You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Enabling point of care molecular diagnostics by developing an adaptive PCR instrument and on demand kit reagents

    SBC: BIOVENTURES, INC            Topic: 172

    Because of its high sensitivity polymerase chain reaction PCR is the gold standard for the diagnosis of many infectious diseases but generally only implemented in well equipped laboratories One of the major roadblocks for expanding PCR to point of care markets is the lack of simple robust single tube PCR designs which preserve its laboratory based high sensitivity and specificity In this F ...

    STTR Phase I 2017 Department of Health and Human ServicesNational Institutes of Health
  2. Enabling point-of-care molecular diagnostics by developing an adaptive PCR instrument and on-demand kit reagents

    SBC: BIOVENTURES, INC            Topic: 172

    Because of its high sensitivitypolymerase chain reactionPCRis the gold standard for the diagnosis of many infectious diseasesbut generally only implemented in well equipped laboratoriesOne of the major roadblocks for expanding PCR to point of care markets is the lack of simplerobustsingle tube PCR designs which preserve its laboratory based high sensitivity and specificityIn this Fast Track STTR a ...

    STTR Phase II 2017 Department of Health and Human ServicesNational Institutes of Health
  3. Freeze Casting of Tubular Sulfur Tolerant Materials for Solid Oxide Fuel Cells

    SBC: Millennitek, LLC            Topic: A14AT011

    Solid oxide fuel cells have long suffered from degradation due to impurities in the fuel and complexities associated with dissimilar materials and high operating temperatures.This degradation lowers the usable cell power output and requires ancillary equipment for fuel sulfur removal and reformation.A unique microstructure for the tubular anode will be produced using a novel freeze-casting techniq ...

    STTR Phase II 2017 Department of DefenseArmy
  4. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for a display agnostic common streaming model for 3D data. Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) have formed a consortium to define a 3D streaming model based on open standards for Display Agnostic 3D Streaming (DA3DS). Two factors are driving this need. The first is the dramatic increase in the collection, storage and trans ...

    STTR Phase II 2017 Department of DefenseAir Force
  5. Physics Based Gear Health Prognosis via Modeling Coupled with Component Level Tests

    SBC: VEXTEC CORPORATION            Topic: N07T010

    PHM investments can successfully diagnose up to 70% of damage fault indications. The cost of empirically-based testing is very high and must be reworked for every gear system design change. Physics-based FEA combined with long crack modeling can be self-adapting and overcome the high cost of pure statistical approaches but still unable to diagnose the remaining 30% failures because onset of damage ...

    STTR Phase I 2007 Department of DefenseNavy
  6. Software for the Design and Certification of Unitized Airframe Components

    SBC: VEXTEC CORPORATION            Topic: AF05T015

    This SBIR Phase II will demonstrate the feasibility for a unitized component structural design tool that allows for holistic risk assessment. The analysis will transform the FEA predicted stress (or strain) state into fully probabilistic assessment of uncertainty in geometry and loading throughout the component. Thereafter the design tool will conduct probabilistic microstructural damage accumulat ...

    STTR Phase II 2007 Department of DefenseAir Force
US Flag An Official Website of the United States Government