Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. DEVELOPMENT OF A NOVEL TRANSMISSION FOR HELICOPTER APPLICATIONS

    SBC: VISHWA ROBOTICS AND AUTOMATION LLC            Topic: A16018

    US Army utilizes a wide range of vehicles across ground and air platforms where mechanical transmissions are used to transmit power from the engine to the drive shaft. Gears are used to create a torque and speed conversion with mechanical contact between the gear teeth surfaces. Lubrication is necessary to create a protective film between rolling and sliding surfaces as well as provide sufficient ...

    SBIR Phase II 2019 Department of DefenseArmy
  2. Signal Processing at Radio Frequency (RF) for Position Navigation & Timing Co-Site Interference

    SBC: Metamagnetics Inc.            Topic: A17039

    Numerous operations in an increasingly congested electromagnetic spectrum, intensify demand for data at the tactical edge, and the diminishing extent of electromagnetic spectrum provisioned for the military has resulted in the need for advanced technologies to mitigate Global Positioning System (GPS) interference due to co-site interference and C4ISR. Metamagnetics proposes a powerful and adaptabl ...

    SBIR Phase II 2019 Department of DefenseArmy
  3. CMOS Compatible Deposition of Multi-Ferroic Films for Tunable Microwave Applications

    SBC: Winchester Technologies, LLC            Topic: A17019

    Built upon the progress in Phase I period, Winchester Technologies, LLC proposes to investigate practical magnetoelectric antennas during the Phase II period for different applications. State of the art antennas suffer from three major open challenges: (1) large antenna size, (2) antenna impedance mismatch; (3) ground plane effect. This is because state of the art antennas are based on oscillating ...

    SBIR Phase II 2019 Department of DefenseArmy
  4. Vascularized Tissue Construction Using Specialized 3D Bioprinting Techniques

    SBC: Lynntech Inc.            Topic: A17068

    Tissue engineering technology is of particular import to the Army for the matter of producing tissue replacements for the repair and regeneration of various organ systems (liver, heart, muscle, lung, etc.) for wounded patients. Unfortunately, the production of masses of tissue with thicknesses greater than ~1 mm presents a challenge due to diffusion limits of nutrients into the tissue and waste ou ...

    SBIR Phase II 2019 Department of DefenseArmy
  5. Biologically-Derived Targeted Antifungals for Textile Applications

    SBC: Antimicrobial Materials, Inc.            Topic: A17018

    Fungal skin infections plague active duty servicemembers at elevated rates due to exposure to warm, humid climates, poor skin hygiene, and close-quarters living arrangements. We have developed a novel solution that incorporates an endophytic fungal extract with selective activity against Trichophyton species of pathogens. In addition, the selected compound has negligible impact on the organisms th ...

    SBIR Phase II 2019 Department of DefenseArmy
  6. FTL's FASCI, Forward Area Suspended Contaminant Identifier, Field Instrumentation to measure, quantify, and characterize fuel contaminants

    SBC: FTL Labs Corporation            Topic: A17116

    To avoid machine failure, diesel engine hardware manufacturers recommend limiting fuel contamination particles based on number and size distribution. Work performed by TARDEC has developed limits for particulate and free water contamination in fuel utilizing light obscuration particle counting; however, this approach is unable to differentiate between solid particulates, free water droplets, and a ...

    SBIR Phase II 2019 Department of DefenseArmy
  7. High Performance, Insensitive Munition Compliant, Structural Combustible Cartridge Case for Ammunitions

    SBC: Physical Sciences Inc.            Topic: A18013

    Physical Sciences Inc. proposes to demonstrate and quantify a unique high performance, insensitive munition compliant, structural combustible cartridge case for ammunitions that would significantly augment the ballistic performance. This new formulation will increase the ballistic energy, impetus, and muzzle velocity, while simultaneously eliminating combustion residue and providing insensitivity ...

    SBIR Phase I 2019 Department of DefenseArmy
  8. Micro-templated electrochemical formation of composite obscurant disks

    SBC: Physical Sciences Inc.            Topic: A18056

    Physical Sciences, Inc. (PSI) will develop bi-spectral obscurant materials with tight dimensional control and properties that promote good pyrotechnic or pneumatic dissemination.In response to the Army requirement, PSI has fabricated copper disks with a diameter of 3 microns and controllable nanoscale thickness.During the proposed program PSI, will scale-up the fabrication of the copper disks, inc ...

    SBIR Phase I 2019 Department of DefenseArmy
  9. Autonomous Rugged Combat Casualty CareIntervention (ARC3-I)

    SBC: Charles River Analytics, Inc.            Topic: A18064

    In the near future, the Warfighter may face prolonged isolation and sustained denial of support on the battlefield, and may have no access to medical support. To become more resilient to these challenges, the Warfighter will need additional, innovative support to provide Tactical Combat Casualty Care (TCCC). Intelligent decision-support software, teleoperated trauma care systems, and fully autonom ...

    SBIR Phase I 2019 Department of DefenseArmy
  10. Recoverable Elastic-Plastic Lattice for SUAS Impact Protection

    SBC: Triton Systems, Inc.            Topic: A18075

    Triton Systems Inc. will develop a modular and easily installed impact protection system for small unmanned aerial systems (SUAS), comprising a lattice array of pultruded S-2 Glass composite rods affixed to the SUAS body through socket retainers bonded to the SUAS.The rods will be formed into a cage providing sufficient stiffness and standoff to prevent damage to the SUAS under anticipated impact ...

    SBIR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government