List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Miniature Infant Cognitive and Language Assessment System

    SBC: CLEVELAND MEDICAL DEVICES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Education
  2. Voice Processing Technology for Real-Time Speech-to-Text Conversion Applications

    SBC: Horizon Technologies Dev.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Education
  3. The Use of Recycled Solid Automotive Paint Wastes as Ingredients in Automotive Sealant Products

    SBC: Aster Inc.            Topic: N/A

    About 75,000,000 lbs of paint sludge is generated by the U.S. automotive industry each year. This type of waste and (similar streams from other industries) make significant contributions to landfills. The solution proposed by ASTER, Inc., proven feasible during the Phase I of this work, is to recycle the paint sludge into ingredients for automotive sealants. This new approach results in waste g ...

    SBIR Phase II 1995 Environmental Protection Agency
  4. Novel Process for Functional Chromium Plating from Non-Toxic Trivalent Chromium (Cr(III)) Plating Bath

    SBC: Faraday Technology, Inc.            Topic: N/A

    Chromium coatings are widely used in various industries. Functional chromium is currently plated from a Cr(VI) bath. However, Cr(VI) is identified as one of 17 "high-priority" toxic chemicals by the EPA. Compared to Cr(VI), Cr(III) is environmentally benign and the waste disposal cost is significantly reduced. However, functional chromium coatings are not currently available from a Cr(III) bat ...

    SBIR Phase II 1995 Environmental Protection Agency
  5. ELECTROPLATING FROM ADDITIVE-FREE ELECTROLYTES

    SBC: Faraday Technology, Inc.            Topic: N/A

    Faraday Technology, Inc. proposes to develop an electroplating process fromadditive-free bath for the printed wiring board (PWB) industry and metal platingindustry. Current state-of-the-art metal plating relies on baths containingproprietary additive. These additives were developed empirically and consist ofbrighteners, levelers, and surfactants. These additives affect the platingprocess to yie ...

    SBIR Phase I 1995 Environmental Protection Agency
  6. HIGH EFFICIENCY ELECTROCHEMICAL TREATMENT OF GROUNDWATER CONTAMINATED WITH HEAVY METALS

    SBC: Faraday Technology, Inc.            Topic: N/A

    This SBIR Phase I project will demonstrate the feasibility of an innovativeelectrochemical process for high efficiency simultaneous recovery of mixed heavymetals from contaminated groundwater. Electrochemical recovery of metals fromwastewater is a promising approach for metal recycle. However, the conventionalelectro-chemical method is not efficient to treat dilute wastewater.Additionally, when ...

    SBIR Phase I 1995 Environmental Protection Agency
  7. IN-SITU REMOVAL OF HEAVY METALS FROM VADOSE ZONE CONTAMINATED SOILS USING ENHANCED ELECTROKINETICS

    SBC: Faraday Technology, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Environmental Protection Agency
  8. IN-PROCESS RECYCLING OF PLATING WASTES

    SBC: Faraday Technology, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Environmental Protection Agency
  9. A FLUOROMETRIC SENSOR FOR Cr(VI)

    SBC: MARKTEK INC            Topic: N/A

    Hexavalent chromium, Cr(VI), in the usual form of oxo species, is used in manyindustrial processes and products. As a consequence, Cr(VI)= containingcompounds are often found in wastewater and contaminated sites. Since Cr(VI) isconsidered highly toxic and carcinogenic, it is extremely important to have areliable, easy-to-use, sensitive monitor for determining Cr(VI) concentrationsin process, on ...

    SBIR Phase I 1995 Environmental Protection Agency
  10. Innovative Volatile Heavy-Metal Air-Toxics Control

    SBC: Sorbent Technologies Corp            Topic: N/A

    The emission of mercury into the atmosphere from combustion sources has increasingly become a major environmental and health concern. The recent Clean Air Act Amendments have called for close scrutiny and possible limits on mercury emissions. Unfortunately, because it is in the form of a vapor or submicron aerosol in gas streams, elemental mercury has proven very difficult and expensive to contr ...

    SBIR Phase II 1995 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government