You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Enabling point of care molecular diagnostics by developing an adaptive PCR instrument and on demand kit reagents

    SBC: BIOVENTURES, INC            Topic: 172

    Because of its high sensitivity polymerase chain reaction PCR is the gold standard for the diagnosis of many infectious diseases but generally only implemented in well equipped laboratories One of the major roadblocks for expanding PCR to point of care markets is the lack of simple robust single tube PCR designs which preserve its laboratory based high sensitivity and specificity In this F ...

    STTR Phase I 2017 Department of Health and Human ServicesNational Institutes of Health
  2. Biocatalytic production of precursors to lutein and zeaxanthin to address age related macular degeneration

    SBC: EscaZyme Biochemicals, LLC            Topic: N

    Project Summary Atrophic dry age related macular degeneration AMD is the leading cause of severe loss of vision for those over age Dietary supplements containing lutein and zeaxanthin are recommended by the NEI for those at risk of late AMD There has been a corresponding growth in demand for these two xanthophylls Lutein and zeaxanthin are currently sourced from marigolds grown mostl ...

    STTR Phase I 2017 Department of Health and Human ServicesNational Institutes of Health
  3. Enabling point-of-care molecular diagnostics by developing an adaptive PCR instrument and on-demand kit reagents

    SBC: BIOVENTURES, INC            Topic: 172

    Because of its high sensitivitypolymerase chain reactionPCRis the gold standard for the diagnosis of many infectious diseasesbut generally only implemented in well equipped laboratoriesOne of the major roadblocks for expanding PCR to point of care markets is the lack of simplerobustsingle tube PCR designs which preserve its laboratory based high sensitivity and specificityIn this Fast Track STTR a ...

    STTR Phase II 2017 Department of Health and Human ServicesNational Institutes of Health
  4. Freeze Casting of Tubular Sulfur Tolerant Materials for Solid Oxide Fuel Cells

    SBC: Millennitek, LLC            Topic: A14AT011

    Solid oxide fuel cells have long suffered from degradation due to impurities in the fuel and complexities associated with dissimilar materials and high operating temperatures.This degradation lowers the usable cell power output and requires ancillary equipment for fuel sulfur removal and reformation.A unique microstructure for the tubular anode will be produced using a novel freeze-casting techniq ...

    STTR Phase II 2017 Department of DefenseArmy
  5. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for a display agnostic common streaming model for 3D data. Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) have formed a consortium to define a 3D streaming model based on open standards for Display Agnostic 3D Streaming (DA3DS). Two factors are driving this need. The first is the dramatic increase in the collection, storage and trans ...

    STTR Phase II 2017 Department of DefenseAir Force
  6. Reduced Cost, Repeatable, Improved Property Washout Tooling for Composite Fabrication

    SBC: Nevada Composites, Inc.            Topic: N16AT015

    Nevada Composites has developed Green-Aero(sm) toolinglightweight ceramic tooling that is stable under high pressure and long-duration cure cycles and can be washed out with water after cures to 370C (700F). Tools, whether single-sided or washout, have a composite-compatible CTE, provide tight tolerances, are reproducible, are stable to storage under ambient conditions, and are of affordable cost. ...

    STTR Phase II 2017 Department of DefenseNavy
  7. Prediction and Measurement of the Soot Build-Up in Film-Cooled Rocket Engines

    SBC: JOHNSON ROCKETS            Topic: AF15AT21

    This Phase II STTR effort is focused on generating the data necessary to identify the phenomenology that produces carbon deposition within kerosene film cooled rocket engines.This data is essential to guide the model development and validation process.Program outputs will be both data and a physics-based model for carbon deposition.

    STTR Phase II 2017 Department of DefenseAir Force
  8. Adaptive Energy Absorbing Buffer for Reduced Wave Slam Energy

    SBC: ADVANCED MATERIALS AND DEVICES            Topic: N17AT014

    This Small Business Technology Transfer (STTR) Phase I effort will demonstrate the feasibility of a novel passively adaptive shock and vibration isolating buffer system for the US Navys combatant craft. The proposed approach does not rely on conventional passive, semi-active or active spring-damper systems. The buffer system will provide energy damping via a liquid spring buffer and eddy current d ...

    STTR Phase I 2017 Department of DefenseNavy
US Flag An Official Website of the United States Government