Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Ultrafast Physical Random Number Generation Using Chaos

    SBC: Torch Technologies, Inc.            Topic: A14AT002

    Random numbers are essential for a growing number of modern applications. As computer speed and communications bandwidth have increased the potential for practical streaming cipher and large-scale Monte Carlo simulations have become technologically feasible. For these and other applications, ultrafast random number generators are essential. This is intuitively clear. Additionally, however, the ide ...

    STTR Phase II 2016 Department of DefenseArmy
  2. System of Systems Control Interactions

    SBC: Torch Technologies, Inc.            Topic: MDA15T002

    Control Theory tools and processes for analyzing the interactions of complex System of Systems (SoS) are lacking, specifically when sub-systems are independently designed and/or higher levels of SoS controls are applied. Integrating these sub-systems into the SoS, can result in dynamic interactions between these sub-systems and the SoS controls resulting in unexpectedly large deviations between ex ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  3. System of Systems Control Interactions

    SBC: GTD Unlimited LLC            Topic: MDA15T002

    In this research effort, GTD Unlimited will design tools for efficiently specifying, representing, and analyzing the interactions between control systems in System of Systems (SoS). Our approach will be to model the problem as an uncertain system and analyze the resulting models using control methods. Control methods can be related back to the standard Nyquist criterion for stability, ensuring t ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  4. Reverberation Mitigation of Speech

    SBC: Minerva Systems & Technologies, LLC            Topic: AF15AT17

    Automatic speech recognition (ASR) technology is in wide use today and has been successfully integrated into a number of applications. Although there are also many potential applications for automatic speaker identification (SID), SID accuracy rates are generally not sufficient for widespread use in practical applications. For high accuracy ASR and SID, the microphone must be located near the talk ...

    STTR Phase II 2016 Department of DefenseAir Force
  5. Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation

    SBC: VEXTEC CORPORATION            Topic: N16AT004

    The Phase I objective is a proof of concept capability integrating process information, material properties and damage tolerance simulations into the Additive Manufacturing (AM) design certification process. VEXTEC has a toolbox of software and methods that consists of various software modules in multiple formats that are used to assess the durability of parts processed by traditional methods of c ...

    STTR Phase I 2016 Department of DefenseNavy
  6. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for the creation of a common streaming model for 3D data that is agnostic to the display technology. To address this need, Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) propose to form a c...

    STTR Phase I 2016 Department of DefenseAir Force
  7. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications.

    SBC: Oceanit Laboratories, Inc.            Topic: N16AT008

    Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.

    STTR Phase I 2016 Department of DefenseNavy
  8. Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance

    SBC: CFD Research Corporation            Topic: MDA14T002

    Thermally induced fatigue and residual stress introduced during fabrication are sources of failure in microelectronics, which raises reliability concerns for MDA and its system integrators. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a physics based modeling and testing protocol to correlate material properties and thermal loading conditions to stress ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  9. Macromolecule Crystallization Screening Results Analysis

    SBC: IXPRESSGENES, INC.            Topic: 100

    Project Summary Crystallization followed by subsequent structure determination is a major step in understanding the structure function relationship of macromolecules Understanding macromolecule structure has become a key part in the development of new pharmaceuticals and is a major area of NIH research Crystallization however is also the rate limiting step despite technological efforts to a ...

    STTR Phase II 2016 Department of Health and Human ServicesNational Institutes of Health
  10. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government