You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Enabling point of care molecular diagnostics by developing an adaptive PCR instrument and on demand kit reagents

    SBC: BIOVENTURES, INC            Topic: 172

    Because of its high sensitivity polymerase chain reaction PCR is the gold standard for the diagnosis of many infectious diseases but generally only implemented in well equipped laboratories One of the major roadblocks for expanding PCR to point of care markets is the lack of simple robust single tube PCR designs which preserve its laboratory based high sensitivity and specificity In this F ...

    STTR Phase I 2017 Department of Health and Human ServicesNational Institutes of Health
  2. Osteopontin targeted therapy for primary CNS lymphoma

    SBC: MODULATION THERAPEUTICS, INC.            Topic: 102

    Abstract Primary central nervous system lymphoma PCNSL is an aggressive brain tumor with a dire unmet therapeutic need It has an overall incidence of per person years and is regarded as an orphan disease with potential for fast track approval Our group made a discovery via gene expression analysis that osteopontin OPN is the most upregulated gene in PCNSL compared to its non CNS ...

    STTR Phase I 2017 Department of Health and Human ServicesNational Institutes of Health
  3. Enabling point-of-care molecular diagnostics by developing an adaptive PCR instrument and on-demand kit reagents

    SBC: BIOVENTURES, INC            Topic: 172

    Because of its high sensitivitypolymerase chain reactionPCRis the gold standard for the diagnosis of many infectious diseasesbut generally only implemented in well equipped laboratoriesOne of the major roadblocks for expanding PCR to point of care markets is the lack of simplerobustsingle tube PCR designs which preserve its laboratory based high sensitivity and specificityIn this Fast Track STTR a ...

    STTR Phase II 2017 Department of Health and Human ServicesNational Institutes of Health
  4. Functional Additive Manufacturing for Printable & Networkable Sensors to Detect Energetics and Other Threat Materials

    SBC: DeLUX Engineering, LLC            Topic: A17AT004

    Chemiresistors are an important class of electronic sensors that detect the presence of analytes/chemicals via a change in the resistance of a sensor element. A typical interdigitated electrode array is deposited onto an insulating substrate with metallic electrodes that have feature sizes in the 5-500 m range. The metal electrodes are typically sputter coated onto the substrate, using lithogra ...

    STTR Phase I 2017 Department of DefenseArmy
  5. Instant k-Space Tomography for Spatial-Spectral Monitoring

    SBC: Phase Sensitive Innovations, Inc.            Topic: AF17AT013

    The Army is frequently forced to operate in hostile climates. Heavy fog, rain, snow, and dust storms can inhibit the performance of tracking technologies such as mid-wave infrared cameras. In such conditions, Army early warning systems are blinded and put personnel and assets at risk. There is a specific need for a degraded visual environment (DVE) penetrative target tracking solution. Radio fre ...

    STTR Phase I 2017 Department of DefenseAir Force
  6. Efficient Arrays for Generating Light Emission (EAGLE)

    SBC: Chip Design Systems LLC            Topic: AF16AT22

    With today's IRLED devices, >99.4% of input electrical power is converted into parasitic/waste heat. Moreover, as the local temperatures of the pixels increase due to the generated heat, IRLED optical efficiency is further reduced. Overall this severely limits the number and intensity of array pixels that can be simultaneously operated at high apparent temperatures. In Phase 2, we focus on develop ...

    STTR Phase II 2017 Department of DefenseAir Force
  7. Freeze Casting of Tubular Sulfur Tolerant Materials for Solid Oxide Fuel Cells

    SBC: Millennitek, LLC            Topic: A14AT011

    Solid oxide fuel cells have long suffered from degradation due to impurities in the fuel and complexities associated with dissimilar materials and high operating temperatures.This degradation lowers the usable cell power output and requires ancillary equipment for fuel sulfur removal and reformation.A unique microstructure for the tubular anode will be produced using a novel freeze-casting techniq ...

    STTR Phase II 2017 Department of DefenseArmy
  8. Wafer-Level Electronic-Photonic Co-Packaging

    SBC: Phase Sensitive Innovations, Inc.            Topic: AF16AT01

    In this STTR effort we will develop key packaging techniques for wafer-level hybrid electrical-optical co-packaging based on silicon photonic platform. These techniques include packaging LiNbO3 modulator on insulator (LNOI), high-speed modified uni-traveling carrier (MUTC) photodiodes packaging and high-efficiency fiber coupling. Silicon is the desired host material for photonic integrated circuit ...

    STTR Phase I 2017 Department of DefenseAir Force
  9. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for a display agnostic common streaming model for 3D data. Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) have formed a consortium to define a 3D streaming model based on open standards for Display Agnostic 3D Streaming (DA3DS). Two factors are driving this need. The first is the dramatic increase in the collection, storage and trans ...

    STTR Phase II 2017 Department of DefenseAir Force
  10. Novel Multi-scale/Multi-physics Integrated Tool for the Prediction of Manufacturing-Induced Defects in Autoclave Composite Airframe Parts

    SBC: Composites Automation LLC            Topic: N15AT003

    A multi-scale/multi-physics software tool will be developed to predict manufacturing-induced defects, specifically void evolution during composites manufacturing, due to materials, parts, tooling and process parameters. Appropriately modeling the manufacturing process to identify potential problem areas will enable process optimization to produce structural components without defects. Specifically ...

    STTR Phase II 2017 Department of DefenseNavy
US Flag An Official Website of the United States Government