You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  2. Development of Next-Generation Composite Flywheel Design for Shock and Vibration Tolerant, High Density Rotating Energy Storage

    SBC: MOHAWK INNOVATIVE TECHNOLOGY, INC.            Topic: N13AT022

    Under this Phase II effort, the design of a modular 60 kw (3.6 MJ) shock tolerant composite flywheel for backup/ride through power will be finalized. This composite flywheel design will make use of a novel low cost thermal press cure process to fabricate the individual composite rings used to build up the flywheel. The manufacturing process parameters used in previous hydroburst testing of initial ...

    STTR Phase II 2018 Department of DefenseNavy
  3. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications

    SBC: ADA Technologies, Inc.            Topic: N16AT008

    To meet Navy needs for high performance and safe lithium ion (Li-ion) batteries for naval aircraft, ADA Technologies Inc. (ADA) and its university collaborator propose to optimize and transfer a highly tunable, high performance and safe, block copolymer derived nanoporous separator. The innovative strategy provides a powerful tool to allow exquisite tuning of performance and safety features of the ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Fully Encapsulating Dielectrics for Gaseous Helium Cooled Superconducting Power Cables

    SBC: Advanced Conductor Technologies LLC            Topic: N16AT011

    The proposed program will develop dielectrics for dc superconducting power transmission cables that are cooled with cryogenic helium gas. The Dielectrics will be sealed again helium gas penetration and allow for an operating voltage of 12 kV in a pressure of 2 MPa at 50 K. The dielectrics will be designed for use with all helium facing components of power transmission systems based on CORC cables. ...

    STTR Phase II 2018 Department of DefenseNavy
  5. Small Team Command, Control, Communications and Situational Awareness (C3SA), SOCOM08-001

    SBC: CEEBUS TECHNOLOGIES, LLC            Topic: SOCOM08001

    SOF combat swimmers have a need for the continuous monitoring of each others relative position while diving and for the capability of being able to communicate with each other to help establish a common operational picture (COP).The C3SA system was previously developed under SBIR Topic SOCOM08-001 thru the receipt of both Phase I and Phase II SBIR awards.The C3SA established a stand-alone network ...

    STTR Phase II 2018 Department of DefenseSpecial Operations Command
  6. Medium Voltage Direct Current (MVDC) Fault Detection, Localization, and Isolation

    SBC: ISSAC Corp            Topic: N16AT009

    During the Phase II effort, the ISSAC Team will investigate several objectives and questions posed in Phase I efforts, in order to best develop a draft specification for NGES MVDC DLI systems. This includes exploring notional and conceptual architectures and discerning thresholds for DLI parameters; exploring individual and hybrid protection plan technologies to drive performance requirements for ...

    STTR Phase II 2018 Department of DefenseNavy
  7. Integrated Computational Material Engineering Approach to Additive Manufacturing for Stainless Steel (316L)

    SBC: Senvol LLC            Topic: N16AT022

    The objective in this project is to implement and validate a probabilistic qualification framework that will enable additive manufacturing (AM) materials and part qualification through the use of a data-driven predictive model within a statistical framework. Senvol seeks to develop and validate a data-driven ICME probabilistic framework for assisting qualification of AM materials and parts. Phase ...

    STTR Phase II 2018 Department of DefenseNavy
  8. Ignition Modeling for Present and Future Combustors and Augmentors

    SBC: COMBUSTION SCIENCE & ENGINEERING, INC.            Topic: N17AT003

    The ability to predict the ignitibility potential of a combustor at various operating conditions is not practical at this time due to the complexity of this process. Ignition within a gas turbine combustor is dependent on various parameters; including spark (or plasma) energy, flow conditions, fuel/air ratio, and fuel spray density. All these parameters must be properly predicted in order to effec ...

    STTR Phase II 2018 Department of DefenseNavy
  9. A Scalable Event Extractor for Multi-Level Event Data and Pattern Archiving: SEE

    SBC: INTELLIGENT AUTOMATION, INC.            Topic: N17AT022

    To address the need of auto-extracting data relevant to significant events and to archive patterns, Intelligent Automation, Inc. (IAI) team proposes to continue developing a Scalable Event Extractor for Multi-Level Event Data and Pattern Archiving: SEE. The key innovations of our proposed SEE system are (1) a large class of analytics that extract valuable and important information from raw data, a ...

    STTR Phase II 2018 Department of DefenseNavy
  10. Energy Efficient, Non-Silicon Digital Signal Processing (DSP)

    SBC: HYPRES, INC.            Topic: N17AT027

    Superconductor digital circuits, operating at very high clock speed, can directly process wideband digitized radio frequency (RF) signals. By integrating such digital processing circuitry together with superconductor analog-to-digital converters (ADCs), we propose to develop the next generation digital-RF receivers. Leveraging the recent development of multiple superconductor ADCs on the same chip ...

    STTR Phase II 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government