Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Pedestrian Auto Enforcement Program (PAEP)

    SBC: Polaris Sensor Technologies, Inc.            Topic: 122FH3

    We propose an innovative Pedestrian Automotive System for Enforcement and Safety (PASES) that combines commercial-off-the-shelf video or camera components and state-of-the-art microwave(radar) systems with sophisticated software that will not only provide more effective enforcement through effective evidentiary information, but will also enable predictive actions based on vehicle and pedestrian be ...

    SBIR Phase I 2013 Department of Transportation
  2. A Multi-Sensor Hybrid System for Vehicle Classification of Thirteen Classes

    SBC: Migma Systems Inc.            Topic: 081FH4

    Image processing methods have been studied and implemented for the vehicle classification over the past decades. The most dominant approach is the use of vehicle dimension, which requires complex processes of sensor calibration as the vehicle dimensions shown in the imagery are heavily dependent on the camera’s field of view. In general, video systems have physical disadvantages related to the ...

    SBIR Phase II 2013 Department of Transportation
  3. Chemical-Free Deicing- A Systems Approach

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    This proposal describes an innovative approach to non-chemical deicing of aircraft which focuses on new technology which could provide revolutionary improvement in the performance of a relatively mature deicing technique. This combined systems approach could be readily incorporated into existing aircraft and ground support equipment. We propose to develop a permanent anti-icing surface treatment ...

    SBIR Phase I 1996 Department of Transportation
  4. "An Object Oriented Network Data Model for Transportation GIS"

    SBC: Gis/trans, Ltd            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  5. MWM-Array Characterization of Widespread Fatigue Damage Onset

    SBC: Jentek Sensors, Inc.            Topic: N/A

    This proposal will investigate the potential of an enhanced version of the Meandering Winding Magnetometer (MWM), called the MWM-Array, to characterize and predict remaining life for components experiencing widespread fatigue damage. The MWM has already demonstrated the potential to characterize fatigue damage in metals priod to the formation of cracks, as well as the ability to detect and charac ...

    SBIR Phase I 1996 Department of Transportation
  6. Automated Production of Composite Energy Absorbing Utility Poles

    SBC: KaZaK Composites Incorporated            Topic: N/A

    KaZaK Composites, Kaman Sciences and Dr. Malcolm Ray of the University of Iowa propose to investigate the design of energy absorbing utility poles made from composite materials. This team has considerable experience in the multiple technologies needed to successfully complete the proposed program, including design of high performance composite products for automated production and design, analysi ...

    SBIR Phase I 1996 Department of Transportation
  7. Monolithic Fully Integrated Optic Inertial Navigation System

    SBC: Optisensors Inc            Topic: N/A

    The GPS is an affordable and accurate means of guiding military and civilian aircraft. However, at times the GPS signal becomes blocked or degraded due to loss of satellite lock or poor viewing angle. It is necessary to back it up with inertial navigation. However, there is no INS system which is accurate enough and inexpensive enough to do the job. A completely monolithic fully integrated INS ...

    SBIR Phase I 1996 Department of Transportation
  8. An Inexpensive Structural Core Material for Composite Bridges

    SBC: Polymer Bridge Systems, Inc.            Topic: N/A

    Polymer Bridge Systems, with over 8 years of research composite bridges, found that success hinges on being dollar-for-dollar cost competitive with steel and concrete. We founded the four "golden rules" that are required: the bridge must be: 1) factory build; 2) road transportable; 3) installed in 1 eight-hour day; and 4) be cost-competitive on an installed cost basis. This bridge will be buil ...

    SBIR Phase I 1996 Department of Transportation
  9. A Novel Sensor & Diagnostic System for High Speed Composite Flywheels

    SBC: RCT Systems, Inc.            Topic: N/A

    This proposal describes the development of a novel inductive/dielectric sensor-based composite flywheel diagnostic system for high rotational speed applications such as locomotive drivetrain energy storage. The proposed diagnostic system will combine composite flywheel strength and fatigue models developed by SatCon Technology Corp. with innovative sensor and data processing technology developed ...

    SBIR Phase I 1996 Department of Transportation
  10. TRANSIT INFORMATION DECISION SUPPORT ENVIRONMENT REQUIREMENTS STUDY

    SBC: Viggen Corp.on            Topic: N/A

    THE USE OF POWERFUL GIS AND DECISION SUPPORT TOOLS WILL AID TRANSIT PROFESSIONALS IN PROVIDING BETTER SERVICES AND MAKING INFORMED DECISIONS. HOWEVER, THE LACK OF INTEGRATION BETWEEN MULTIPLE DATA SOURCES AND TRANSIT SOFTWARE TOOLS WITH GIS PREVENTS TRANSIT FROM FULLY DEMONSTRATING THE SYNERGY THAT IS ACHIEVABLE BY GIS AND FURTHER DELAYS ADOPTION AND WIDE-SPREAD USE OF GIS IN TRANSIT AGENCIES. THE ...

    SBIR Phase II 1996 Department of Transportation
US Flag An Official Website of the United States Government