You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Multiphase Modeling of Solid Rocket Motor Internal Environment

    SBC: CFD Research Corporation            Topic: T1

    Solid rocket motor (SRM) design requires detailed understanding of the slag accumulation process in order to: predict thrust continuity, optimize propellant conversion efficiency, predict coning effects from sloshing, and to assess potential orbital debris (slag) hazard. Current state-of-the-art models for SRM environment do not have the capability to simulate the accumulation and dynamics of slag ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  2. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion During Early Lift-Off

    SBC: CFD Research Corporation            Topic: T1

    Launch vehicles experience extreme acoustic loads dominated by rocket plume interactions with ground structures during liftoff, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling turbulent plume physics are too dissipative to accurately resolve the acoustic propagation and detailed vehicle ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  3. Novel Circulating RNA-based Markers as Diagnostic Biomarkers of Infectious Diseases

    SBC: CFD Research Corporation            Topic: CBD18A001

    In resource limited settings, rapid and accurate diagnosis of infections is critical for managing potential exposures to highly virulent pathogens,whether occurring from an act of bioterrorism or a natural event. This is especially important for hard to detect intracellular bacterial andalphavirus infections, that overlap symptomatically and often treated empirically due to a lack of reliable and ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  4. Prediction of Plume Induced Rock Fracture for Landers

    SBC: CFD Research Corporation            Topic: T9

    The landing surface damage and liberation of debris particles caused by rocket plume impingement flow during spacecraft propulsive landing on unprepared surfaces of Moon, Mars, and other celestial bodies poses a high risk for robotic and human exploration activities. Simply determining whether the plume induced loads exceed the bedrock bearing capacity threshold is not sufficient. An integrated m ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. A Scalable Gas-Particle Flow Simulation Tool for Lander Plume-Surface Interaction and Debris Prediction

    SBC: CFD Research Corporation            Topic: T9

    Spacecraft propulsive landings on unprepared regolith present in extra-terrestrial environments pose a high risk for space exploration missions. Plume/regolith interaction results in (1) the liberation of dust and debris particles that may collide with the landing vehicle and (2) craters whose shape itself can influence vehicle dynamics. To investigate such gas-granular interactions for large-scal ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  6. Additive Manufacture of Refractory Metal Propulsion Components

    SBC: Geoplasma, LLC            Topic: T9

    Niobium alloy (C-103) reaction control system (RCS) chambers have been used on numerous NASA programs. However at elevated temperatures, the strength of C-103 decreases significantly. Higher strength niobium alloys have been developed, but these alloys lack the formability of C-103. Recently, Additive Manufacture (AM) of niobium and C-103 has been demonstrated using powder bed electron beam me ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  7. Structural Nervous System

    SBC: Gloyer-Taylor Laboratories LLC            Topic: T12

    GTL proposes to further the development of its SNS technology towards adoption into aerospace structures. The SNS technology is an enabler technology for the expanded use of structural health monitoring systems. It allows the large data architectures needed for these types of systems to be implemented with minimal mass and impact to structural performance. GTL will accomplish this by automating th ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  9. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: MORNINGBIRD MEDIA CORPORATION            Topic: T12

    Under the support of a FY 2016 NASA Phase I Small Business Technology Transfer (STTR) contract (NASA contract number NNX16CM40P), Morningbird Media Corporation in collaboration with Alabama A&M University Research, Innovation in Science and Engineering (AAMU-RISE) Foundation, has devised a unique method for an additive manufacturing technique for the direct 3D printing of functional electronics. T ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  10. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point ofCare Applications

    SBC: GENECAPTURE            Topic: CBD15C001

    GeneCapture, Inc. is proposing to develop a rapid in vitro diagnostic prototype using our patented molecular-based CAPTURE (ConfirmActive Pathogens Through Unamplified RNA Expression) assay. Based on the results and experience gained in our Phase I STTR contractHDTRA1-16C-0061: Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications, we p ...

    STTR Phase II 2018 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government