You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Rydberg-atom RF Sensors for Direction Finding and Geolocation (RADARS)

    SBC: COLDQUANTA, INC.            Topic: AF17AT028

    ColdQuanta, in partnership with Dr. Zoya Popovic at the University of Colorado at Boulder, proposes to develop a three-dimensional quantum-enhanced radio-frequency (RF) signal sensor and direction finder. Our approach combines Rydberg-atom-based RF electrometry and discrete lens arrays (DLAs) of planar antennas. The DLA will serve as a Fourier optic for an incident wave, and a Rydberg-atom RF elec ...

    STTR Phase II 2018 Department of DefenseAir Force
  2. A GREEN AND UNIQUE THERMOSETTING-THERMOPLASTIC POLYCARBONATE

    SBC: INSTRUMENTAL POLYMER TECHNOLOGIES, LLC            Topic: 16NCER2B

    Of the 300 million tons of plastic produced per year most will require 500 years to biodegrade. Currently only 9% is recycled, and 50 million tons of thermoset plastic produced annually that can't be recycled. _x000D_ _x000D_ This project will develop a sustainable and easily biodegradable polycarbonate plastic that is uniquely a recyclable thermoset resin. We call it a thermosetting thermoplastic ...

    SBIR Phase II 2018 Environmental Protection Agency
  3. Provably Unclonable Functions on Re-configurable Devices

    SBC: IERUS TECHNOLOGIES INC            Topic: A18BT001

    The ability to authenticate electronic devices is an important step towards modernizing the hardware/software of our Nations communication systems. Protecting these targeted networks and devices from malicious cyber-based attacks is becoming increasingly important as the technological and cyber capabilities of our adversaries continue to advance. In addition to network security, device authenticat ...

    STTR Phase I 2018 Department of DefenseArmy
  4. On Demand Energy Activated Liquid Decontaminants and Cleaning Solutions

    SBC: TDA RESEARCH, INC.            Topic: A12AT005

    On-site activated decontaminants will revolutionize chemical and biological decon because the activated solution is produced on demand, without the limitations of traditional pre-made mixtures. TDAs system uses electrical activation to convert battery power into reactive chemicals that quickly destroy chemical and biological warfare agents. Prior to activation, the decontaminant mixture can be saf ...

    STTR Phase II 2018 Department of DefenseArmy
  5. Development of Innovative Broad-Spectrum Analysis Methods for PFAS

    SBC: SEACOAST SCIENCE, INC.            Topic: 17NCER3A

    This SBIR addresses EPA’s need for improved sampling and analysis technologies to detect Per- and Polyfluoroalkyl Substances (PFAS). PFAS are used in firefighting sprays, at airports, and for wild fires, and have been used in textile treatments (e.g., it is a component in Scotchgard). It is estimated that 65 million Americans are at risk of PFAS exposure in their drinking water. Seacoast propose ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. Greener Plastics with High Heat Tolerance for Additive Manufacturing

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: 17NCER5B

    Advances in materials and automation are rapidly reshaping the American manufacturing economy. These advances must be embraced to sustain a strong manufacturing sector in the United States. Additive manufacturing is possibly the fastest growing example of this trend, growing at an astonishing compound annual growth rate of 25.7%. The plastic materials market for additive manufacturing, valued at $ ...

    SBIR Phase I 2018 Environmental Protection Agency
  7. A Green Rooftop System for Commercial Buildings with Superior Energy Efficiency

    SBC: XIMAX Technologies Corporation Ltd            Topic: 17NCER6B

    This proposed project will develop a highly modularized green rooftop system that is not only longlasting but also assemble-able/disassemble-able. At roofs' end-of-life, it can be disassembled and_x000D_ 100% recycled. At buildings' end-of-life, if the roof still has enough useable life, it can be disassembled and reused elsewhere. Major environmental benefits of this technology are 1) nothing fro ...

    SBIR Phase I 2018 Environmental Protection Agency
  8. Renewable Bioplastics Production

    SBC: ALTEX TECHNOLOGIES CORPORATION            Topic: 17NCER5A

    Altex’s Renewable Bioplastics Production (RBP) technology meets the Greener Plastic Manufacturing needs; to eliminate harmful-petrochemical feed sources, to accomplish toxic-free, low-energy, low cost bioplastics production, to reduce Green House Gas (GHG) emissions, and to have environment friendly-biodegradable bioplastics. Altex’s proposed RBP technology combines a novel feeding-sizing-pret ...

    SBIR Phase I 2018 Environmental Protection Agency
  9. Logistics Augmented Reality Real-time Efficiency Enhancement System

    SBC: INTELLISENSE SYSTEMS INC            Topic: DLA181001

    To address the DLAs need for the implementation of augmented reality (AR) in DLAs procurement, logistics, and distribution processes, Intellisense Systems, Inc. (ISS) proposes to develop a new Logistics Augmented Reality Real-Time Efficiency Enhancement (LARREE) system. LARREE is based on novel ultra-low-cost infrastructure enhancements for real-time tracking, using interoperable software database ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Reverse Engineering and Manufacturing of Alternative Display Equipment

    SBC: INTELLISENSE SYSTEMS INC            Topic: DLA182004

    To address the Defense Logistics Agency (DLA)s need for KWD-ML-4-115AL alternative supply sources, Intellisense Systems, Inc. (ISI) proposes to develop a new Reverse Engineering and Manufacturing of Alternative Display Equipment (RE-MADE) process specifically to reverse engineer (RE) the KWD-ML-4-115AL display to improve product availability and increase competition. The proposed RE process is bas ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government