You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  2. Coordination of Heterogeneous Robot Swarms for Planetary Logistics Operations

    SBC: VECNA TECHNOLOGIES, INC            Topic: T4

    Swarm robotics is one of the key enabling technologies for significantly extending mankind's reach beyond the Earth's surface. However, when bringing theory to practice, challenging problems related to the coordination and control of these swarms quickly arise. Vecna Robotics proposes a collaboration with MIT to extend existing autonomy behaviors and test platforms to address a class of pl ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  3. A Supported Liquid Membrane System for Steady State CO2 Control in a Spacecraft Cabin

    SBC: REACTION SYSTEMS, INC.            Topic: T6

    Reducing the allowable concentration of carbon dioxide (CO2) in spacecraft is a critical need for NASA. The system now used on the International Space Station (ISS) is the carbon dioxide removal assembly (CDRA). While it has performed well on the ISS, managers have concluded that using the device to reach the new ppCO2 limit of 2.0 mm Hg is not practical and a new method is needed.In this projec ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  4. Extensible Modeling to Create Knowledgebase for AM Processing of Alloy GrCop-84

    SBC: APPLIED OPTIMIZATION, INC.            Topic: T12

    The research objective of the proposed work is to demonstrate feasibility of utilizing extensible modeling to create an AM knowledgebase for copper alloy, GrCop-84, and utilize it to design an AM process for GrCop-84. The work plan has three tasks: (1) Utilize process modeling to demonstrate feasibility of predicting AM process parameters for alloy GrCop-84 for the powder bed and blown powder proc ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. Aeroservoelastic Multifidelity Design of Biomimetic Aircraft (AMuBA)

    SBC: Intelligent Automation, Inc.            Topic: T15

    NASA has been investigating morphing aircraft for multi-mission capabilities and performance improvements in existing fixed-wing aircraft. In addition, the design of aeroelastic aircraft that can control the structural flexibility to their advantage, is an open area of research and development. In spite of the plethora of work on morphing aircraft and long slender wings, the goal of fielding such ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  6. Sentient Science- A Multiscale Modeling Suite for Process and Microstructure Prediction in Metal Additive Manufacturing

    SBC: SENTIENT SCIENCE CORPORATION            Topic: T12

    In response to NASA’s topic T12.02 of “Extensible Modeling of Metallurgical Additive Manufacturing Processes”, Sentient proposes to incorporate its DigitalClone technique to develop a multiscale and multiphysics computational modeling suite to predict comprehensive outcomes from AM building processes, including geometrical accuracy, and resulting microstructure and defects. Figure 1 shows th ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  7. Femtosecond-Laser Fabrication of Waveguides in Laser Materials

    SBC: AKTIWAVE LLC            Topic: T8

    This proposal includes, for the first time, integrated theoretical models and experimental investigations to simulate and demonstrate femtosecond-laser-fabricated waveguides in crystalline dielectric materials. The numerical models will predict refractive-index changes potentially induced by self-focusing, heat accumulation, thermal stress, plasma formation and relaxation, and ablation. The influe ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  8. Validated Engineering Tools for Thin-Ply Composites

    SBC: OPTERUS RESEARCH AND DEVELOPMENT, INC            Topic: T12

    Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. Engineering and Qualification of Thin-Ply Composites

    SBC: Roccor, LLC            Topic: T12

    This body of research focuses on developing fundamental engineering qualification methods for Thin-Ply High Strain Composites (TP-HSCs). Roccor will collaborate with NASA and Dr. Kwok of the University of Central Florida to develop and validate a robust framework for engineering the viscoelastic behavior of highly strained thin-ply composites. The material systems studied will be highly focused on ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. DSM Autonomy System

    SBC: EMERGENT SPACE TECHNOLOGIES, INC.            Topic: T11

    Increasing the level of spacecraft autonomy for any future space mission will make it more affordable and capable, allowing NASA to do more science with less operations costs. For future Distributed Space Missions (DSMs) however, spacecraft autonomy is critical to reducing costs to make the missions affordable and practical. The use of multiple satellites to simultaneously sample science observati ...

    STTR Phase II 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government