You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. GPU Acceleration of an Adjoint Enabled Real Gas Hypersonic Flow Solver

    SBC: SCIENTIFIC SIMULATIONS, LLC            Topic: T9

    The objective of this Phase 1 proposal is the Graphical-Processing-Unit (GPU) acceleration of a two-dimensional, unstructured, viscous Navier-Stokes (NS) solver for aerothermodynamic applications. The subject code employs a multi-species two-temperature chemically reacting real gas model and incorporates the exact discrete tangent and adjoint systems for the real-gas system, which has been used fo ...

    STTR Phase I 2021 National Aeronautics and Space Administration
  2. Additive Manufacturing of Inorganic Transparent Materials for Advanced Optics

    SBC: PRODUCT INNOVATION AND ENGINEERING LLC            Topic: N19BT028

    The objective of Phase II is to develop the AM process investigated in Phase I to fabricate optical components. The resulting optical components will be evaluated in terms of geometrical, mechanical, microstructural and optical properties to validate the effectiveness of the developed process. The objectives of the Phase II Base are to: 1. Naval optical component design, selection of material tail ...

    STTR Phase II 2021 Department of DefenseNavy
  3. Open Source Distributed Electric Propulsion MDAO Tool

    SBC: DESIGN ANALYSIS & RESEARCH CORP            Topic: T15

    The team of Design, Analysis and Research Corporation (DARcorporation) and University of Michigan (UM)nbsp; propose an open source Distributed Electric Propulsion MDAO (DEP-MDAO) Tool, in which a new framework for aircraft aeropropulsive design optimization that integrates aircraft sizing, propulsion system sizing and distribution, wing design and propeller design will be developed.nbsp;The core i ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  4. Discrete 3-D Electronics for Mobile Radiation Detection Systems

    SBC: RADIATION DETECTION TECHNOLOGIES, INC.            Topic: DTRA18B002

    Phase II will utilize knowledge gained from phase I work to develop and execute a manufacturing process suitable for producing quantities of 3-D printed discrete circuits for radiation detection systems.  The goal is to support mobile radiation detection system requirements for high voltage, analog amplification, and MCA functionality to produce differential pulse height spectra in time sequence. ...

    STTR Phase II 2020 Department of DefenseDefense Threat Reduction Agency
  5. Fatigue Prediction for Additive Manufactured (AM) Metallic Components

    SBC: PRODUCT INNOVATION AND ENGINEERING LLC            Topic: N19BT026

    In this Phase I work, we will expose the effects of an additively-manufactured (AM) part’s inherent defects (including both volumetric and surface defects) and residual stress on its subsequent fatigue strength based on carefully-executed manufacturing, microstructure characterization, numerical simulations, and mechanical experiments. Results from this study will leverage consolidated design an ...

    STTR Phase I 2020 Department of DefenseNavy
  6. Additive Manufacturing of Inorganic Transparent Materials for Advanced Optics

    SBC: PRODUCT INNOVATION AND ENGINEERING LLC            Topic: N19BT028

    The goal of the Phase I project is to demonstrate the feasibility of an AM process capable of depositing the required optical properties, full densification, and smooth surface finish through modeling the glass AM processing, developing the path planning for printing freeform optics, and evaluating the quality of the printed freeform optics with the proposed FFL . The specific objectives of the pr ...

    STTR Phase I 2020 Department of DefenseNavy
  7. Innovative Processing Techniques for Additive Manufacture of 7000 Series Aluminum Alloy Components

    SBC: PRODUCT INNOVATION AND ENGINEERING LLC            Topic: N18AT005

    By using a combination of a highly Gaussian laser beam source, wavelength beam combining and multiple laser beam energy (MBE) PINE and Missouri S&T have successfully demonstrated the ability to create and stabilize Meltpools on all aluminum alloys investigated in Phase I. The MBE system has successfully processed several aluminum alloys with the potential to meet the performance needs of replacing ...

    STTR Phase II 2020 Department of DefenseNavy
  8. Development of A Digital Assistant for Early Mission Analysis and Design

    SBC: MYCROFT AI INC            Topic: T11

    The objective of this Phase I STTR proposal is to develop a first prototype of a digital assistant to support NASA engineers in space mission engineering and design tasks in Pre-Phase A and Phase A mission studies. This technology will: 1) increase the quality and diversity of the designs explored during early stage mission concept studies; 2) decrease the time and resources it takes to perform su ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  9. Optimized Build Plate Design Tool for Metal Laser Powder Bed Additive Manufacturing

    SBC: PRODUCT INNOVATION AND ENGINEERING LLC            Topic: N17BT033

    Throughout the SBIR Phase I, it was shown that it is possible to develop a solution which was capable of procedurally identifying and generating the support structures necessary for powder bed additive manufacturing (AM). In addition, it was shown that this new combination of support structures greatly increases the likelihood of a quality build. Upon this body of knowledge, the Phase II base will ...

    STTR Phase II 2019 Department of DefenseNavy
  10. Innovative Processing Techniques for Additive Manufacture of 7000 Series Aluminum Alloy Components

    SBC: PRODUCT INNOVATION AND ENGINEERING LLC            Topic: N18AT005

    The goal of this STTR Phase I research proposal is to develop a proof of concept for a novel additive manufacturing (AM) process that will be capable of processing 7000 series AM aluminum alloys while minimizing defects, with an eventual goal of Phase II/III project to commercialize the developed technology. To achieve this goal, the technical objectives, the proposed technology includes the follo ...

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government