You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Optimization of Fatigue Test Signal Compression Using the Wavelet Transform

    SBC: ATA Engineering, Inc.            Topic: N18BT029

    Traditional approaches to accelerated fatigue testing rely on heuristic methods with thresholds based mostly on experience and engineering judgment. These methods generally do not apply to the multiaxial dynamic loading situations characteristic of most aerospace applications and often result in uncharacteristic fatigue damage and failure modes during testing. To overcome the limitations of tradit ...

    STTR Phase I 2018 Department of DefenseNavy
  2. Novel Circulating RNA-based Markers as Diagnostic Biomarkers of Infectious Diseases

    SBC: CFD Research Corporation            Topic: CBD18A001

    In resource limited settings, rapid and accurate diagnosis of infections is critical for managing potential exposures to highly virulent pathogens,whether occurring from an act of bioterrorism or a natural event. This is especially important for hard to detect intracellular bacterial andalphavirus infections, that overlap symptomatically and often treated empirically due to a lack of reliable and ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  3. Marburg Virus Prophylactic Medical Countermeasure

    SBC: MAPP BIOPHARMACEUTICAL, INC.            Topic: CBD18A002

    There are currently no vaccines or therapeutics available for Marburg Virus Disease (MVD). Given the specter of weaponization and the terriblemorbidity and high mortality rate of MVD, this represents a critical threat to the operational readiness of the Warfighter. While traditionalvaccines have proven to be a huge contribution to public health, they do have some limitations especially in the cont ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  4. Marburg Virus Prophylactic Medical Countermeasure

    SBC: Flow Pharma, Inc.            Topic: CBD18A002

    Flow Pharma, Inc. is a biotechnology company in the San Francisco Bay Area developing fully synthetic cytotoxic T lymphocyte (CTL)stimulating peptide vaccines for Marburg virus. The FlowVax vaccine platform allows us to create dry powder formulations of biodegradablemicrospheres and TLR adjuvants incorporating class I and class II T cell epitopes. FlowVax vaccines can be designed for delivery by i ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  5. An Integrated Materials Informatics/Sequential Learning Framework to Predict the Effects of Defects in Metals Additive Manufacturing

    SBC: Citrine Informatics, Inc.            Topic: N18AT013

    In this project, Citrine Informatics and the ADAPT Center at the Colorado School of Mines propose to build an informatics-driven system to understand the effects of defects in additive manufactured parts. The entire history of each sample will be captured on this system; from specific printing parameters and details of precursor materials through to part characterizations and performance measureme ...

    STTR Phase I 2018 Department of DefenseNavy
  6. Analysis and Application of Treatments to Mitigate Exfoliation Corrosion (Delamination) of 5XXX Series Aluminum

    SBC: Oceanit Laboratories, Inc.            Topic: N18AT016

    Oceanit proposes to research and develop chemical or non-chemical methods and processes to impart surface morphology modifications to aluminum-magnesium (Al-Mg) alloys to mitigate and increase the exfoliation corrosion resistance.

    STTR Phase I 2018 Department of DefenseNavy
  7. Situational Awareness for Mission Critical Ship Systems

    SBC: IERUS TECHNOLOGIES, INC            Topic: N18AT009

    The US Navy operates a vast fleet of combat and support vessels with complex power control systems under the control and decision authority of human operators. Several current resources such as SPY-1D radar and Vertical Launch System (VLS) and future resources such as railgun, AMDR, and high energy laser (HEL) are energy hungry, exceeding current and planned power generation capability when deploy ...

    STTR Phase I 2018 Department of DefenseNavy
  8. Environmental Temperature Sensing Tow Cable

    SBC: Makai Ocean Engineering, Inc.            Topic: N18AT017

    The U.S. Navy currently utilizes a number of towed systems from surface ship and submarines for sensing and communication applications. In a number of these cases, a tow cable extends either down from a surface ship or up from a submarine through the upper part of the water column where seawater temperature can be both highly variable vs. depth and dynamic in time and geographic location. Having a ...

    STTR Phase I 2018 Department of DefenseNavy
  9. Active Imaging through Fog

    SBC: SA Photonics, Inc.            Topic: N18AT021

    Active imaging systems are used to for imaging in degraded visual environments like that found in marine fog and other environments with a high level of attenuation and scattering from obscurants like fog, rain, smoke, and dust.These systems are still limited in range and resolution. SA Photonics is taking advantage of multiple image enhancement techniques, like wavelength tunability, pulse contro ...

    STTR Phase I 2018 Department of DefenseNavy
  10. Cubic Boron Nitride Claddings for Friction Stir Tooling

    SBC: Plasma Processes, LLC            Topic: N18AT026

    Friction stir welding (FSW) is an attractive joining method where high strength low porosity welds can be attained. However, the high temperatures and forces required for welding high strength materials like steel require the use of exotic tools. Cubic boron nitride (cBN)-based tools offer attractive tool wear characteristics in steels, but are very costly. Conversely, refractory metal alloys are ...

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government