You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Atomic Layer Deposition of PbZrxTi1-xO3 Thin Films for PiezoMEMS Applications
SBC: STRUCTURED MATERIALS INDUSTRIES, INC. Topic: A12aT020In this STTR program, Structured Materials Industries, Inc. (SMI) and partners will develop hardware and process technology to deposit uniform films of piezoelectric PbZrxTi1-xO3, on substrates with complex 3-dimensional topography. Piezoelectric PbZrxTi1-xO3 films are a critical technology for advanced Micro Electro Mechanical System (MEMS), to provide low power actuation in nanoscale devices. ...
STTR Phase II 2014 Department of DefenseArmy -
Autonomous Broad Spectrum Environmental Sentinels
SBC: NEVADA NANOTECH SYSTEMS, INC. Topic: A13AT017We propose a platform for aerial environmental monitoring based on the integration of two advanced technologies for the first time: a lightweight, flying robotic platform capable of hovering and swarming, and a compact, low-power chemical sensor platform called the Molecular Property Spectrometer (MPS): a robust, low-cost, silicon-chip-based micro-electro-mechanical system (MEMS) that has been use ...
STTR Phase I 2014 Department of DefenseArmy -
An Ultra-High Carbon Steel Bonded Tungsten Carbide Material for Armor Piercing Rounds
SBC: ADVANCED MATERIALS & DEVICES Topic: OSD12T07This Small Business Technology Transfer (STTR) Phase I effort will demonstrate the feasibility of an innovative tungsten carbide (WC) metal matrix composite for use as a non-carcinogenic penetrator for armor piercing (AP) munitions for small arms. The objectives of this effort are to: 1) Mechanically compact the WC and binder powders, 2) Sinter the compacted powders into a fully dense composite, 3 ...
STTR Phase I 2013 Department of DefenseArmy -
MOCVD of High Performance Complex Oxide Films for Switchable Film Bulk Acoustic Resonators
SBC: STRUCTURED MATERIALS INDUSTRIES, INC. Topic: A11aT016In this STTR program, Structured Materials Industries, Inc. (SMI) and partners are developing high efficiency, switchable RF filters. The technical approach is based on thin films of paraelectric BaxSr1-xTiO3 and SrTiO3, which can show piezoelectric behavior under an applied DC bias. When integrated into resonator structures, these materials can act as both an RF filter and an RF switch. Combin ...
STTR Phase II 2013 Department of DefenseArmy -
MEMS based thermopile infrared detector array for chemical and biological sensing
SBC: New Jersey Microsystems, Inc. Topic: A10aT004New Jersey Microsystems, Inc proposes to develop an economical thermopile array with sensitivity maximum in the long wave infrared region (LWIR). Current infrared detectors are too expensive to be widely deployed in large numbers. The proposed MEMS technology is simpler, more manufacturable, and therefore less expensive than existing bolometers and ferroelectric devices based on rare earth and ...
STTR Phase II 2013 Department of DefenseArmy -
Incremental Learning for Robot Sensing and Control
SBC: Net-Scale Technologies, Inc. Topic: A09AT030The purpose of this proposal is to build a working prototype of a highly-adaptive, vehicle-independent, compact, low-power, low-cost, autonomous ground robot navigation system that incorporates the results obtained in our Phase I effort and in our earlier DARPA LAGR (Learning Applied to Ground Robots) work. The system will be able to quickly and automatically adapt to changing environments in real ...
STTR Phase II 2013 Department of DefenseArmy