You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Reverberation Mitigation of Speech

    SBC: MINERVA SYSTEMS & TECHNOLOGIES LLC            Topic: AF15AT17

    ABSTRACT: Speech recognition technology is in wide use today and has been successfully integrated in a number of applications. Most of these applications require a microphone located near the talker. However, when a distant microphone is used where the speaker is at some distance from the microphone as in a hands-free communication, or in a meeting room, there is a major problem with the captured ...

    STTR Phase I 2015 Department of DefenseAir Force
  2. Exploitation Algorithms in the Compressive Sensing (Sparse Measurement) Space

    SBC: MAXENTRIC TECHNOLOGIES LLC            Topic: AF15AT27

    ABSTRACT: In this proposal, the MaXentric team outlines its strategy for creating a Radar-based Compressive Sensing and Target Classification system, code-named Rad-CSC. In this Phase I, the team will implement and optimize compressive sensing and classification algorithms for use with conventional and synthetic aperture radar data. Data will be chosen from publicly available datasets, such as the ...

    STTR Phase I 2015 Department of DefenseAir Force
  3. Design, Reconfigure, and Evaluate Autonomous Models in Training

    SBC: TIER 1 PERFORMANCE SOLUTIONS LLC            Topic: AF15AT14

    ABSTRACT: The proliferation of autonomous- and human-machine systems necessitates the creation of new tools for system design and evaluation. Key among these are simulation testbeds that support interactions between multiple warfighters and systems, and methods for creating and integrating intelligent agent models into simulation environments. We see a significant opportunity to advance the state ...

    STTR Phase I 2015 Department of DefenseAir Force
  4. Production of Chemical Reagents for Prompt-Agent-Defeat Weapons

    SBC: NALAS ENGINEERING SERVICES INC            Topic: DTRA14B001

    The US DoD requires robust ways of neutralizing threats posed by hostile powers and terrorist organizations that may be in possession of dangerous weapons of mass destruction (WMDs). Unfortunately, the weapons currently available to the DoD do not offer a way for the WMD to be destroyed without risking the spread of that material throughout the area. The strategy for the defeat of biological weapo ...

    STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
  5. Portable System with Li Foil MWPC Neutron Detectors

    SBC: RADIATION DETECTION TECHNOLOGIES, INC.            Topic: DTRA14B005

    At the completion of the research and development effort a Li foil multi-wire proportional counter (MWPC) neutron detector with more than 625 cm^2 of active area will be included in a portable radiation detection system. The system is expected to have an intrinsic thermal neutron detection efficiency of 55% or greater and gamma-ray rejection ratio (GRR) of 1.0x10^-8 or better. A gamma-ray spectrom ...

    STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
  6. Secure Efficient Cross-domain Protocols

    SBC: SONALYSTS INC            Topic: AF13AT08

    ABSTRACT: The Sonalysts Team proposes to develop a solution to establish secure cross enclave network interfaces that facilitate the flow of data between different levels of classification while improving and ensuring both security and data integrity. We will develop a prototype software application that will complement Cross-Domain Solution (CDS) installations by standardizing configuration and ...

    STTR Phase II 2015 Department of DefenseAir Force
  7. Innovative, Rapid Non-Linear Physics-Based Aeroelastic Analysis System

    SBC: CONTINUUM DYNAMICS INC            Topic: AF14AT04

    ABSTRACT: Accurate aeroelastic predictions are critical to the development of aircraft and assessment of aircraft/store compatibility since structural deformation and aeroelastic instabilities during flight affect pilot/aircraft safety and mission success. Indeed, several fighter aircraft have demonstrated recurring susceptibility to Limit Cycle Oscillations (LCO) when certain external stores ar ...

    STTR Phase I 2015 Department of DefenseAir Force
  8. A Range Segment Upgrade for Air Force Satellite Control Network with Smart Antennas and Cognitive Satellite Radios

    SBC: INFOBEYOND TECHNOLOGY LLC            Topic: AF14AT16

    ABSTRACT: A range segment upgrade for Air Force satellite control network (AFSCN) will significantly improve system effectiveness via spectrum sharing and seamless interoperation. However, the upgraded system requires new capabilities such as real-time and accurate RF interference detection and mitigation, array antenna backlobe/sidelobe suppressions, accurate performance degradation prediction, ...

    STTR Phase I 2015 Department of DefenseAir Force
  9. Additive Manufacturing Plastic Materials with Improved Dielectric Breakdown Strength

    SBC: Printed Performance Innovations            Topic: AF15AT07

    ABSTRACT: Material extrusion 3D printing is an Additive Manufacturing method which utilizes a polymeric monofilanment as a feedstock in the fabrication of 3D objects. The relative simplicity compared to other AM technologies makes it an attractive manufacturing tool, however, characteristics inherent to this 3D printing method (namely air gaps between print rasters) makes it undesirable for the 3D ...

    STTR Phase I 2015 Department of DefenseAir Force
  10. Use of Highly Porous Polymer Beads to Remove Anti-A and Anti-B Antibodies from Plasma for Transfusion

    SBC: CYTOSORBENTS MEDICAL INC            Topic: DHP15B001

    The ready availability of universal donor plasma to rapidly treat massively bleeding hospital trauma patients and warfighters with combat casualties is a key element of current recommendations for trauma resuscitation, yet universal AB donor plasma is rel

    STTR Phase I 2016 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government