You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  2. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  3. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  4. Acoustically/Vibrationally Enhanced High Frequency Electromagnetic Detector for Buried Landmines

    SBC: AKELA INC            Topic: A16AT004

    Laboratory investigations have suggested that acoustically or vibrationally inducing motion in buried targets can aid in improving target detectability through a characteristic response related to differential target motion. This gain is realized by adding an additional degree of freedom, modulation due to motion in the GPR return signal, to use as a discriminating feature. The AKELA team is propo ...

    STTR Phase I 2016 Department of DefenseArmy
  5. Identification of Multiple Illicit Drugs Using a Handheld Detector Based on Chemiresitive Sensor Arrays

    SBC: Next Dimension Technologies, Inc.            Topic: A16AT008

    Next Dimension Technologies and Caltech will jointly develop a handheld detector to meet the Armys need for a field-based illicit drug identification system. The project will focus on the design and development of a dual-mode chemiresistive sensor array capable of detecting key drugs of interest, including synthetic cannabinoids and opioids. Novel sensing materials, with enhanced chemical sensit ...

    STTR Phase I 2016 Department of DefenseArmy
  6. Nadir-Looking Synthetic Aperture Radar (NadirSAR)

    SBC: Goleta Star LLC            Topic: A16AT011

    Goleta Star and the University of Florida (UFL) will jointly develop Nadir SAR 3D imaging capability from a Circular SAR orbit that can be transitioned into selected Army applications, primarily existing single-channel radars. Both Goleta and UFL have 3D imaging background and relevant capability that will jointly feed into the desired imaging technology development. In addition Goleta Star has ...

    STTR Phase I 2016 Department of DefenseArmy
  7. Miniature Mass Spectrometer for Peptide Sequencing and Mobile Coupling with Separation Techniques

    SBC: Bayspec, Inc.            Topic: A16AT012

    Using advanced ion optics that was developed by Pacific Northwest National Laboratory (PNNL), BaySpec will develop a prototype of portable mass spectrometer (less than 40 lb. and 300W) with continuous atmospheric pressure inlet that is fully capable of uninterrupted on-line sampling from an ambient environment. The continuous nature of the inlet ensures full compatibility with separation technique ...

    STTR Phase I 2016 Department of DefenseArmy
  8. Wearable Neurophysiological Monitoring Device for Circadian Rhythm Assessment and Intervention

    SBC: Cognionics, Inc.            Topic: A16AT014

    This Phase I STTR project will develop a platform to demonstrate high-quality, multi-modal acquisition of neurophysiological signals, including EEG, heart rate/blood oxygenation via photoplethysmography (PPG), electrodermal (EDA) activity, temperature plus environmental factors such as ambient light and sound in a simple, wearable headband. The hardware will be coupled with the development of a cl ...

    STTR Phase I 2016 Department of DefenseArmy
  9. Multiple Hit Performance of Small Arms Protective Armor

    SBC: TRANSPARENT ARMOR SOLUTIONS INC.            Topic: A14AT017

    This proposal will investigate body armor systems to the effects of burst fire. In Phase I, the team of researchers will investigate the spatial distribution of impacts of common burst fire capable rifles, demonstrate a statistical analysis technique, and demonstrate a ballistic model approach while applying this research to a surrogate body armor solution. The program will begin with an analysi ...

    STTR Phase I 2015 Department of DefenseArmy
  10. Advanced Printed Circuit Board Design Methods for Compact Optical Transceiver

    SBC: ATTOLLO ENGINEERING, LLC            Topic: A15AT001

    As the warfighter is increasingly using more highly integrated instruments, e.g. a laser rangefinder (LRF) combined with a laser designator and an imager, the need to decrease the size of these components becomes more important. Compact small munition applications of rangefinders particularly place an emphasis on size of the optical front end. In order to make the transceiver more compact, speci ...

    STTR Phase I 2015 Department of DefenseArmy
US Flag An Official Website of the United States Government