You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Innovative Wound Regeneration Support Approaches to Enable Rapid Treatment of Wounded Warfighters

    SBC: Zetroz Systems LLC            Topic: A14AT016

    Ultrasound is a therapeutic modality which has been used clinically for 60 years, but has been limited in practice by the complexity of the technology. Recent research has allowed for the development of a portable, wearable, long duration, low intensity therapeutic ultrasound system. The system is powered by battery, and can be applied by a user to deliver up

    STTR Phase II 2016 Department of DefenseDefense Health Agency
  2. Distributed, Passivity-Based, Aeroservoelastic Control (DPASC) of Structurally Efficient Aircraft in the Presence of Gusts

    SBC: Tao Of Systems Integration Inc            Topic: T401

    Control of extremely lightweight, long endurance aircraft poses a challenging aeroservoelastic (ASE) problem due to significantly increased flexibility, and aerodynamic, structural, and actuator nonlinearities. To obtain the benefits of increased aerostructural efficiency, the controller needs to trim at a specified optimal shape while minimizing structural fatigue from gust disturbances. Tao Syst ...

    STTR Phase II 2015 National Aeronautics and Space Administration
  3. Multifunctional Shielding and Self-Healing HybridSil Smart Composites for Space

    SBC: Nanosonic Inc.            Topic: T1002

    NanoSonic has developed revolutionary multifunctional, super lightweight, self-healing and radiation shielding carbon fiber reinforced polymer (CFRP) composites as a viable lightweight material for space applications such as primary or secondary structures on NASA vehicles, habitat modules, and pressure vessel structures. While current composites are lightweight, they do not offer reliable method ...

    STTR Phase II 2015 National Aeronautics and Space Administration
  4. ACE Booster

    SBC: GLOYER-TAYLOR LABORATORIES INC            Topic: T102

    GTL has been developing a suite of transformational technologies that have the capability to disrupt the traditional launch vehicle paradigm. BHL composite cryotank technology provides a four times improvement over large aluminum iso-grid tanks, offering a 6 percentage point improvement in small stage PMF. Superior Stability Engine is an innovative liquid rocket engine configured to maximize comb ...

    STTR Phase II 2015 National Aeronautics and Space Administration
  5. ShortWave Infrared Focal Plane Technology for Close-Range Active Mineralogy Mapping (SWIFT-CAMM)

    SBC: Wavefront            Topic: T801

    We propose to develop a Photon-Counting Integrated Circuit (PCIC) detector and focal plane array (FPA) with highest sensitivity, lowest noise and hence highest signal-to-noise ratio (S/N) among all FPAs covering the shortwave infrared band, for incorporation into a prototype imaging spectroscopy CAMM instrument for real-time operation on a planetary surface to guide rover targeting, sample selecti ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  6. Physics-Based Modeling Tools for Life Prediction and Durability Assessment of Advanced Materials

    SBC: ELDER RESEARCH INC            Topic: T1202

    The technical objectives of this program are: (1) to develop a set of physics-based modeling tools to predict the initiation of hot corrosion and to address pit and fatigue crack formation in Ni-based alloys subjected to corrosive environments, (2) to implement this set of physics-based modeling tools into the DARWIN probabilistic life-prediction code, and (3) to demonstrate corrosion fatigue crac ...

    STTR Phase II 2015 National Aeronautics and Space Administration
  7. Modified Acoustic Emission for Prognostic Health Monitoring

    SBC: Prime Photonics, LC            Topic: T1201

    Prime Photonics proposes to team with Dr. Duke of Virginia Tech to develop a multi-mode, enhanced piezoelectric acoustic emission sensing system to couple large damage events to local distribution of damage accommodation. Our system will be centered around an instrument designed to accept the output of a piezoelectric transducer sensitive to in-plane acoustic events. The signal processing path w ...

    STTR Phase II 2016 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government