Award Data

The Phase I project showed that novel urethane-functional (NUF) resins could be produced that were free of isocyanates and very useful for one-component, ambient-cured (OCAC) coatings. Resins for OCAC coatings, which are expected to be valued at $5.7 billion by 2019, are used to produce a variety of coatings including oil-based paints, wood stains, varnishes, and aerosol paints._x000D_ Phase I re ...

Due to their exceptional properties, polyurethane coatings are used extensively in our society.Unfortunately, the socyanate-functional components used in the curing of polyurethanes are generally toxic. Thus, there is a need for polyurethane resins that can be cured without the use of isocyanate-functional components. In addition to enabling the production of polyurethane coatings that are free ...

The U.S. EPA Stage 2 Disinfectants and Disinfection Byproducts Rule (S2DDBR) requires potable water utilities to maintain total trihalomethane (TTHM) concentrations below 80µg/L at all locations within distribution systems beginning in 2012 due to adverse health-effect risks. Air stripping effectively volatilizes TTHMs due to their low Henry’s law constants. However, commercially available ai ...

This Small Business Innovation Research Phase I project will evaluate the feasibility of using titanium or vanadium based compounds as chemical conversion coatings for magnesium alloys. Magnesium alloys suffer from high corrosion rates and must be coated with either an anodized or chemical conversion coating to minimize corrosion. This idea is based on knowledge gained by Technology Applications ...

This SBIR Phase I project will evaluate the feasibility of using titanium- or vanadium-based compounds as chemical conversion coatings for magnesium alloys. Magnesium alloys suffer from high corrosion rates and must be coated with either an anodized or chemical conversion coating to minimize corrosion. This idea is based on knowledge gained by the Technology Applications Group, Inc. during the d ...

Expansion of a combined software and on-site training program for people with disabilities and their families who lack usual prerequisites fpr success in computer-based learning; expansion to result in empirically validated commercial product

The project combined software and an on-site training program for persons with disabilities and their families who lack the usual prerequisites for success in computer-based instruction created in Phase I into an empirically validated commercial product. The technical objectives of the project are: (1) the development of a unique virtual school house model to meet the identified needs of individ ...

Dakota Technologies, Inc. (DTI), has demonstrated successfully key technologies used in the operation of a miniature gas chromatograph (GC) that fits inside a push rod for field screening and quantification of subsurface volatile organic compounds (VOCs). The GC is soft-pushed (no percussion) into the earth and uses a heated microporous inlet membrane on the side of the probe to transfer VOCs from ...

N/A

N/A