You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Real Time Signal State Transition Software for ATC- NTCIP Interface

    SBC: Advanced Technologies, Inc            Topic: 06FH1

    Phase II Project Scope: ATI has developed an open source Signal Control Programming Environment (SCOPE) that ➢ Implements Actuated Control with Min Recall Mode, Max Recall Mode, Gap Out Mode, Max Out Mode, Presence Mode, Lane-by-Lane Control. ➢ Contains a Pretimed Mode allowing control of 3-leg, 4-leg, and Texas Diamond Intersections ➢ Can be easily ported to any operating system. ➢ Can ha ...

    SBIR Phase II 2012 Department of Transportation
  2. New Flexible FR Polyurethane Foams for Energy Absorption Applications

    SBC: Gordon Nelson and Associates            Topic: T703

    Development of new polyurethane (PU) insulation foams through a non-toxic environmentally friendly composite approach. Target FR foams will exhibit high heat flow resistance as well as lower density than conventional PU. Foams involve synergism between novel phosphonate FRs and smoke suppression agents coupled with use of aerogel. Preliminary data show peak heat release rates reduced by 50% ver ...

    STTR Phase I 2012 National Aeronautics and Space Administration
  3. Colosed-Loop Control of the Thermal Stir Welding Process to Enable Rapid Process/Ppart Qualification

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T901

    Thermal Stir Welding (TSW) provides advancement over the more conventional Friction Stir Welding (C-FSW) process because it separates the primary processes variables thereby allowing independent control of metal stirring and forging from the stir zone temperature. However, the feedback for precise control of the stir zone temperature, and hence the process parameters to sustain that temperature w ...

    STTR Phase I 2012 National Aeronautics and Space Administration
  4. Wireless SAW Sensor Strain Gauge&Integrated Interrogator Design

    SBC: Mnemonics, Inc.            Topic: T701

    The proposed Wireless, passive, SAW sensor system operates in a multi-sensor environment with a range in excess of 45 feet. This proposed system offers unique features in two (2) important areas. The first is in the development of a new sensor type, a strain gauge that is based on OFC techniques and implemented with the low loss characteristics of SAW Unidirectional transducers. The second is in t ...

    STTR Phase II 2012 National Aeronautics and Space Administration
  5. An Ultra Low Power Cryo-Refrigerator for Space

    SBC: CREARE LLC            Topic: S107

    Future NASA Space Science Missions will incorporate detectors, sensors, shields, and telescopes that must be cooled to cryogenic temperatures. An enabling technology for these missions is advanced cryocoolers that can provide continuous and distributed cooling with minimal input power. On this program, Creare proposes to develop and demonstrate an innovative cryocooler that produces refrigeratio ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  6. Achromatic Vector Vortex Waveplates for Coronagraphy

    SBC: Beam Engineering For Advanced Measurements Co.            Topic: S202

    Using small aperture telescopes for detecting exoplanets could have a significant impact on astronomy and other imaging and space communication systems. In this new generation of smaller, lighter and more affordable coronagraph systems, the starlight is rejected with the aid of phase-based transparent masks capable of transmitting planetary light at small angular separation from the star. These so ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  7. An Advanced Wet Expansion Turbine for Hydrogen Liquefaction

    SBC: CREARE LLC            Topic: X1001

    This proposal is responsive to NASA SBIR Topic X10.01, specifically, the need for efficient small- to medium-scale hydrogen liquefaction technologies, including domestically produced wet cryogenic turboexpanders. Future NASA missions will require hydrogen liquefaction systems for spaceport, planetary, and lunar surface operations. A critical part of these systems is the cryogenic expansion turbi ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  8. MEMS Skin Friction Sensor

    SBC: Interdisciplinary Consulting Corporation            Topic: A401

    Interdisciplinary Consulting Corporation proposes a sensor that offers the unique capability to make non-intrusive, direct, simultaneous mean and fluctuating shear stress measurement for subsonic and transonic test applications. Currently a standard for shear stress measurement tool does not exist. A precise silicon micromachined, differential capacitive, instrumentation grade sensor will facili ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  9. New Wireless Sensors for Diagnostics Under Harsh Environments

    SBC: Krystal Engineering LLC            Topic: A102

    High-temperature passive wireless surface acoustic wave (SAW) sensors are highly desirable for improving safety and efficiency in aviation and space vehicles. This proposal addresses the growth and processing of a new class of high temperature material into acceptable SAW wafers, the production of SAW temperature sensors, and the integration of the SAW and thin film antenna (SAWtenna). The proje ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  10. Demonstration of a Thermally-Controlled Shipping Container for NanoRack and CubeSat Payloads

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: O306

    A significant challenge faced by space-bound experiment packages is the requirement for a minimally controlled environment while a small payload is awaiting launch or is in transit to the International Space Station (ISS). NASA is seeking thermal solutions for the transportation of NanoRack and CubeSats experimental payloads. This proposal discusses a unique thermally-controlled storage/shipping ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government