You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Launch Weather Decision Support System

    SBC: Radiometrics Corporation            Topic: T1

    NASA wants a cost-effective atmospheric remote sensing system providing accurate temperature and humidity profiles to least 10 km height in clear and cloudy conditions. Radiometrics Microwave Profiler (MP) products currently provide accurate temperature and humidity profiles in good agreement with radiosondes to 3 km height. Good agreement can be extended beyond 10 km height using variational retr ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  2. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: Space Lab Technologies, LLC            Topic: T7

    Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat. Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications. The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cultivation system ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  3. Coordination of Heterogeneous Robot Swarms for Planetary Logistics Operations

    SBC: Vecna Technologies, Inc.            Topic: T4

    Swarm robotics is one of the key enabling technologies for significantly extending mankind's reach beyond the Earth's surface. However, when bringing theory to practice, challenging problems related to the coordination and control of these swarms quickly arise. Vecna Robotics proposes a collaboration with MIT to extend existing autonomy behaviors and test platforms to address a class of pl ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  4. MarsOasis- An Efficient Autonomously Controlled Martian Crop Production System

    SBC: Space Lab Technologies, LLC            Topic: T7

    The MarsOasis™ cultivation system is a versatile, autonomous, environmentally controlled growth chamber for food provision on the Martian surface. MarsOasis™ integrates a wealth of prior research and Mars growth chamber concepts into a complete system design and operational prototype. MarsOasis™ includes several innovative features relative to the state of the art space growth chambers. I ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. A Robust Biofilm-Biomat Reactor for Conversion of Mission-Relevant Feedstocks to Products

    SBC: SUSTAINABLE BIOPRODUCTS LLC            Topic: T7

    Sustainable Bioproducts (SB) proposes to develop an encapsulated biofilm-biomat reactor that will efficiently convert mission relevant feedstocks to usable products under zero gravity conditions. The bioreactor will be based on SB’s proprietary fermentation platform for converting a wide variety of waste streams into a multitude of usable products. SB’s bioreactor platform is simple, does not ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  6. A Supported Liquid Membrane System for Steady State CO2 Control in a Spacecraft Cabin

    SBC: REACTION SYSTEMS, INC            Topic: T6

    Reducing the allowable concentration of carbon dioxide (CO2) in spacecraft is a critical need for NASA. The system now used on the International Space Station (ISS) is the carbon dioxide removal assembly (CDRA). While it has performed well on the ISS, managers have concluded that using the device to reach the new ppCO2 limit of 2.0 mm Hg is not practical and a new method is needed.In this projec ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  7. Aeroservoelastic Multifidelity Design of Biomimetic Aircraft (AMuBA)

    SBC: INTELLIGENT AUTOMATION, INC.            Topic: T15

    NASA has been investigating morphing aircraft for multi-mission capabilities and performance improvements in existing fixed-wing aircraft. In addition, the design of aeroelastic aircraft that can control the structural flexibility to their advantage, is an open area of research and development. In spite of the plethora of work on morphing aircraft and long slender wings, the goal of fielding such ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  8. Sentient Science- A Multiscale Modeling Suite for Process and Microstructure Prediction in Metal Additive Manufacturing

    SBC: Sentient Science Corporation            Topic: T12

    In response to NASA’s topic T12.02 of “Extensible Modeling of Metallurgical Additive Manufacturing Processes”, Sentient proposes to incorporate its DigitalClone technique to develop a multiscale and multiphysics computational modeling suite to predict comprehensive outcomes from AM building processes, including geometrical accuracy, and resulting microstructure and defects. Figure 1 shows th ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. Femtosecond-Laser Fabrication of Waveguides in Laser Materials

    SBC: AKTIWAVE LLC            Topic: T8

    This proposal includes, for the first time, integrated theoretical models and experimental investigations to simulate and demonstrate femtosecond-laser-fabricated waveguides in crystalline dielectric materials. The numerical models will predict refractive-index changes potentially induced by self-focusing, heat accumulation, thermal stress, plasma formation and relaxation, and ablation. The influe ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. Validated Engineering Tools for Thin-Ply Composites

    SBC: Opterus Research and Development, Inc.            Topic: T12

    Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...

    STTR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government