You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. An Ultra-Compact Low-Power THz Radio SoC with On-Chip Antenna and Energy Harvesting

    SBC: Digital Analog Integration, Inc.            Topic: A15AT005

    There is an unmet demand for ultra-low-power, ultra-compact and low-cost radios to address emerging sensing and communication needs for military and commercial applications such as IoT/IoE. To overcome the limitations in existing bulky and power hungry radios, we propose a disruptive solution by integration of a nano-scaled THz transceiver, on-chip antenna, and energy harvesting circuits in a form ...

    STTR Phase II 2016 Department of DefenseArmy
  2. Development of Adaptive Closure Models for Large Eddy Simulations of Lean Blow-Out Conditions

    SBC: CFD Research Corporation            Topic: AF16AT14

    Next-generation turbulent combustion models must enable accurate prediction of lean blow-out and flashback for complex geometries, fuels and operating conditions relevant to the Air Force. Improved models are needed to better predict kinetically and hydr...

    STTR Phase I 2016 Department of DefenseAir Force
  3. Energy Harvesting Fabric

    SBC: Streamline Automation, LLC            Topic: A15AT017

    A human produces more than 100 Watts of waste heat during normal activity. If a fraction of this heat energy can be harvested it can replace the stored chemical energy in one or more of the batteries typically carried by soldiers in the field. The current generation batteries, such as the BB2590 are bulky and rigid. The PowerFelt material developed by Wake Forest University is ideally suited for h ...

    STTR Phase I 2016 Department of DefenseArmy
  4. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD Research Corporation            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Program
  5. Impact of Hypersonic Flight Environment on Electro-Optic/Infrared (EO/IR) Sensors

    SBC: Analysis and Applications Associates, Inc.            Topic: AF15AT40

    EO/IR sensors can provide high spatial resolution images using multiple frequency bands ranging from the visible to mid-wave IR. EO/IR sensors have been very successful for terrain imaging from subsonic aircraft and from satellites. Imaging using these platforms has been studied extensively. EO/IR sensors can provide high spatial resolution images using multiple frequency bands ranging from the v ...

    STTR Phase II 2016 Department of DefenseAir Force
  6. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications

    SBC: GENECAPTURE            Topic: CBD15C001

    The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

    STTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  7. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance

    SBC: CFD Research Corporation            Topic: MDA14T002

    Thermally induced fatigue and residual stress introduced during fabrication are sources of failure in microelectronics, which raises reliability concerns for MDA and its system integrators. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a physics based modeling and testing protocol to correlate material properties and thermal loading conditions to stress ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  9. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications.

    SBC: Oceanit Laboratories, Inc.            Topic: N16AT008

    Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.

    STTR Phase I 2016 Department of DefenseNavy
  10. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for the creation of a common streaming model for 3D data that is agnostic to the display technology. To address this need, Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) propose to form a c...

    STTR Phase I 2016 Department of DefenseAir Force
US Flag An Official Website of the United States Government