You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Enabling point of care molecular diagnostics by developing an adaptive PCR instrument and on demand kit reagents

    SBC: BIOVENTURES, INC            Topic: 172

    Because of its high sensitivity polymerase chain reaction PCR is the gold standard for the diagnosis of many infectious diseases but generally only implemented in well equipped laboratories One of the major roadblocks for expanding PCR to point of care markets is the lack of simple robust single tube PCR designs which preserve its laboratory based high sensitivity and specificity In this F ...

    STTR Phase I 2017 Department of Health and Human ServicesNational Institutes of Health
  2. Enabling point-of-care molecular diagnostics by developing an adaptive PCR instrument and on-demand kit reagents

    SBC: BIOVENTURES, INC            Topic: 172

    Because of its high sensitivitypolymerase chain reactionPCRis the gold standard for the diagnosis of many infectious diseasesbut generally only implemented in well equipped laboratoriesOne of the major roadblocks for expanding PCR to point of care markets is the lack of simplerobustsingle tube PCR designs which preserve its laboratory based high sensitivity and specificityIn this Fast Track STTR a ...

    STTR Phase II 2017 Department of Health and Human ServicesNational Institutes of Health
  3. Freeze Casting of Tubular Sulfur Tolerant Materials for Solid Oxide Fuel Cells

    SBC: Millennitek, LLC            Topic: A14AT011

    Solid oxide fuel cells have long suffered from degradation due to impurities in the fuel and complexities associated with dissimilar materials and high operating temperatures.This degradation lowers the usable cell power output and requires ancillary equipment for fuel sulfur removal and reformation.A unique microstructure for the tubular anode will be produced using a novel freeze-casting techniq ...

    STTR Phase II 2017 Department of DefenseArmy
  4. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for a display agnostic common streaming model for 3D data. Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) have formed a consortium to define a 3D streaming model based on open standards for Display Agnostic 3D Streaming (DA3DS). Two factors are driving this need. The first is the dramatic increase in the collection, storage and trans ...

    STTR Phase II 2017 Department of DefenseAir Force
  5. Low Loss High Power Current Lead for Cryogenic Applications

    SBC: Tai-Yang Research Company            Topic: N10AT022

    The Tai-Yang Research Company, in partnership with the Center for Advanced Power Systems at Florida State University, proposes to develop a novel solution for reducing the high heat load at the warm-to-cold electrical terminations of a high temperature superconducting cable configured for Navy ship power distribution systems. The termination design will be constrained to meet unique Navy requireme ...

    STTR Phase I 2010 Department of DefenseNavy
  6. Development of Multidisciplinary, Multi-Fidelity Analysis and Integration of Aerospace Vehicles

    SBC: VEXTEC CORPORATION            Topic: AF08BT03

    ABSTRACT: Current aircraft design approaches incorporate the use of many high fidelity models for point solutions of individual disciplines. Sophisticated model integration techniques are not yet readily available and a significant amount of individual discipline “stovepiping” exists. Individual handoffs of point solutions between disciplines often results in repeated individual data interpre ...

    STTR Phase II 2010 Department of DefenseAir Force
  7. UCDS Unsteady Reaction Model

    SBC: Gloyer-Taylor Laboratories LLC            Topic: MDA09T009

    The UCDS process uses a rigorous theoretical model to understand the dynamics of combustion instability. In addition to predicting the amplitude of pressure oscillations, UCDS provides clear insight into why a propulsion device oscillates. To enhance and optimize UCDS for missile defense applications, GTL proposes to refine the UCDS unsteady combustion model to capture the special features of mon ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government