You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Acoustic, Thermal and Fire Insulation System

    SBC: TECH 21, LLC            Topic: N04221

    To provide low-cost, light-weight, cost-effective insulation system that combines an improved acoustic performance in excess of 40-60 dB with the required thermal, smoke, toxicity and fire barrier performance using mature coating technologies. Our team of acoustic and thermal experts will demonstrate in Phase II that our coating system will exceed the standard acoustic properties of transmission ...

    SBIR Phase II 2008 Department of DefenseNavy
  2. Low-Cost, Eye Limiting Resolution, Immersive Display

    SBC: ADVANCED SIMULATION DISPLAYS CO.            Topic: N07029

    The continued advance of flat panel display technology in the commercial and consumer display industry offers the opportunity to provide wide field of view high resolution displays to the flight simulation community with significantly higher performance and lower cost than previously available. These flat panel displays offer exceptional brightness and contrast and steadily increasing resolution ...

    SBIR Phase II 2008 Department of DefenseNavy
  3. Noise and Artifact Reduction in Computed Tomography (CT) Images

    SBC: JDLL, INC.            Topic: AF05203

    Current high-energy computed tomography (CT) techniques for nondestructive testing (NDT) of solid rocket motors (SRM) and other large industrial objects often produce inferior imagery due to artifacts, impairing detection, identification, and measurement of anomalies. Phase I results verified that these artifacts arise from failure of assumptions implicit in the filtered backprojection algorithm. ...

    SBIR Phase II 2008 Department of DefenseAir Force
  4. Novel High Temperature Geopolymer for Spall-resistant Pavement Materials

    SBC: Sommer Materials Research, Inc.            Topic: AF071108

    During the last two decades, there has been considerable interest and research in inorganic polymers (“geopolymers”) for high-temperature applications. Geopolymers are manufactured by combining aluminosilicate powders with activating liquids through a polycondensation reaction. The resulting cured geopolymer can exhibit high compressive strengths after only four hours of set time. Geopolyme ...

    SBIR Phase II 2008 Department of DefenseAir Force
  5. Ceramic Matrix Composite (CMC) Structures for Vanes and Exhaust Nozzle Components

    SBC: EVISIVE LLC            Topic: AF071105

    The objective of this project is to optimize the design of a microwave interference scanning system and application procedure for use in the Ceramic Matrix Composite (CMC) manufacturing process. Quick, efficient in-process measurement of part porosity will be an integral part of pyrolysis cycle optimization. The feasibility of this application of the novel Evisive Scan microwave interference sca ...

    SBIR Phase II 2008 Department of DefenseAir Force
  6. W-band Microwave Amplifier Power Module

    SBC: INNOSYS, INC.            Topic: AF063001

    InnoSys proposes the advanced development of microwave power modules (MPMs) that combine monolithic microwave integrated circuit (MMIC) driver amplifiers with miniature traveling wave tube (TWT) amplifiers. This provides high power density at low cost and a small size and weight. When used as a driver amplifier in the MPM, the V/W band MMIC provides sufficient power and gain to drive the special ...

    SBIR Phase II 2008 Department of DefenseAir Force
  7. Development of Lightweight and Compact Air-Independent Planar SOFC for Navy's Undersea Applications

    SBC: Materials and Systems Research, Inc.            Topic: OSD05MT8

    The overall objective of the Phase II effort is to demonstrate a solid oxide fuel cell stack to power unmanned undersea vehicles (UUVs). We will use established and proven solid oxide fuel cell (SOFC) technology developed at MSRI to achieve this objective. Based on the success of Phase-I effort, a scaled-up stack of 1~3 kW size with peak power of ~6 kW will be demonstrated. The stacks will be o ...

    SBIR Phase II 2008 Department of DefenseNavy
  8. High Speed Light Weight Omnidirectional Vehicle with Enhanced Manipulator Control

    SBC: AUTONOMOUS SOLUTIONS INC            Topic: A06216

    There is an urgent need for a man-transportable EOD robot which can quickly traverse the distance between its operator and the suspected UXO, perform manipulation tasks requiring high dexterity, and then quickly return. This proposal describes an innovative solution to this need called ‘Taz’. Taz will weigh 40 kg, be capable of 40 kph for up to 8 hours, and will offer high dexterity manipulati ...

    SBIR Phase II 2008 Department of DefenseArmy
  9. Collaborative Engagement with Unmanned Systems

    SBC: PROCERUS TECHNOLOGIES LC            Topic: A06052

    Procerus Technologies and Renaissance Sciences are teaming together to provide critical technologies for collaborative engagement of ground targets by platoons of unmanned systems (UMS). We have developed a cooperative control strategy for platoons of UMS with specific focus on unmanned air vehicles (UAVs). Using this strategy we have demonstrated, using hardware-in-the-loop simulation, the abil ...

    SBIR Phase II 2008 Department of DefenseArmy
  10. A Distributed Portal and Virtual Testbed for ATR/Fusion Algorithms

    SBC: COGNITECH CORPORATION            Topic: N/A

    This project will create a distributed portal and virtual testbed for ATR/Fusion algorithms. The investigators will develop a CORBA architecture and software tools to support profiling of distributed software processes, workflow task management, andinterfaces to algorithm and performance measure repositories. The investigators will design and create databases for algorithm inputs, algorithm outp ...

    SBIR Phase II 2001 Department of DefenseAir Force
US Flag An Official Website of the United States Government