin film antenna (SAWtenna). The proje ...

A significant challenge faced by space-bound experiment packages is the requirement for a minimally controlled environment while a small payload is awaiting launch or is in transit to the International Space Station (ISS). NASA is seeking thermal solutions for the transportation of NanoRack and CubeSats experimental payloads. This proposal discusses a unique thermally-controlled storage/shipping ...

Hybrid turbo-electric aircraft with gas turbines driving electric generators connected to electric propulsion motors have the potential to transform the aircraft design space by decoupling power generation from propulsion. Resulting aircraft designs such as blended-wing bodies with distributed propulsion can provide the large reductions in emissions, fuel burn, and noise required to make air tran ...

A Communications, Navigation, and Networking reConfigurable Testbed (CoNNeCT) experiment is proposed to improve the performance of GPS during geomagnetic storms. There are two primary sources of degradation during a geomagnetic event?loss of phase coherency by the receiver and abrupt path delay changes due to total electron content (TEC). By monitoring the degradation at the ISS instead of the E ...

We propose a high-performance broadband infrared focal plane array (FPA) for the Thermal Infrared Sensor (TIRS) on NASA's LANDSAT satellite. The FPA will feature a cutoff wavelength of 13 microns, operate at>55K, have a format of 640x512, quantum efficiency>30%, and will be realized using Type-II InAs/GaSb strained layer superlattice (SLS) photodiodes. In Phase I we will develop the basic d ...