You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. A Water Vapor Trap for Measuring Cumulative Humidity Exposure

    SBC: CREARE LLC            Topic: N112087

    The advanced properties achieved by modern ceramic matrix composite (CMC) structures depend critically on the surface condition of reinforcement materials used in the manufacturing process. Contamination of reinforcement surfaces can result in brittle phases, low melting point eutectics, or foreign compounds at the critical interface between the reinforcement material and the ceramic matrix, which ...

    SBIR Phase I 2012 Department of DefenseNavy
  2. Novel Sensor for Real-Time Particle Loading Measurements in Operational Gas-Turbine Engines

    SBC: CREARE LLC            Topic: N112088

    Sand and dust ingestion can be a significant issue for military aircraft operating in desert environments. For gas-turbine engines, ingested sand erodes engine components such as turbine blades, accelerating engine wear. Currently, no operational systems exist for tracking sand and dust loading in gas-turbine engines. We propose to develop an Optical Particle Counting, Sizing, and Composition (OPC ...

    SBIR Phase I 2012 Department of DefenseNavy
  3. Lightweight Electromagnetic Interference (EMI) Shielding System for Aircraft Avionics

    SBC: Nanocomp Technologies Inc.            Topic: N112097

    A key technology enabler for next generation EMI shielding applications is low loss, lightweight, flexible, conductive carbon nanotube (CNT) tape. The primary goal of this effort is to determine the optimal geometry for a CNT based EMI shield to provide equivalent shielding effectiveness of cable harnesses and other electronics on the V-22 Osprey, while maintaining a maximum weight savings. The ap ...

    SBIR Phase I 2012 Department of DefenseNavy
  4. A Low Cost Electromagnetic Induction Ground Fault Detector

    SBC: CREARE LLC            Topic: N112133

    Cabling faults can be difficult to identify and locate when a large number of interconnections are used such as in the shipboard Machinery Control System. Ungrounded systems further complicate diagnosis, since signal voltages and currents are small amplitude. It often takes a considerable amount of time to identify and locate the fault, and the equipment capability can be substantially reduced whi ...

    SBIR Phase I 2012 Department of DefenseNavy
  5. High Friction, Conforming Boat Capture and Transfer System

    SBC: C3I, Inc            Topic: N112135

    The boat transfer, launch, and recovery system proposed will utilize a system of composite moving ways, cradle, and configurable bouyant bladders, controlled by the Advanced Communication and Control System (ACCS) to safely launch, recover, and transfer a variety of boats ranging in size as a minimum, from 7 M to 11 M, with a variety of hull shapes and materials, including unmanned surface vessels ...

    SBIR Phase I 2012 Department of DefenseNavy
  6. An Advanced Flame Test Manikin

    SBC: CREARE LLC            Topic: N112143

    Instrumented manikins are used to assess the risks of burn injuries and evaluate the ability of clothing and other protective equipment to mitigate the injury potential during compartment or flash fires or other thermal threats. Recent data indicate that fabric stresses due to body motion are important in determining whether the clothing will break open and expose the skin to significant burn inju ...

    SBIR Phase I 2012 Department of DefenseNavy
  7. Reactant Delivery System for Underwater Vehicles

    SBC: CREARE LLC            Topic: N112155

    Advanced underwater vehicles (unmanned underwater vehicles (UUVs), torpedoes, etc.) are key to achieving long-term objectives for undersea force projection and surveillance. Existing battery-based power systems for these vehicles do not meet mission requirements due to low energy density, prohibitive cost, and/or time-consuming maintenance. Power systems based on liquid fuels and oxidizers (collec ...

    SBIR Phase I 2012 Department of DefenseNavy
  8. A Power Dense Modular Capacitor Charging Converter for Pulsed Power

    SBC: CREARE LLC            Topic: N113181

    Industrial medium-voltage capacitor charging converters are currently limited in applicability for future Electromagnetic Rail Gun (EMRG) systems by low-power density, undesirable charging profiles, and incompatibility with shipboard DC voltages, liquid cooling, EMI, shock, and vibration requirements. A need exists to provide improved medium-voltage, power dense, and modular electronics to meet th ...

    SBIR Phase I 2012 Department of DefenseNavy
  9. High-Temperature Superconducting Tape Connection System

    SBC: CREARE LLC            Topic: N121049

    A method is needed to rapidly and reliably make low-resistance connections between high-temperature superconducting (HTS) tapes. These tapes are used in cables for Navy degaussing and power distribution systems. Superconducting cables are smaller, lighter, and more efficient than the copper cables used in legacy systems. However, there is no simple method for making tape connections in the field, ...

    SBIR Phase I 2012 Department of DefenseNavy
  10. A Nanophosphate Lithium-ion Chemistry Source for Crossover Power Sources

    SBC: CREARE LLC            Topic: N121067

    The MK-48 torpedo requires a temporary crossover power supply until main engine activation and alternator power becomes available. Due to the low energy density, high cost, and deteriorating availability of presently used thermal batteries, a suitable replacement power source using innovative energy storage concepts is desired. Creare proposes to develop an innovative high density power source bas ...

    SBIR Phase I 2012 Department of DefenseNavy
US Flag An Official Website of the United States Government