You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. An Ultra-Compact Low-Power THz Radio SoC with On-Chip Antenna and Energy Harvesting

    SBC: Digital Analog Integration, Inc.            Topic: A15AT005

    There is an unmet demand for ultra-low-power, ultra-compact and low-cost radios to address emerging sensing and communication needs for military and commercial applications such as IoT/IoE. To overcome the limitations in existing bulky and power hungry radios, we propose a disruptive solution by integration of a nano-scaled THz transceiver, on-chip antenna, and energy harvesting circuits in a form ...

    STTR Phase II 2016 Department of DefenseArmy
  2. Analysis and Application of Treatments to Mitigate Exfoliation Corrosion (Delamination) of 5XXX Series Aluminum

    SBC: Oceanit Laboratories, Inc.            Topic: N18AT016

    Oceanit proposes to research and develop chemical or non-chemical methods and processes to impart surface morphology modifications to aluminum-magnesium (Al-Mg) alloys to mitigate and increase the exfoliation corrosion resistance.

    STTR Phase I 2018 Department of DefenseNavy
  3. Carbon NanotubeCopper Composite as Electron Emitter for Passive Spacecraft Discharging

    SBC: CFD Research Corporation            Topic: AF18AT011

    This SBIR project will develop and demonstrate efficient electron emitter based on carbon nanotubecopper (CNT-Cu) composite for passive discharging of spacecraft in plasma environment. A spacecraft moving through harsh plasma environment collects electrons, which leads to the spacecraft charging up to several kilovolts. High voltage between different parts of the spacecraft can ignite arcing, whic ...

    STTR Phase I 2018 Department of DefenseAir Force
  4. Coupled Multi-Physics Tool for Analysis of Structural Profile Disruption Effects of Aerovehicles

    SBC: CFD Research Corporation            Topic: AF17AT025

    High speed air vehicles operate at material strength performance limits and are at significant risk when subjected to additional localized heating that can result in softening, pitting and burn-through the material and potentially change the vehicle structural profile. These effects degrade aerodynamic performance. The team of CFDRC and UDRI proposed to develop, validate and deliver a comprehensiv ...

    STTR Phase II 2018 Department of DefenseAir Force
  5. Cubic Boron Nitride Claddings for Friction Stir Tooling

    SBC: Plasma Processes, LLC            Topic: N18AT026

    Friction stir welding (FSW) is an attractive joining method where high strength low porosity welds can be attained. However, the high temperatures and forces required for welding high strength materials like steel require the use of exotic tools. Cubic boron nitride (cBN)-based tools offer attractive tool wear characteristics in steels, but are very costly. Conversely, refractory metal alloys are ...

    STTR Phase I 2018 Department of DefenseNavy
  6. Detection of Radio Frequency and Magnetic Field Bioeffects in Living Cells

    SBC: Oceanit Laboratories, Inc.            Topic: AF18AT001

    Oceanit proposes to develop a system to characterize weak electromagnetic fields for the investigation of the effect of both thermal and non-thermal RF/magnetic fields on biological material, and to detect resulting biological impact of the energy deposited.

    STTR Phase I 2018 Department of DefenseAir Force
  7. Development of Adaptive Closure Models for Large Eddy Simulations of Lean Blow-Out Conditions

    SBC: CFD Research Corporation            Topic: AF16AT14

    Next-generation turbulent combustion models must enable accurate prediction of lean blow-out and flashback for complex geometries, fuels and operating conditions relevant to the Air Force. Improved models are needed to better predict kinetically and hydr...

    STTR Phase I 2016 Department of DefenseAir Force
  8. Dismounted Soldier Positioning, Navigation and Timing (PNT) System Initialization

    SBC: Integrated Solutions for Systems, Inc.            Topic: A17AT017

    Integrated Solutions for Systems, Inc. (IS4S) and teammate Auburn University (AU) propose to develop a PNT initialization system for dismounted soldiers. The proposed system will enhance warfighters ability to operate immediately in a GPS denied environments once their mission begins and has wide commercialization potential outside of DoD. In Phase I, the feasibility and expected benefits of integ ...

    STTR Phase II 2018 Department of DefenseArmy
  9. Energy Harvesting Fabric

    SBC: Streamline Automation, LLC            Topic: A15AT017

    A human produces more than 100 Watts of waste heat during normal activity. If a fraction of this heat energy can be harvested it can replace the stored chemical energy in one or more of the batteries typically carried by soldiers in the field. The current generation batteries, such as the BB2590 are bulky and rigid. The PowerFelt material developed by Wake Forest University is ideally suited for h ...

    STTR Phase I 2016 Department of DefenseArmy
  10. Fine Powder Cathode and Separator Binder Characterization for Thermal Batteries

    SBC: CFD Research Corporation            Topic: MDA16T001

    Fine powder thermal battery cathode materials can exhibit challenging flow properties which makes processing with automated presses difficult.Granulating these powders can substantially improve flow properties and reduce the tendency for powder segregation during handling and pressing operations.Additionally, the properties of MgO that lead to good performance in thermal battery separators are not ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government